The Latest AMD Omega Driver - Applies to AMD 8670M

After Installing Driver and reboot,
PC will Crash BSOD At Startup
-ShutDown will sometimes Refuses

Hi @eddieleon7pc
I see that you are looking for you AMD graphics driver. I will be happy to help you with this. Here is the latest AMD High-Definition Graphics Driver for your model from the HP website. Give that a try and let me know how it goes. If you get a BSOD again please let me know the error message that you get with it.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

990fxa gd65+win8.1 are the latest AMD chipset drivers needed?

990fxa gd65+win8.1 are the latest AMD chipset drivers needed? any benefit?
http://support.amd.com/it-it/download/chipset?os=Windows+8.1+-+64
Thanks

it just depends if you have problems you have with your chipset!
if the answer is its working perfectly well and all the ports speeds are normal leave it alone and use your current ones!
if the answer is you are having issues with your USB ports or something else then update them!
(Newer drivers can sometimes induce problems with your system and it just depends if you have problems or not if its a good idea to update)

How do I update to the latest Catalyst ATI driver for my Radeon 6770M?

I have the Pavilion DV7 6059 eo with switchable graphics, bu I only care about the Radeon-card. The latest HP-driver is from 2011, and I want to use something later! - How? Auto-configurator does not do the work. When the system reboots it says that I have no driver installed at all! I have the windows 7 64 home premium...

Hello @fredbjor,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are looking to update your GPU to the latest drivers available, and I would be happy to provide you with my assistance!
To ensure your system is loaded with the latest driver software, I recommend following the steps in this document on Using HP Support Assistant (Windows 7). This should help update the Radeon GPU with the latest applicable software.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Is Anyone Having Trouble with the latest Liquid Mix driver and Logic 8?

I'm having a host of problems with my Liquid Mix and Logic (also Digital Performer too.. but that's another forum :0) ). I experience a great deal of latency and flanging when using two instances of it on a channel. How is it for everyone else?

First, contact Focusrite and make them aware of your LM/Logic problems. I'm communicating with a rep who said he wasn't aware of any issues with LM and Logic.
Next, I speculate the latest driver of the Version 2 software can't live up to it's claims of variable latency. When I follow the minimum latency of 1032 for the LM manager (as posted on their support site), LM and Logic behave well. The problem for me is I never use 512 in Logic.

PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

Problem:
I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
Thanx,
Oli4
Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

Mine crashed once with new update, but working fine.
I had to delete old printer, restart iMac, and then reinstall
new drivers to get it to work. Would not complete without
the restart after deleting non-working printer. No problems
since and all features working.

Is Boot Camp SS 5.1.5640 the latest driver?

Boot Camp Support Software 5.1.5640
Hi is this the latest driver? it seems to be published on Feb 11, 2014. I have an iMac 5K so it is way older than that. When I install Windows I also ticked download the latest boot camp driver, So I guess that is covered?. But when I went into the Bootcamp Manager it does not allow me to select display brightness setting.
Apple broadcom Built-in Bluetooth driver seems to be provided by Apple and dated 16/1/14, with driver version 5.1.0.0
I am only asking because my USB 3.0 powered external hard drive docks have been crashing during file transfer, I have Windows 8.1 Pro (updated to the latest that Windows Update can update).

The brightness can be adjusted using the Apple Wireless Keyboard.
I hope Apple updates the USB drivers, currently for the xHCI it is using a Microsoft driver from October, As I only have 256GB, all my drives are external using USB 3.0, because thunderbolt docks are way too expensive. I have been tinkering a bit, trying to figure out the disconnections for my drives, I hope I have fixed it, As I have disabled all the sleeping states for USB, Hard disk as well, see how it goes.
I have 2 external usb hard drive docks, and both of them failed to work reliably with disconnections. Trying to play steam games like Wolfenstien results in disconnections every 10 or so minutes.

Qosmio X300-14N - Is there a way to have the latest display driver?

