The last itunes update has failed - getting error program C:/program files (x86)\itunes\itunes.exe - R6034 attemp tp load C runtime library incorrectlly. I have tried to repair and reinstall. getting same error - can ayone help

the last itunes update failed - getting error R6034 attemp to load C runtime library incorrectly. Program reference - Program C;/prgram files (x86)\tunes\itunes.exe - can anyone help. I tried to use epir and did an uninstall and reinstall and still geting same error

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Similar Messages

  • Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

    just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

    Best route here is to uninstall iTunes completely using the Windows Control Panel.
    Make sure you know exactly which version of Win 7 you're running.
    Restart your computer from cold (with no iTunes).
    Go to Apple website and download the correct version for your operating system.  Install following Apple prompts.
    Once installed, close iTunes.
    Restart your computer from cold (with new iTunes).
    Start iTunes - all should be operating well!  Good luck ...

  • The last 'An' update has bug; An error occurred. Please save your work and restart Edge Animate

    After the last Edge Animate I started to get this error:  An error occurred. Please save your work and restart Edge Animate.  Anyone else having this issue with version 1.5.0.217.23270
    I'm using Windows 7 Profession 64 bit.
    24 gb ram
    At the time of the error on timeline, around 21 second frame, only 4.82 gb of ram was being used and CPU was using less that 10% processing. No spikes. 

    Elaine,
    On the webserver its running fine for being partially completed.  http://dirtyhumanoids.com/publish/web/TonalpohualliAndTheEyeOfProvidence.html
    It's crashing within Animate on all 3 copies.
    Copy 1 was created and saved before last upgrade (no . 
    Copy 2 of this file was created before the update and saved a few times before and after the upgrade. 
    Copy 3, is just trying to figure out what went wrong with copy 2.  BTW, Copy 1 is also having the same issue. 
    The only thing I can think of that I might have messed up on was creating a picture into a symbol much late in the project.
    I wish I knew how to video record my desktop so you could analysis my Edge Animate.
    Regards,
    Matt

  • Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi Keen itunes User,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • HT201197 how do i fix this (the share operation DVD has failed Quicktime error 0

    Ho w do i fix this - The share operation DVD has failed Quicktime error 0

    Select a short section of your project and export as a Pro Res master file.
    If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
    Russ

  • Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may no

    Installed FF 16, 17, 18. Will not open in normal administrator login, nor with "Run as administrator" but will in W7 safe mode. Changed permissions (had to do it in W7 Safe Mode, normal login would not allow (logged in as an administrator) could not delete the Mozilla files in normal login. On rare occasions, with a new install, I could get it to open once, then not again. Searched the reg for any mention of Mozilla or FF and cleaned it. Tried FF safe mode, no luck. Checked permissions after taking ownership and propagating full ownership rights to all FF files, many reboots, no luck. Chrome, IE and SeaMonkey work fine. Using a fairly new install of W7 Professional 64 bit, on a Dell Optiplex 990 i7, 16GB ram. Had the same problem with another user on an identical box. No problem on other computers No other program problems.

    I should have been a bit more definitive.
    I have uninstalled FF, with the windows uninstaller, by manually cleaning the files and the registry of any mention of FF or Mozilla, and by running Revo uninstaller - always rebooting and checking to see if the files are indeed gone. (I have set windows file preferences to see all files, including system files.) I have run 4 AV/malware scanners and found nothing but a few tracking cookies. I download, from Mozilla.org, (http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/18.0/win32/en-US/Firefox%20Setup%2018.0.exe) a fresh copy of the Firefox Setup 18.0.exe each time and install when logged in as an administrator and choose "Run as Administrator". I get the same result each time I try to open Firefox. Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." This happens even when I run the .exe file from the x86 program directory. I have also attempted to run in XPsp3 compatibility mode to no avail,
    I make the following assumptions:
    The system is not infected
    I am doing clean installs
    There is no existing trace of FF on the system
    I get identical results on one other W7 64 bit Optiplex 990 system with an i7 processor and 16 GB or ram.
    I CAN run in windows safe mode with networking.
    I have no other software or hardware issues.

  • I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help?

    I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help? edit

    C'mon! Anyone???? I'm desperate!

  • I have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    Be good to know what the diagnostic results are.
    I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
    iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
    tt2

  • Hi my itunes program crashes when i try to access the itunes store.  Have tried to uninstall and reinstall to no avail.

    Hi my itunes program crashes when i try to access the itunes store.  Have tried to uninstall and reinstall to no avail.

    Me too - running iTunes 10.5.3 on Windows 7.  Will allow me to sign in to iTunes, download app updates and then if I either close iTunes or try to sign out of my iTunes account it all freezes.  So frustrating, because my understanding is that iTunes saves the library file when exiting.  So, everytime I update apps I lose all the downloads.

