The ipod could not be synced. the disc could not be read or writtern to

Hi,
I am having some major problems with my Nano. I upgraded to the new firmware through the new iTunes about 10 days ago, but now it just doesn't work all I keep getting is the above message. What is upsetting me is that it worked fine until this firmware update.
I have tried following the other advice including resetting it, I have also tried factory restting it through iTunes and it still doesn't want to work.
I am running XP Pro SP2, and you cannot see the Ipod in the list of attached disc drives.
Please help as my nano is now useless.
Thanks
PJ
Compaq Presario Windows XP Pro

Hi PJ!
And have you seen all of the suggestions in this article?:
"Disk cannot be read from or written to" when syncing iPod
Also, you could try reinstalling your iPod's firmware, following the steps here:
What to do if iPod can't be updated because the firmware file was corrupt or not found
-Kylene

Similar Messages

  • Bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb)

    bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync, a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb required)

    Hi Terri 4514,
    If you are having a "free space" alert when you try to sync, you may find the following article helpful:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    Regards,
    - Brenden

  • HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    Hello, BAHannebaum.
    The article below should resolve any device not being recognized in iTunes issue that you are experiencing.  The most common issues are the Apple Mobile Device Support driver or iTunes is outdated.  Start with the first step and test the results after each step processed. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • I click on itunes and this error comes up but it still opeitns , "The Disc "Content" cannot be read.  A folder was specified instead of a file".  So what do I do to get rid of it.

    I click on itunes and this error comes up but it still opens it, "The Disc "Content" cannot be read.  A folder was specified instead of a file".  So what do I do to get rid of it.

    I've encountered this same problem on multiple occasions. Sometimes it will happen for days at a time, then stop for months, then start happening again without rhyme or reason.
    This last bout has been the most severe, as my extensive library of movies (one one external HDD) and music (on another external HDD) wouldn't show up in iTunes. After reimporting and losing the library file again I started digging a bit deeper into solutions.
    I'm a few hours (hopefully it will stick) and many changes into reconstructing a new iTunes library file after having found a useful solution:
    http://apple.stackexchange.com/questions/73878/the-itunes-library-file-cannot-be -saved-a-folder-was-specified-instead-of-a-fi (I don't know if you saw the reply to your thread on stackexchange...)
    I tried to choose my old .itl when prompted; it wasn't recognized. I then created a new library in a new folder (iTunes 1, as suggested) and repeated the "choose library" step. The new file was recognized. In the past I would change my media folder location in iTunes preferences depending on whether I was importing music or movies. I've decided to leave that at the default location, but have unchecked the copy to media folder option in preferences. I'm hopeful that manually managing where the media are stored and where iTunes looks for them will permanently solve the problem.
    Take all of this with a grain of salt.... I hope it helps. Let me know if any of my steps are unclear or if you have any questions.
    D

  • Low battery ipod is not being read by my new computer

    I got a new computer recently and I hadn't thought of seeing if it could read my iPod or not. Today, I tried to charge it since it ran completely out of battery and I plugged it into my computer and nothing showed up. I read the pages on Windows not recognizing iPod, low battery, etc. but none of them has anything on Windows not reading the iPod software when the iPod's not working because there's no battery left.
    Please help me?
    iPod Nano (2nd Generation)   Windows XP Pro  

    The iPod will not be read by your computer if there is no battery power. Leaving it connected for a while (sometimes quite a long while!) usually cures this.
    However, sometimes if the battery gets completely discharged, simply connecting to a USB port on the computer doesn't supply enough power to "kick start" the charging process. In theory it should do, but yours seems to be a common problem.
    Do you have access to a wall charger?

  • TS1493 ipod nano displays cant sync. required disc cannot be found.  what do I do??

    I have just bought a 6th gen nano.  when trying to sync it I keep getting the message Cant be synced. required disc cannot be found.  Any help on getting around this???

    What have you tried in terms of troubleshooting so far?  Has the iPod ever been able to successfully sync with this PC and iTunes before or is this the first time you are connecting it?
    I would first make sure you are plugging the iPod into a high powered USB 2.0 port directly on your PC and NOT through a HUB.  If possible, use a different USB sync cable to rule out a damaged/faulty cable as well.
    Is the Enable Disk Use option ticked from under the iPod's Summary tab in iTunes?
    B-rock

  • IPod Nano not being read...

    Well, i have 2 computers and one is a Laptop, and when i logged in on my account and bought a song, it said if i wanted to Authorize this computer. I said yes, and plugged my Nano into it. I put a few songs on and it worked. I took it out, and now, when i try to plug it in again, it says on the lil message bar at the bottom that it is an unknown device. And it doesn't show on the side of iTunes.
    ???   Windows XP Pro   ???

    See these.
    iTunes 7 doesn't recognize the iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • My ipod is not being read, but my sister's is and we have the same ipod

    I have a 2GB grey nano ipod and its not showing up on my computer or itunes, but it will still charge it.
    HOWEVER, my sister has the same ipod, and hers is able to be read by the same computer that i am using. I dont know what is wrong with my ipod??? I have windows XP . my itunes version is updated, and its still not working. HELP!!
    please reply to my message i am clueless and i want my ipod fixed.

    Hey there,
    most likely its due to a software issue, as to what one i can't know for sure. but this link should help you sort out the root of the cause:
    http://docs.info.apple.com/article.html?artnum=93716
    hope it helps!
    e.e
    none   Other OS   wanna give me a mac?

