The 'L' key on 2007 Macbook stopped working

As stated, My 'L' key on my 2007 macbook has stopped working however every other key works fine.
If it helps it running on Lion 10.7.5
If you have any advice, Please do share.
Thank you in advance! Very much appericated

dear chrisfromhopewell, I tried you advice but it still doesnt work ("L" key still not working, can you please try to help me. I am desperate...
Many thanks
Veedeekay

Similar Messages

  • Pressing 'A' key to lock keypad stopped working

    Up until yesterday, I've always been able to lock my keypad (Blackberry 8520) by holding down the 'A' key. Yesterday it stopped working for no apparent reason and I was wondering if anyone could tell me how to get it working again.

    Rob,
    Yes, we upgraded our entire system...ER, Unity, IPCC, and CM.  IBM was contracted to do most of the work and I know they want to install some additional updates to get us to the most recent version of 8.6.  Here are the versions we are running right now:
    Cisco Unified Communication Manager (Call Manager):    
    8.6.2.20000-2
    Cisco   Unified Contact Centre Xpress (IPCC):            
    8.5.1.10000-37
    Cisco   Unity Connection (voicemail):                    
    8.6.2.20000-76
    Cisco   Emergency Responder:                            
    8.6.1.10000-11

  • The volume keys on my MacBook Pro stop working after using headphones.

    The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
    I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
    Can someone please help!?

    I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
    I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
    Turn off laptop.
    Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
    This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over.

  • The "A" key on my macbook pro is not working Can I fix it myself?

    The "A" key on my macbook pro will not work.  How can I fix it?
          -----Earnie---------

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • My 2 year old tapped some keys on my Macbook and now the volume keys at top don't work. If I press F12, the dashboard pops up. How do I get it to work as it used to?

    My 2-year-old randomly tapped some keys on my Macbook and now the volume keys at top don't work. For example, if I press F12, the dashboard pops up, whereas previously it used to increase the volume. HELP! I'm a techno nitwit -  how do I get it to work as it used to?

    I did this myself recently while playing around with the settings - go to System Preferences and in there somewhere will be a setting saying - " use all function keys as standard function keys" or something like that. You need to deslect or say "no" and then it will work as it used to!

  • Volume keys: F10, F11, F12 stopped working as volume keys.  How to reset?

    On the MacBook, 13 inch OS X Version 10.8.2, Volume keys: F10, F11, F12 stopped working as Volume keys.  How do I reset them back to functio  as the Volume keys?

    System Preferences>Keyboard:
    - this is from Snow Leopard so Mountain Lion may be slightly different but the principle should be the same. If it isn't you need to ask in the Mountain Lion forum.

  • Hi i want to ask a question ok my MacBook stop working and all i want to know is why and how cand i get it repair

    I want to know why did my macbook stop working i can not login

    Considering that you're still running OS 10.5.8, that must be a pretty old MacBook. Instead of getting into an in-depth back and forth diagnostic discussion, I'd suggest bringing into an Apple Store for a checkout. Since repairs aren't cheap (if that's what's needed), you may end up simply replacing it. But does it not work even when plugged into the power adaptor?

  • Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

    Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

    That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • The editing feature of photoshop elements stopped working what is the solution

    the  editing feature of photoshop elements stopped working after i installed nik efex pro wacom pen.

    You need to remove third party plugin and try launching. You should find it in plugins folder either here C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins or C:\Program Files (x86)\Adobe\Photoshop Elements 10\Locales\en_US\Plug-Ins
    Else try skipping the loading of thirdparty plugins like below:
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl/cmd + shift as you click Editor/Edit.
       3. Continue to hold the keys until you see a message to skip loading of 3rd party plugins..Click yes and check.
    Thanks,
    Garry

  • Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

    hi

    Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to  Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
    I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
    Could someone please help? It'd be VERY much appreciated.

  • The left side of my trackpad stopped working on my macair

    the left side of my trackpad stopped working on my macbook air,how to fix?

    1) System Preferences > Trackpad > Point & Click > Secondary click > (make sure it is not set to a corner).
    2) Bring your machine in to Apple and have them check to see if your battery is swollen

  • Keyboard number keys 1 to 9 stopped working

    keyboard number keys 1 to 9 stopped working after last update

    Hello ali_besso,
    Start with the article below to troubleshoot issues with the article below. What you will want to do is to open up the Keyboard View on your Mac and test to see if it actually not responding to your input. You will also want to test it out in another user as well as trying to start up your Mac in Safe Mode. 
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Regards,
    -Norm G.  

  • Help please - have a Nano and a Shuffle and neither are working! The Nano wheel appears to have stopped working - I can't get it to do anything. I've done the reset,it worked the first time but not since. And the shuffle won't sync with my library!

    Hi,
    I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
    So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
    Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
    Thanks

    Hi Bblairjones,
    If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
    Apple Support: iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Regards,
    - Brenden

  • HT4550 The pdf engine in Safari has stopped working. I can no longer view pdf files in Safari. I get a black screen pdf files in Safari. Any ideas why?

    The pdf engine in Safari has stopped working. I can no longer view pdf files in Safari. I simply get a black window when pdf files are downloaded

    Hi..
    Go to   /Library/Internet Plug-Ins
    Move the AdobePDF browser plugin to the Trash.
    Try Safari.
    If you have problems locating the plugin...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    /Library/Internet Plug-Ins
    Click Go

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

Maybe you are looking for

  • Sync of iCal to Calendar in iPhone off by 1 hour

    This problem has just come up in a 2 week old iPhone 3GS. When I enter new events in iCal and sync with iPhone, the times are one hour later in Calendar. Appears to match the advance in 1 hour of Daylight Savings Time from Nov. - March. So, entering

  • Portage 3110CT factory restore

    Please I badly need to restore my protege 3110CT to factory settings and I do not have the factory CDs. The CD is dead and there is no way to get an USB installed also, so there is no way to do anything. Could some one help? It'll be very very much a

  • Recommended design for using multiple PGs for one ACD

    Ref:  ICM 8.5 with Avaya Aura CM 6.3 and AES 6.3 We have been told by Cisco that we should not have more than 3000 agents+CTI on our current PG pair.  Since we project we will exceed 3000 agents before the end of the year, we are planning to add anot

  • Time compression and Pan & Scan

    Hi I'm editing a PPV special, and the networks are requesting that the Sony Digibeta Master be "time compressed when available." Is "time compression" a feature in FCP, or is it a feature on the Digitbeta interface only (like the 7.5 IRE NTSC setting

  • TS1368 how do i fix error 4002 - can't connect to itunes store

    I upgraded to the latest version of itunes on my computer running windows 7 last week.  Since then I've been getting the error message 4002 when Itunes match tries to run. It says ""We could not complete your Itunes store request.  An unknown error o