"the iphone could not be synced because the sync session failed to start" error!
I have been having all manner of problems synching my iPhone 4s; attempting to synch gets the dreaded ..."session failed"; synch appears to happen but doesn't; synch causes iTunes to hang requiring a force-quit etc etc.
This has been going on for months & has been driving me insane. Only happens with this one phone, not our other iDevices.
I tried every bit of trobleshooting advice I could find & nothing was working so I finally went to see a Genius at my local.
He was totally mystified so after 1/2 an hour of discussion he replaced my phone with a new one thinking it must be some weird hardware fault.
I plug the new phone in &... same problems.
I then started to try & isolate every posible cause.
I totally reinstalled iTunes, that didn't work. I removed all .plist files etc, that didn't work. So I started digging around in the iTunes files that hang around in the library folder & one by one I quarantined them, restarted iTunes, tried to synch etc etc.
Finally I struck gold!
I isolated the file iTunes Library Extras.itdb and on restart this file respawned & synch started instantly & finished perfectly.
So in short... if you are having this problem try moving this file elsewhere and then restarting iTunes & your synch to see what happens!
The way I fixed this (though I'm using a iTouch 4G): disconnect your iPhone from the computer, shut down iTunes, then reset your iPhone by holding the Power/Sleep & Home buttons together for 10 seconds. Restart iTunes, then when your iPhone restarts, reconnect it to the computer, and everything should work fine
Similar Messages
-
My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.
dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you -
I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"
This often happens when iTunes is not up to date. Try updating iTunes to the latest version, then try updating your phone again.
-
HT201210 the iphone could not be updated because the firware is not compatible
Hi
I am trying to update my Iphone software from 4.2.1 to the latest version.
I have tried restoring itunes, and also the update however the same message pops up at the end of installation.
the iphone could not be updated because the firware is not compatible
How can I solve this as it is driving me crazy and is slowly breaking my phone.
If you can help it is much appreciated.
Cheers
Lee Burgess
07411 989 241Have you previously jailbroke your iPhone or manually downloaded and pointed iTunes to a older or 3rd-party IPSW file?
Try the five suggestions here -> iOS: Resolving update and restore alert messages -
I'm trying to update my iPhone but am receiving this message: The iPhone could not be updated because the firmware is not compatible.
You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
the iphone could not be restored because the frimware file was corrupt. what i do.
Delete the ipsw file and allow iTunes to download it again.
-
I am trying to restore my phone, however it says that the iphone could not be activated because the activation server is temporarily unavailable. I have tried again a few times but still the same. Any suggestions?
Was your phone ever locked to a different phone carrier than the one your on now?
If so how was your phone unlocked?
Very rarely is the server unavailable.
Is your phone jailbroken or was your computer used to jailbreak a device? -
Iphone can not be updated because the firware file is mot compatible...
This is the message i have received when I wantted to update my Phone 4...any clues?
Thank you!Try a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
after downloading i-clouds I keep receiving a no service message and phone could not be activated because the activation server is temporarily unavailable.
I have read several questions on this but dont see a solution.Activation requires a SIM, assuming the SIM is functional it should simply activate.
The vast majority of activation issues are the result of devices that have been hacked or jailbroken. If that is the case, no support can be provided here. -
The iphone could not be sycned because the sync session failed to start
I usually have no problems with my iphone or mac, and can sync everything fine. But randomly today i tryed to sync some photos etc and it came up with this:
The iphone '_______ iphone' could not be synced because the sync session failed to startSee:
iphone could not be synced sync session failed to start...: Apple Support Communities
Sync Session Failed to Start iTouch iOS5: Apple Support Communities -
I have tried to install the 5.1,1 update but got the message that the firware is incompatible, how do i reslove this
You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
1) make sure you have a recent backup. TimeMachine is fine.
2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job. -
I am receiving this error message repeatedly, but it doesnt feature in any of the error code or message lists.
I have completed all the steps such as updating itunes, removing any other
USB devices, rebooting etc
Can anyone tell me what the error message means and how to get it sorted? Thanks!Are you sure your phone is a 3GS and not a 3G? 3G IPhone cannot be updated any higher than iOS 4.2.1 and this might be the reason why you are getting the not compatible error.
-
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
Everytime I try to sync my iPod Touch with updated music from my iTunes library, I get the following error message: The iPod could not be synched because the sync session failed to start.
Please help!Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.
Maybe you are looking for
-
My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?
-
Microsoft Office 2008 crashes when printing since upgrading to Yosemite
Ever since upgrading my Macbook Pro (late 2009) to OS X Yosemite I'm having trouble with Microsoft Office 2008. Whenever I try to print from any of the Office programs (Word, Excel, PowerPoint), the program will crash and the file will not print. I a
-
Service.log keeps coming back in Home folder
Every time I log in, a file called Service.log appears in my Home folder. I delete it every time and when I log out and back in it just makes another. It didn't do this until recently, but I have no idea what caused it. How do I stop it from doing th
-
Third Party to convert files...!?
I've read through other topics regarding the lack of audio files in video clips. I am having that same problem, so I read through the topics. People mentioned using a "third party" to convert the audio files. My question is, how do you do that, and w
-
I've spent all day trying to sort out qemu. Want to use qemu and not vmware because my server is headless (No X) and want to run a virtual machine on it with apache server. I'm sure if I can get my head around it, itll be fine. but I cant seem to net