The ip is right in printer but wrong when I try to make wireless from USB
I have made a static IP address for the printer and put it in the printer as well. But when I use the software to set it up, it tries to ping an obscure IP that is not part of our LAN. How can I get it to Ping the IP I need it to ping? Is there a file I can edit to get it to choose the right IP?
Yes right... OJ J6480 sorry about that. When I worked at HP I uploaded LJ drivers to the web.
ANYWAY.... WPA-PSK... pointing to my router, my LAN, Right DNS Subnet etc.
The IP I chose was from the DHCP range. Do you think that is my problem? I made it a static IP. But I had this problem before I made it a static IP.
Ran the diagnostic program. It seem to point out my firewall. I made a few changes in my firewall. But I still can't print.
I'm wondering if I should uninstall the software on my laptop and reinstall it all over again. This is so frustrating because when I first installed it, it worked fine. Now I am having all kinds of problems and have to use the USB to print which I don't want to do.
Similar Messages
-
I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously. The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.
You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens. -
I'm getting the message, "Your Apple ID has been disabled," when I try to make a purchase. I reset my password as directed (several times) and updated it in my account, but I'm still getting the same message. What do I do?
You need to contact support:
http://www.apple.com/support/itunes/ww/
Enter country and select bottom contact support link on the left on the next page that loads.
AC -
I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?
You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.
-
jsut update the adobe reader to version xi but why when I try to typing some information, no copy and paste function available?
What is your operating system?
"type some information" into where - a form field?
"no copy and paste function available" - what exactly does that mean? -
firefox keeps crashing when I try to launch it. I uninstalled the program, but now when I try to download it from your website the download freezes with 1 second left. This has happened several times.
Hello Deb,
Something fishy going on with those particular files. But without looking at them directly I couldn't say what. Usually in a case like this the problem is some of the metadata that is attached to the file. Where did these files come from? A camera, a scanner, the internet?
An explanation about the Watched Folder function: It looks for changes to a folder, not just automatically grabbing whatever files are in it. Generally, you want to select an empty folder as a Watch Folder. Once this has been set up, as you add files to this folder they will be imported into the Organizer. If you start with a folder full of images, those will be ignored, any new items will be added.
-Brett -
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB -
I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the following choices: Shortcut, Bitmap Image, Contact, Microsoft Word Document, Journal Document, Microsoft Powerpoint Presentation, Text Document, Microsoft Excel Worksheet, and Briefcase. No new folder choice. Anyone have any ideas how I can correct the problem?
This support forum is for Firefox related issues. The volunteers on this forum can only help with Firefox issues.
Please consider contacting another support service like [http://www.ask.com/answers/browse?o=0&l=dir&qsrc=321 Ask.com].
Sorry. -
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine. This only happens when the document has print that is close to the edge.
I am using Adobe 10.1.2 with Windows 7.
Thank you in advance for your thoughts and helpAs for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.
-
Can anyone help?
Please look in the Applications for the most up-to-date version of Numbers. I suspect you got a free upgrade to OS X Mavericks and also updated your iWorks apps. If that is correct you have two versions of number on the computer, you cannot open a new file with the older version of Numbers, this is what I am guessing you are attempting.
-
hi i am having a problem with importing from the Bin to The desktop i have just reinstalled
logic and this is somthing new for me can someone help me please walterHi wallyatworku2, do you think you could manage to post a screenshot here on the forum, of your Track Window and Bin and also the allert generated bij Logic?
-
Has anyone had this issue where HBOGO won't download and is greyed out?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to settings>iTuens and App Store and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I recieved an ipod 5 for a early christmas present a day ago, I already owned an ipod 4 so i just used my info from that ipod as a back up for my 5g. but now when i try to download music from itunes it says i must use my security questions (which i made over a year ago) I can't remember the answers and i can't get on the email that it sends the reset info to. i don't know what to do and its really frustrating. please help ASAP!
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
Whichever method you use, you probably won't get a response until the 26th. If you absolutely must make a purchase before then, create a new Apple ID; you won't be able to transfer previous purchases or iTunes Store credit to it.
(95471) -
Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account. Please help me and tell me what I am doing wrong. Thx
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB
Maybe you are looking for
-
Code modification to read fixed vendor (Urgent)
Hi All, The below code is basically selecting the fixed vendor as per EORD table for a given material - plant combination. But the issue is for this combination, there can be different fixed vendors but during different times eg: Mtl - A, Plant - 10
-
How can I make Norton automatically move junk mail to a separate folder
In my old Outlook Express email program, my Norton AntiSpam filter created a separate local folder and automatically put identified spam into it so it did not clog my inbox. How can I make Thunderbird allow Norton to do this?
-
Email images and signatures not displaying cross platform??
I have noticed something odd when emailing people who are using windows. For some reason, attachments and signatures that are images (.jpg files that WILL open in a browser on the PC) or PDF's do not show up in the body of the email I send to them. Y
-
Relative positioning animation preset?
Hello friends, I am familiar with saving an animation preset with all the attributes... but how do I apply an animation/positioning preset, which applys to layers relatively to their original position? The Problem: when I save an animation preset, it
-
Regexp_like [[:space:]]
Hi, I wonder can you help, I have XML in a CLOB (I dont want to covert to XMLType), I want to find data that matches between XML tags e.g. <List1> to </List2>, the .* doesnt work when there are line returns in the clob, while the following works, sel