The last upgrade to iphone5 coused a big problem with my phone signle it always shows' no servise' plz help my phone is new i have recently bought it .plz if u may offer a new update to fix the weak signle of iphone5.i trust u .so plz fix this bug.

plz help after the last update of the software my iphone 5 shows" no servise" no signle. plz if u offer a new update to fix this bug.

I would restore the phone as new
iTunes: Restoring iOS software - Apple
then get it replaced through apple

Similar Messages

  • In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

    In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

    Hit the '''F7''' key, you probably have Caret browsing turned on.
    http://kb.mozillazine.org/Accessibility.browsewithcaret

  • I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."

    I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."
    I'm still attempting to restore it, but the process goes as follows
    - Extracting software.
    - Waiting for iphone.
    - Preparing iphone software for restore.
    - Verifying iphone software.
    - Restoring iPhone software.
    It is at this point where it begins to load approxiamtely 10% and then freezes. I have had the handset connected 7 hours with no progress and this is my third attempt since Friday. Please help.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • VERY BIG PROBLEMS WITH MY ZEN MICRO AND MEDIASOURCE! PLEASE PLEASE PLEASE HELP ME! PLEASE RESPOND

    Ok so a while back I had to give up my computer because it wasn't working.
    I thought that with my new computer I'd be able to transfer all of my music from my zen micro onto my new computer.
    Now my new computer is set up and I have installed creative mediasource and everything. I started to transfer my music from my zen onto my computer. My first 2 songs transfered successfully onto my computer. On the third song, I get this message:
    "Unable to read file, file may be in use, missing, or corrupted."
    I thought that maybe it was just that one song so I shrugged it off. But then it says the same thing for every single other song that i have! Only my first 2 songs out of my entire music library on my zen will transfer!!!
    Please i really need your help!!!
    And say that there is no hope in getting the rest of my songs to transfer and i have to download 094 songs from limewire? I'll surely be arrested for downloading that much! What should i do if i must download all of them?
    And one more problem with my zen: Some of my Jump Little Children songs are doing something weird. The song will be fine and then a clip from another song will play during it! And then press next and it just keeps playing all of my Jump songs in order even though my player is on shuffle and they do the same thing with the clip from another song interupting it. Whats going on?
    Most importantly though, i really need the questions answered about transfering from my zen to my computer because i'll be getting a new player soon. But this is my entire music library at stake!! PLEASE RESPOND!!!

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • I have recently bought an Iphone 4s but since i've had it, it has been saying 'no service'. can anyone tell me how to fix this problem?

    Can someone please help me to fix this?
    Since the very first day i had the phone it has been saying 'no service'.
    when i turn it on it says 'searching' for at least 1 minute but after it says 'No Service' I dont know what to do as with previous Iphones i have never came accross this problem.
    would be great if someone could give me information on how to fix this.
    Thanks

    what did you phone carrier say when you contacted them about your cellular data issue?

  • I'm having big problems with my K72N-Delta-L and Apacer ram! Please help!

    Well, on almost every boot, the system hangs, starts beeping wildly, and my LEDs tell me that the system is in "early memory detection" .... What now? I have APACER 512mb ddr(266mhz) ... I just can't understand what's going on here... I've tried almost everything! could someone please help out?
    Thanks
    -M

    Acording to Msi test report that this ram is not certified.  But this may not be the problem.  Have you check to see if the ram is seated properly, Also provide the amps on each rails, this will be stated on the psu cover, and the power size of the psu.
    I know these boards are power eaters.

  • I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

    I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

    YAY!! I have Safe mode!!
    um, now what?

  • TS4062 Can not look at any videos on my iPad after I did the last upgrade how can I fix this

    Can not look at any videos on my iPad after I did the last upgrade how can I fix this

    Why not?  What happens when you try?

  • The spinning beach ball of death came with the last upgrade.

    I have used Firefox for a long time and it has always been instantly responsive. With the last upgrade, every click brings several seconds of waiting. I cleaned house - emptied caches, defragged, etc. - but the delay still persists. Performing the same operations in Safari and IE is still instant.

    di you update the new hard drive in Tiger using Tiger's Disk Utility. Also check ASP and see if the hard drive is recognized.

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • HI.I HAVE UPGRADED MY IPHONE5 TO 8.1.3. I M HAVING PROBLEMS FOR MAKING OR RECEIVING CALLS.PLZ HELP ME WAT TO DO.I HAVE DONE THE BASIC RESETTINGS,RESTORING N ALL THAT.CAN I DOWNGRADE TO THE LOWER VERSION?

    HI.I HAVE UPGRADED MY IPHONE5 TO 8.1.3. I M HAVING PROBLEMS FOR MAKING OR RECEIVING CALLS.PLZ HELP ME WAT TO DO.I HAVE DONE THE BASIC RESETTINGS,RESTORING N ALL THAT.CAN I DOWNGRADE TO THE LOWER VERSION?

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • Since the last upgrade two days ago, my scripting seems to be wonky on certain sites - Facebook, eBay, esp.

    There are a lot of sites that just won't load since the last upgrade. I have tried to re-install Flash from both Adobe and RealPlayer, but get told that :
    "Firefox doesn't know how to open this address, because one of the following protocols (apt) isn't associated with any program or is not allowed in this context."
    I can't download Flash, I can't reach major sites... what's happening? I have cleared my cache, it's not that. It's something weird that the last upgrade of FF has done.
    Please fix it quickly?? Thank you.

    Do Facebook, eBay, etc., give you a specific error message? That may lead to more specific suggestions.
    Adobe and Real should not be using apt:// URLs with Windows systems. That is very odd.
    Could you check your connection setting in the Options dialog:
    "3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
    The default setting of "Use system proxy settings" should piggyback on the IE/Windows "LAN" settings but you also could try "No proxy" to see whether that works any better.
    Are you able to download a full installer for Firefox? If so, try this Clean Reinstall procedure to bypass any confused/conflicting files in Firefox's program folder:
    (1) Download a full installer for Firefox 32 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
    (2) Exit out of Firefox (if applicable). Do not uninstall Firefox.
    (3) Rename the Mozilla Firefox program folder
    ''64-bit Windows:''
    C:\Program Files (x86)\Mozilla Firefox
    to
    C:\Program Files (x86)\OldFirefox
    ''32-bit Windows:''
    C:\Program Files\Mozilla Firefox
    to
    C:\Program Files\OldFirefox
    (4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
    Does Firefox behave more normally?
    Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
    * OldFirefox\Plugins
    * OldFirefox\browser\plugins

  • Having trouble with firefox since the last upgrade

    Since the last upgrade to firefox on the 17th jan it will open up an initial tab but wont open any subsequent tabs. if I click on a link or one of my favourites it just seems to sit there going round and round and not connecting. I have never had any sort of problem with firefox before and don't want to uninstall and reinstall in case I lose all of my favourites. Can any one help?

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I cannot get Apple to send verification email for Icloud after the last upgrade

    I cannot get ICloud to work after the last upgrade on iphoto?

    explain the crash... perhaps recovery might be more useful than new settings.
    what is wrong with these settings https://autoconfig.thunderbird.net/v1.1/mindspring.com

Maybe you are looking for