  • I just reinstalled a new HD and have forgotten my login and Key chain password. Can you help me to reset them? Thank you

    I just reinstalled a new HD and have forgotten my login and Key chain password. Can you help me to reset them? Thank you

    After powering the iPhone off and on, the light goes out but turns back on randomly or immediately after powering the iPhone on?
    Since nothing else you have tried has resolved it, try restoring the iPhone with iTunes from the iPhone's backup first.
    If no change after that, try restoring as a new iPhone or not from the backup.
    If no change after that, the iPhone has a hardware problem.
    Call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • I click on the Mozilla icon and it will not load. I have tried to uninstall and reinstall but that doesn't work either

    I have tried to open Firefox, but it just sits there and doesn't load. I have tried to uninstall and reinstall but that works for a few hours and then it goes back to not loading. I don't know what else to do to get it too load.

    Right-click on your Windows Taskbar and select Start Task Manager. Look in Task Manager for processes running that are Firefox-related, such as Firefox.exe or plugin-container.exe. If you see either of those, right-click each of them and select "End process". Then try again to start Firefox in [[Safe Mode]]. <br /><br />
    *If Firefox will start in Safe Mode, select the option you are presented with to disable your add-ons and plug-ins and restart Firefox normally. You likely have a plug-in, add-on, or a combination of two or more that is causing the problem. Because Firefox allows users to customize endlessly, sometimes there can be conflicts between customized items. From the Firefox menu bar, go to<br /><br />Tools -> Add-ons<br /><br />then re-enable them one by one, restarting Firefox after each and testing after each one to see which one or combination of two or more is causing the problem. <br /><br />
    *If Firefox will not start in Safe Mode, make sure you again check Task Manager and end any running instances, then uninstall Firefox and download a fresh copy from mozilla.org/firefox using another browser temporarily. Re-install Firefox (see: [[Installing Firefox on Windows]] for more help ) and try running Firefox again.
    Please report back your progress.

  • I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

    I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

    Check out this thread:
    https://discussions.apple.com/thread/3677426?start=0&tstart=0

  • I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    Does the regular Firefox 8 release version work or does the version crash as well?
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Keep getting a Runtime Error  Program Files (x86)...  R6034  An application has made an attempt to load the C runtime library incorrectly.  Also another pop up - Error 7 (Windows error 1114)

    I updated itunes.  Now it doesn't run.  I keep getting -" Runtime error Program Files (x86)...itunes helper  R6034  An application has made an attempt to load the C runtime library incorrectly.  Please contact support team."
      Well how do you do that without owning a MAC?  This error pops up every time I start my computer.  The other pop up says Error 7 (Windows error 1114)
      I have uninstalled itunes and re-installed it (I still get the pop up after itunes was uninstalled.) 
      I can't find a restore point before the latest update.  And I can't run itunes on my Windows 7 computer.  Any advice out there?

    Do the following:
    Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • HT1222 on the last itunes update it failed and now it will not open. i have tryed to uninstall and reinstall but that will not work.  any suggestions?

    itunes had a upgrade and it said it failed and i have tryed to uninstall and then reinstall , i havve run a reoair program and nothing seems to work.  any ideas

    Hi Brett 949,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

Maybe you are looking for

  • Itunes update DOES NOT WORK

    Apparently I am now one of many I know who are having trouble with this program. Auto Update installed itunes 5 which worked once, now it just bounces off the dock and does nothing, no window, not responding. All the music is still there but the prog

  • Cs4 opens cs3 files with errors

    Here's a big heads up for anyone considering upgrading to cs4 - don't!  I've been working on a cs3 project and decided to upgrade to cs4 for the extras in the 3D toolset.  All the Adobe propoganda implies this can be achieved no problem, as did soemo

  • Adding dinamic fields into table control..

    hi friends, i wan to knw , is it possible to add fields dynamically in table control? actually the requirement is like, it is not fixed how many fields will be their in table control, it may change depending upon date. so if u knw, please help me out

  • Req Help to Update LIKP-LIFSK,Delivery Header block through custom program.

    Hi everyone, Can you please suggest a FM or BAPI to update the delivery header block field, LIFSK, in LIKP table through FM or a BAPI. I tried using 'BAPI_OUTB_DELIVERY_CHANGE' as below to update the LIKP-LIFSK, but it is not working. DATA : ls_likp

  • How to create SAP_ALL Display Role without HR Transactions.

    Hi, Can someone help mem create an SAP_ALL Display only Role without HR Transactions. It takes lot of time to create a New role with SAP_ALL Template and manually change the Activity to display and de-activate HR Objects. Please let me know if there