  • I am trying to install Windows 7 via Bootcamp. When asked to insert Windows 7 install disc, my MacBook Pro fails to read the disc. However it reads any other disc. I'm running Snow Leopard 10.6.8. Any help?

    Thanks for anything guys.

    Sorry I'm a little late, my e-mail notifications died, I was wondering why it was so quiet. Here I thought I was getting better at this.
    Have you tried the USB thumb drive W7 installer way? I know 10.7 has an option now for installing a W7 installer iso onto a USB thumb drive but I don't know if 10.6 does. Search Google/yahoo for more information. Basically just make an iso of the W7 installer and copy it to the USB drive and it will boot via USB.
    At least I think yours can? Not sure which models work.
    Have you tried one of those CD disk cleaners? I bought one years ago and worked like a charm. (if it's dirty) It has a row of real fine bristles.
    Other then that you may have a dying drive?
    As far as games, make sure they are updated to run W7, other then that, that's Windows for ya.....

  • "iPod can not be read from or written to"

    Need a little help from the experts.
    I've scoured Apple's support site, this site and several others for mention of an error that reads like this:
    "Unable to read from or write to disk "(insert iPod name here)".
    Here's what happens:
    Open iTunes
    Plug in iPod (4th Gen 20GB)
    iTunes recognizes iPod
    Transfer of song begins
    Error occurs
    I've tried shutting down all my anti-virus/security but that's no help. There's also no ID of the error. I've seen a lot posted about "-36" and "-69" errors but this one has no such notation. I've also booted off iTunes and iPod software and reloaded to no avail. Can anyone here help?
    Thanks in advance!

    hi Matchman!
    apparently, the same rules for treating the -36 apply to this one too ... (the KB doc was just recently updated to say so.) see:
    -36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
    keep us posted.
    love, b

  • Error msg: user's ipod can not be read or written to. how do i fix this?!?

    after putting the latest ipod update on my mini and restoring i hav been havin problems with it. when transfering my songs to ipod it only transfered about 30 of 600 then it just stopped and came up with the error message i've tried restoring my ipod numerouse of times but still getthe same problem also i have tried unchecking some songs that may have caused problems but it stops transfering on all of them wat do i do lol

    Please recheck the following suggestions (one by one) from this article
    http://docs.info.apple.com/article.html?artnum=301267

  • Ipod restore not working?

    So about a week ago my main ipod, a 160 gb ipod classic has been having tons of issues, i don't know if they are related in anyway. First the center button became stuck under the click wheel. Then the ipod was needed to be restored. I did it and that barely solved anything, needing to restore it again after a couple of days. No matter how many times i restore it, the ipod is not being read by itunes and cant sync at all. If anyone knows what is going on, how i can fix it or how much it costs that would be awesome. Thnx

    since the 9/23/05 update, I've had some funky behavior with my (pre-clickwheel) 20GB iPod with dock. I've lost about 50 percent of my free memory space.
    So I thought I'd restore the iPod.
    But iPod updater won't see it. I can't click on update or restore. It just says plug in an ipod.
    Apple has instructions for the nano. But not for my model.
    I've tried reinstalling the 9/23 updater. won't let me (a newer version exists). Any ideas?

  • IPod not being read, iPod Updater will not work HELP!!

    needing help on a problem i've been trying to solve on my own for a day or so. My iPod will not be read by iTunes anymore, and iPod Updater will not Restore it to factory settings.. need some help here, need to know anything else? just ask. thanks for any replies.

    this happened to me yesterday. i spent 30 mins on the phone to a very helpful guy at apple, and we found out that i needed to disable USB 2.0 in Device Manager to run the restore then the updator. I disable the "Standard Enhanced PCI to USB Host Controller", rebooted then did the restore. Try it

  • Video Ipod not being read by CPU(Need Help other post did not help)

    My 30G Ipod is not being read by the coumputer, I tunes, or even the Ipod restore software. When i plug in my pod it turns on and charges...i can play music. When i turn it off there is a battery symbol and it says charging...i reinstaled ipod software...i did the two button reset, i tried it on all four of mr PC's Oh yeah...it make a soft high pitch noise when it charges.

    I can't help I'm afraid! I have exaclty the same unresolved problem and getting severely miffed that a £300 product has suddenly became a heap of junk.
    See it on ebay soon!

  • Ipod is not being indentified in my itunes i redownloaded it 3 times

    what do i do if my ipod is not being read in my i tunes?

    i ment windows 7 64 bit

Maybe you are looking for

  • Unable to take print out of JPEG image of DMS Document

    Hi Expert, I have used below method to print document.         CALL METHOD cl_gui_frontend_services=>execute           EXPORTING             document  = w_string             operation = 'PRINT'. I am able to take print out of all documents except JPE

  • External Link to Word document question

    Hello, fellow RoboHelpers! I have a quick question that I am hoping someone can answer for me. :-) I am using RoboHelp X5 and use Microsoft HTML Help (.CHM) as my file output. I would like to link a Word document to one of my topics, so when a user c

  • Java.lang symbols not found when compiling package classes

    I have a set of classes that I have wrapped up in a package. The package name and directory structure follow the standard required for each. These classes contain many java.lang.Math functions and java.lang.Double calls. Am I correct in that the java

  • Is it possible to set songs at different volumes?

    Some songs are way louder than others in a mix. How do you fix it?

  • Guest Account log-file location(s)

    I have used the "Guest Account" when people come to visit - it's great HOWEVER, in the interest(s) of saving some disk-space I want to delete the log-files that OS X 10.6.x keeps of the guest-account's useage / web-visiting activity and so-on - but I