Hello,
Since the begging this computer has been very sensitive with video drivers, the use of SLI technology implies the use of the last Nvidia driver but our computer has never been officially added to Nvidia laptop releases. More generally, with some video games, I have big performances issues (for example Starcraft II), very high temperatures and sometimes artefacts.
Is there a way to have the latest officials drivers (without having to modify by hand .INF file) and what about temperatures issue ?
Thanks.

Arzul-there is a way to use the latest Nvidia verde notebook driver without you having to modify the inf. yourself.
I posted the full method in the gaming forum under 'Toshiba display drivers and what they dont want you to know'-just follow that but use the latest Nvidia notebook driver and matching modified inf. from Laptopvideo2go instead of the driver i mentioned as i posted that sometime ago.
I have an x300-13w with the hybrid sli set up and i'm using the 258.96 driver with the pre-modified inf. from Laptopvideo2go with no issues-i have the nvidia SLI profile running for Starcraft 2 and its runs great!
However i did purchase a Zelmann laptop cooler to help during the summer and even though my GPU temp gets to 80-90c this is no hotter than when i was using Toshibas outdated driver-i do also regularly use compressed air can on the vents.All this has helped me to have good stable gaming on all the latest games.
I do share your frustration at the fact that our laptop is not included officially in nvidia drivers even though it has a Nvidia chipset not an Intel one-but its all to do with cold,hard business-Toshiba do not want to pay Nvidia to have our 'old' laptop supported in driver releases.
One thing that you should do if you update your display driver-also update to the latest BIOS from Toshiba-this corrected a bug which had prevented screen brightness control from working with gpus in SLI with recent drivers.
You will lose the laptops ability to auto switch to the motherboard gpu when on battery as well as this is a function only built into Toshiba display drivers-but you can do this manually yourself in needs be.
One disappointing thing i noticed with the release notes for the latest Nvidia driver-it states that 258.96 will be the LAST one to support hybrid SLI-i dont know if this means we wont be able to use later drivers even with modded inf.
Anyhow.. good luck and happy gaming!

R9 270X Gaming 2G, unable to use the latest drivers and Mantle

I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
Thanks

Please disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks

Latest Ati 6750M driver Macbook 2011

Hi, when I try to install the latest AMD mobility radeon 13.1 Drivers (from this http://support.amd.com/it/gpudownloa...b_win7-64.aspx
in my Windows 7 64bit partition (Macbook Pro early 2011 with Ati 6750M) I have an error with text "no graphic card supported" (or simil).
What drivers I need to install for play with Battle Field 3?
At this moment I have installed 12.8 beta 11 Desktop Edition, all works but if I overclock with MSI Afterburner my desktop flickering when the clocks automatic change (when I play the clocks are always at 750/900 and no monitor flickering). Maybe the problem is the NO mobility radeon installed.
Sorry for my english
Thanks!

Thanks, but I have installed 12.4 12.8 12.11 .... the drivers are correctly installed, but with the latest 12.11 or 12.10 the screen flickring every time the gpu change clocks (for low energy consumption for example).
Anyone have this issue with latest 12.11 or 12.10?
Which drivers are you use?

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Bug in latest 11g JDBC driver

We have found a problem when using the latest 11g JDBC driver ("11.1.0.7.0-Production") and connecting to a 10g database. If the includeSynonyms=true property is set when opening the connection, then calling DatabaseMetaData.getColumns() will not return any columns for views. Tables and synonyms work, but not views. Without the includeSynonyms property, columns are returned correctly for tables and views, but obviously not for synonyms.
The previous 11g driver ("11.1.0.6.0-Production+") did not have this problem.
Our testing was done using ojdbc5.jar with Java 1.5, and a 10.2.0.1.0 database. I have not tested if the same problem exists when connecting to a 11g database, or when using ojdbc6.jar/Java 1.6.
Is this a known issue? Is there a workaround other than reverting to the older driver?
Thanks.
Steve

Are you sure that DatabaseMetaData#getColumns is actually working? AFAIK, this is not implemented feature in Oracle JDBC driver.

