The key to enable my microphone doesn't work on Windows 10!

Yesterday I updated to Windows 10 and I had the internal_power_error problem and i fixed it. The new problem is that I have a key on my keybored that enables the microphone by clicking Fn+F5. It used to work on windows 8.1 but now on windows 10 it doesnt. I tried enabling it from the stettings but it is already enabled. So i dont know what to do and Cortana wont work because my microphone is not working. PLEASE HELP !!!

Hi,
What is the OS of your machine ? Please try to enable Microphone in Recording devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

Hi everyone.
At the beginning I'm sorry for my bad english so I will say shortly.
A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
I can't speak with friends on skype ;( Help me. I hope you know what I say.

Hello
Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

U405 s2833 Microphone doesn't work after Windows 7 Upgrade

Hi all,
I had done the WIndows 7 Upgrade for my U405 S2833, everything is working fine but the microphone doesn't the drivers are installed and it appears at the device manager, msn, skype and some other IM programs but it just doesn't work, I had downloaded all drivers till date, but nothing seems to work, any idea?
Regards

Satellite L305-S5970
You may want to experiment with these drivers. The most recent is not necessarily the best fit.
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5859 - Released 07/13/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5789 - Released 06/25/09)
-Jerry

Satellite P300 - Microphone doesn't work after Windows 7 installation

Hi,
I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
Thanks
James

Hi
Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this it should be possible to use the internal microphone.
By the way: Which application you use for the internal microphone? Skype or something else?

Microphone doesn't work after Windows clean install

I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
I have tried the Toshiba Software Installer but it didnt help
I have tried both drivers on toshiba's website for Realtek but it still doesnt work
driver_audio_realtek_TC40053600B.exe
driver_audio_realtek_TC40064600A.exe
Anything else I can try. Please help
Thank you.

Satellite A135-S4677
After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
1st Hardware Drivers & Hardware Utilities
1) Chipset related
2) Display
3) Sound
4) All other hardware drivers & hardware utilities
2nd Toshiba Utilities & Toshiba Software
1) Toshiba Value Added Package (TVAP)
2) Toshiba Flash Card Utility (sometimes included in the TVAP)
3) All other Toshiba utilities and Toshiba software
Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
Intel Chipset SW Installation Utility for Windows 7 (32/64)
Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
Please let us know what happens. Good luck.
Mike

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need to use the speaker, somebody know what I need to do?

I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need to use the speaker, somebody know what I need to do?

Just thought that I'd report that I've decided on my solution.
It seems that just making do with what I can find on the US store is the easiest and perhaps also the best way of going about it. All other methods mean trouble. I'm lucky that China hasn't outright blocked the US store, as they HAVE blocked iTunes music store in China already (something about a song about Tibet caused them to block the store entirely).
So yeah, just going to deal with it I guess. I should be grateful I'm getting anything at all, considering the country I'm in. Still, I just feel so ripped off sometimes when I pay for expensive devices and I can't even get much out of them do to my region. iPhones cost around $700 in China because there's no company like AT&T that you can just sign a contract with to get one, so you have to pay up-front for the phone, and get less features out of it in the end. Makes buying smart phones look like a waste of time and money sometimes, since you can't use the device to do what it was built to do due to censorship and not having any content for your region (though they do have a lot of Chinese apps that I can't use due to not knowing Chinese).

Frequently the earphone and microphone doesn't work and I have to turn off in order to work, it ocurr whit skype and the ipod function, what I have to do?

Frecuently the earphone and the microphone doesn't work, specially with skype and the music (ipod), and I have torestart (turn off) my Ipad !.
What I have to do?
Thanks in advance for your support.

Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first.

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

I'm sure you have checked, but make sure your mute button on the keyboard is not on , also check that you haven't touched the space bar during a call as that mutes it.
Check your settings in Skype>Preferences, Audio/Video tab. Here's what mine look like:

IPhone 4S microphone doesn's work! Please Help!

My IPhone 4S is about a year and a half old and I got it last february. Now my microphone is not only not working in calls, but it doesn't work in apps either. It only works some of the time in my camera when i'm taking videos and in speaker phone during calls. I don't know what's wrong with it but I guess I'm not the only person with this issue. Also apparently Apple does absolutely nothing about it and just tell you to buy a new one. It seems like all IPhone 4(S) users have this problem eventually. Recently I took my phone off of insurance because of the cost before realizing that it doesn't work properly. Does anyone have suggestions or ways to fix this issue? I definitely cannot afford a new phone right now and i will definitely not be looking into another IPhone when i get an upgrade. Also, does anyone with the 5 have these problems after this long? Apple needs to fix this or they will lose me and possibly many more as a customer.

It seems like all IPhone 4(S) users have this problem eventually.
Nonsense.
Does anyone have suggestions or ways to fix this issue? I
Do the basic troubleshooting steps. If they don't work, there is a hardware problem.
iPhone: Hardware troubleshooting
definitely cannot afford a new phone right now and i will definitely not be looking into another IPhone when i get an upgrade.
So, you think that you're entitled to an extended warranty without paying because of your financial limitations or idle threats? Tell it to your parents.

Microphone doesn't work anymore

Hi all,
I don't know what happened on both my Mac (iMac 24" Intel and Macbook Late 2009), but on both I cannot use anymore the microphone (integrated or built-in).
I tried using a standard 3.5 jack headset and a USB one and I'm 100% sure that all my headset were working because:
In Windows they works;
They worked on both Mac since few days ago (I'm a trainer and I daily make lessons using Web-ex).
System preferences recognize the audio input (built-in and integrated), but it doesn't work (no activity on the bar, even if I remove the headset).
All software that needs a microphone doesn't work (Webex, Skype...).
I'm sure that there has been an update that compromised the correct functionality, as it is on 2 Mac.
Do you have any suggestion for me? I tested 2x 3.5 jack headset and 2x USB, I had the issue with 10.8.3 and I've it still with 10.8.4 (updated today).
I really don't know what to do!
Thanks in advance!

I have an iMac, Intel Corre i5 running 10.8.5 and the built-in mic is not working.
I have checked System preferences and it is set to built-in mic and not muted. If I physically tap near the built-in mic, I see the sound level bounce. But speaking, even if right next to the mic, doesn't register. In Garage band when I try to record my voice, it only picks up the finger snaps but not my voice (snapping to show a rhythm to my choir).
What is going on?

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
I have to use external microphone from Logitech now.
I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
It looks like the drivers for Windows 7 are wrong.

hey Killthebeeping,
if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
let windows install its generic driver.
once done plugin your usb mic and test it again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

The key to enable my microphone doesn't work on Windows 10!

Similar Messages

Maybe you are looking for