The latest firmware is on the server. Install the firmware update from (Device Settings) in (Setup)
I'm getting this message on my printer (MG7120), but have no idea what it means.
Hi shirlcl and JCHa,
Updating the firmware of the printer should remove the message from your printer. To perform the firmware update, please follow these steps:
IMPORTANT
DO NOT power off the printer during the update.
(1) Power on the printer.
(2) Confirm that the printer is connected to the Internet.
(3)Tap [ Setup ].
(4)Tap [ Device settings ].
(5)Tap [ Firmware update ].
(6)Tap [ Install update ].
(7) The message will be displayed, asking you if you wish to update the firmware. Tap [ Yes ].
(8)Tap [ Start update ]. The update will start.
(9)When "Update succeeded" is displayed, tap [ OK ].
Update of the firmware is completed.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
How do I reinstall an older version of the software on my IPod touch? Installed the latest update and now it no longer works in my car.
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
I've recently installed IOS 7.0.3. on my Ipad4. With the latest automatic upgrade of First Class yesterday the textfields for loggning in disappears upworth. How can I correct this.
HALF-SOLUTION!!!! (Restoring only, basically.)
Restore the phone via iCloud.com
1. Go to iCloud.com , and log in.
2. If you want a back up, make sure you back it up to itunes now!
3. Now back to iCloud.com - select the device you want. Press "Erase iPhone" (or iPad, iPod whatever).
You will go through a few steps. Skip the phone number and leave a message, as it isn't lost. Your phone will be restored. No need for plugging in!
4. IMPORTANT: Just set it up as usual. Language, country blah. But then you'll get to a step where it says something like "This iPhone was erased with iCloud. Log in with the Apple ID you used to erase it". In this case, my Dad's. So please do that. Later on, the phone will ask for an Apple ID to be used for the phone. I put my own one as I didn't want my dads!!!! Lol....
5. Plug into iTunes and back-up.
As for updating, I'm still on 7.0.2,,, it ain't working on my phone or itunes!! :( -
In eBay, I was trying to upload pictures when I got this message: "You need the latest version of Adobe Flash Player to use the standard picture uploader.
Download and install the latest version from Adobe before continuing."
In YouTube, when trying to watch a video, I got this message: "You need to upgrade your Adobe Flash Player to watch this video."
I have gone through the procedure for downloading and installing the latest version of Adobe Flash Player, but still get the same messages when I reopen Firefox and revisit these sites.
There does not seem to be the same problem with Safari, which runs the latest version of Adobe Flash Player with no trouble.
I am using an iMac running Mac OS X Version 10.6.7.You can find the latest Flash player for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
For Firefox on 64 bit Windows, you need the 32 bit Flash version version because Firefox is a 32 bit application.
*http://www.adobe.com/software/flash/about/ -
When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator. Help!!
Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having. https://discussions.apple.com/message/17374864#17374864
-
Got error message :"This this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version" This is on a new macbook. I already have the latest version installed and 64 bit. Help.
Did you do what the message said?
Also try using the Win 7/Vista link in the following:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Tonight opening Numbers caused a 'free update available box' advising me to install the latest version of OS X and then download the latest version of numbers. 'OK' is the only choice.
I can't force quit Numbers or even shutdown the iMac.
I don't want to lose the spreadsheet (90% completed so far) or upgrade to Yosemite.
I have OS X 10.9.5 running on a 2014 iMac.
What to do?
Thanks.NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
Trying to download and install the latest version of itunes but at install i get"older version of Bonjour connot be removed" then asks me to contact tech support and download is stopped.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time? -
I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.
trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type. -
what is the latest operating system that I can install on my mac mini 1,1? it has an intel core duo and 2gb memory. Current osx is 10.4.11.
Mac OS X 10.6.8.
(63055) -
How am i supposed to download the latest itunes version if i dont know the password because its not the same as my apple id password
The password being requested is, as for any Mac OS X software update or application installation, the password to your user account in Mac OS X, or the user name and password to an account in Mac OS X that has administrator privileges if your account does not.
Regards. -
I have followed the directions and my iphone is not installing the iOS 7.0.2. I have the most recent version of itunes on my laptop commuter. my iphone is attached to my laptop via usb port. The laptop uses dsl not wifi. Is that my problem?
Exactly what version of iTunes are you running? And DON'T say 'the latest version'... CHECK the version number. You need to be running 11.1 or higher.
-
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.
Maybe you are looking for
-
How to call an external application from the current one
Hi Guys, Im not sure if/how this is possible. For example: I have two projects : Project1 and Project 2. When I click on a button in Project2, Project1 needs to be launced. That is, the Main class of Project1 needs to be triggered. How do I do this?
-
HP IPrint Photo 3.0 will not work on Iphone4
I loaded the HP IPrint Photo 3.0 app to both my Iphone4 (OS 4.0 & 4.1) and my wife's Samsung Galaxy S Captivate (Android OS). I tried to print different photos from each phone wirelessly to my HP Photosmart Premium Fax AIO C309a printer. The Galaxy
-
Prevent creation of PO and not PR
Hi, Requirement is to prevent PO creation for a material type for a particular status and not Purchase requisition. By making Purchasing message u201CBu201D for a particular material status, it gives error message while creation of PO and purchase re
-
Media Encoder 2014 ohne FLV Support
Hallo Forum, als CC 2014 rausgekommen ist, war ich schon ziemlich überrascht das der ME CC 2014 kein .flv mehr Unterstützt. Durch komplizierte De- und Installationen konnte ich dann den ME CC 2014 löschen und den ME CC wieder holen. Nach dem aktuell
-
Sender Mail adapter: Null Pointer Exception
Hi , Sender mail communication channel using mail package & POP3 protocol is showing the Error: exception caught during processing mail message; java.lang.NullPointerException. Initially it works fine but now it is showing this error. I could not g