The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

Similar Messages

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Have you checked to see if Elentra has a firmware update since the new iOS release?

I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

After updating my 3gs to ios5 nothing works properly the phone is slow, no service, rapid battery drain, excessive heat when in use for longer periods of time, does not connect to vehicle stereo through usb, and screen is on but not responding to control

my 3gs battery dies rapidly and gives off excessive heat when in use no service anywhere, slow reponse time sometimes not at all like lights on but no one home, calls drop can text no 3g can not connect to vehicle usb as a note i restored the phone from my back up

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

Can anyone tell me if there is a way that I can set a web page up to load a new image each time a visitor refreshes the page?

I pray I can find a way to do this without losing my mind/writing and troubleshooting javascript. I would like to have three images per main department page on the web site link below, but I don't want them to show all at once. I would like a new, single image to show up each time a visitor visits or refreshes the page. Does anyone have a clue if i can do this in Dreamweaver and how? Please help if you can.
Here is the link: http://www.graphicmechanic.com/DEKALBCOUNTY/parks-and-recreation/index.html
See the words in big type "Parks and Recreation". My goal is to have the clown/face painting photo next to it change to something else each time it loads. Let me know if my explanation is confusing please.

Hi
Try using a javascript random image generation script - chose from one of the following - http://www.google.co.uk/search?client=firefox-a&rls=org.mozilla%3Aen-GB%3Aofficial&channel =s&hl=en&source=hp&q=javascript+random+image&meta=&btnG=Google+Search.
PZ

Firefox used to keep me Logged in to Comcast,MSN and Google. Now I have to loge each time I get on the internet. Can this be corrected?

This happened after I installed the latest version

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

HT1353 im trying to download games on to the ipod touch 2nd gen and looks like the software driver has been removed,what does that mean and how do i sort it?

i have an iod touch and aparently the software driver has been removed and i had it restored to factory settings as i bought it from someone,what does this mean and how do i solve the problem

Just what error message are you getting?
Are you trying to redownload them directly to the iPod?
If you are getting an error message that included Open GL 2 or similar that means that the app requires that but only the 3G and later iPods support that.

My new I phone 4s does not ring when someone calls. Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Try a different ringtone.
Reset or restart the device.

I need to bookmark a site where a new sesion is created each time I go to the site. How do I bookmark just the general web address?

I have a site that I use for work where each time you go to the site to log in it creates a unique session address but I need to have the general address bookmarked. I can't bookmark the site until after I perform the search.
So I type https://worldcat.org/wms and begin the search. That address is added to as the search progresses to the log in screen.

Hello,
In the Library:
* Bookmarks [[Image: Bookmarks-29]] > Show All Bookmarks
** Note in the Library, you can also manually add a bookmark by right clicking in the main pane and selecting "New bookmark" (as long as you are in one of the Bookmarks Menu, Toolbar, or Unsorted Bookmarks folders)
* If you click on an existing bookmark in the Library, the information stored in that bookmark should be located in the bottom pane. You can edit the link there.

Trying to setup TC to the internet (Comcast modem) and does not connect.

I'm replacing my old Netgear WiFi router with the TC. The provider is Comcast via their modem but, after setting up TC it does not connect to the internet. Of course Comcast service doesn't answer. I've tried the usual, unplugging the modem and TC and reconnecting, then resetting, etc, no connection to the internet. Do I need to directly bypass the WiFi router to start and connect the computer first and capture the DNS settings? Comcast usually does that automatically. After that connect TC to the modem and then manually edit settings? What settings use I edit?

Is the comcast modem a pure modem or also a router?
If it is a pure modem.. the TC must be in router mode.
If it has been used in another setup or is just being difficult .. reset the TC to factory and start over.
It is simply in DCHP and NAT for network setup.. it should get an IP and share it by default.
Normally you need to turn off the modem for several minutes to make the ISP gateway give up the MAC address of last connected item.
Tell us the exact model of the modem if the above doesn't work.
Is the TC new one?

Any way to remove the kitkat update? Once I downloaded the KitKat upgrade, i was unable to read text messages or MMS messages. Battery life really short, and now I'm unable to get it to load, phone is unusable.

Once I downloaded the KitKat upgrade, i was unable to read text messages or MMS messages. Battery life really short, and now I'm unable to get it to load, phone is unusable. took phone into the Version store, and they were not able to get it to work either..

I have 3 Motorola M on my account, one updated correctly, and one has not been updated to the new version. I have since taken the broken phone into the store, and they customer support people were not able to get it to load as well. Pretty much told me there is nothing they can do to make it work again, But I can buy a new phone at full price since I still have 6 months on my contract. Oh that's nice, I can see having to pay full price if the phone was broken by something I did, but not because of a software update. Its very frustrating and not right!

Is there anyway to either trade in your old Macbook Pro for a new version, or get a new power cord when the old one has been damaged?

Well i was just wondering.. since i do have a older version of the Macbook Pro.. and the fact that the power cord has been damaged

You can always get a price on what an Apple affiliate would give you for your old MacBook Pro by going to http://www.apple.com/recycling/gift-card/faq.html and reading the instruction for the reuse program. Or you can sell your old one on eBay (that's what I did - you'll get more for it). Apple doesn't do a simple trade-in.
Your cheapest route is just to buy a new adapter. If you don't know which adapter to get, call Apple and they can tell you, or visit your local Apple Store. They're about $80.
Good luck,
Clinton

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

I am using the iPad 3 64 and am an avid photographer . I have been using iPhoto as my editor when I download my pic to my iPad . I have upgraded to IOS 6. Please tell me why has the delete option has been removed iPhoto?

I am using the iPad 3 64 and am an avid photographer . I have been using iPhoto as my editor when I download my pic to my iPad . I have upgraded to IOS 6. Please tell me why has the delete option has been removed iPhoto?

That was the first thing I check, my X no longer exist, the app still works fine and does everything it did in the past, the the x (delete) option is no longer there. I have deleted and redownloaded the app and did a complete reset, X still not there as an option. Is anyone else experiencing this problem?

Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router

Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!

Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way - we also need the types of devices involved and how they are attached - kind of like a nework map - the more info that you provide, the more answers you will get.
Regards,
Charlie -

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

Similar Messages

Maybe you are looking for