Trouble installing latest Intel Display Driver for Windows 7

Anyone else experiencing issues trying to install the latest Intel Display Driver for Windows 7, version 8.15.10.2057, dated 2 Mar 2010?
This is the second updated driver release that refuses to install due the following error while running setup.exe: This computer does not meet the minimum requirements for installing the software.
I've verified compatibility and have disabled Switchable graphics and selected Integrated Graphics in the BIOS
System: T400, 2764-CTO running Windows 7 (64-bit)
Thanks...
T400 2764CTO
Windows 7 x64

bwpotter,
Appears you selected the right .inf file for Win7/64. Notwithstanding the error flags, are you sure the driver did not install?
For WinXP/32, the equivalent file name is kit22686.inf. In the case of WinXP (likely similar for Vista and Win7), Lenovo's file-set will unpack to C:\drivers\WIN\DISPLAY2. The .inf file that appears in the Device Manager install-routine lives one level down, in C:\drivers\WIN\DISPLAY2\Graphics. Only one .inf file resides in this directory.
When forcing installation of the driver under WinXP, error messages appear that are similar (but not necessarily identical) to those you encountered. Still, after a sequence of five or six such error messages, the driver does load and can be verified after a reboot. (The new driver has performed to spec for the past several days--no issues whatsoever.)
The final splash screen in the series reports "Completing the Hardware Update Wizard." (This message does not, however, necessarily denote a successful installation.)
In the case of WinXP, the errors appear to be generated by the installer, igxpun.exe (v1.2.30.0). Note that the flaky display driver installation should generate an error log. Search for an error log file using the string "*appcompat.txt" (no quotes) and see what it says.
In the end, the problems with this package can be attributed to simple sloppiness (vendors commonly forget to eat their dog food) and should be quickly fixed if the community barks loudly.
Hope this helps.
--BAM

Cannot install latest Catalyst Graphics Driver for w500 under Windows 7 RTM 64 bit

Hi,
I cannot install the latest ATI Catalyst driver (9-9_beta_win7_64_dd_CC)) for the ATI Mibility Radeon 9650 graphics card.
Felet uppstod i programmet med namn: InstallManagerApp.exe, version 3.0.741.0, tidsstämpel 0x4a84bcd2
, felet uppstod i modulen med namn: ntdll.dll, version 6.1.7600.16385, tidsstämpel 0x4a5be02b
Undantagskod: 0xc0000005
Felförskjutning: 0x000000000006f31e
Process-ID: 0x468
Programmets starttid: 0x01ca369873fa09f5
Sökväg till program: C:\Drivers\Graphics\ATI\99\Driver\Bin64\InstallManagerApp.exe
Sökväg till modul: C:\Windows\SYSTEM32\ntdll.dll
Rapport-ID: be82a3f1-a28b-11de-bfc2-0022680b4311
If i run the following command from an administrative command prompt (bin64): atisetup -install -output screen
The installation will seem to succeed according to the repot but Windows sticks to Standard VGA adapter and the annoying "ATI Mobility Radeon HD 3650 (Microsoft Corporation WDDM 1.1) " Driver.
Have anyone been able to install the Catalyst driver and get an external monitor to work?
regards
Michael

Hi @dazed1 ,
I see by your post that you need the drivers for Windows 7 Pro 64 bit. I would like to help.
I checked the website and there is a Full Feature and Basic driver available for Windows 7 64 bit. HP LaserJet 1022n Printer Drivers. Did you try both of these drivers?
I would try and install the preinstalled Windows drivers, if you are having issues using the downloaded drivers on the site with your Windows 7 Pro 64 bit. Run the Add a printer wizard from Devices and Printers.
You could also plug and play the drivers. Connect the printer to the computer and see if Windows will detect the printer and install the drivers automatically.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The Latest AMD Omega Driver - Applies to AMD 8670M

Similar Messages

Maybe you are looking for