The Latest Premiere and Encoder update enlarged everything

Hi everyone,
I just updated my Premiere Pro (8.2.0.65)and Encoder CC (8.2.0.54),
and for some reason the display both softwares got bigger.
It begins with the opening screen of the software (attached) which is unproportionally big.
More than that, all of the fonts and in-software display in bigger and extremely inconvenient.
I have looked after this problem and did not find any references of this problem.
Anyone?

Every time I've try to export from Premiere Media Encoder gives me this error message that says: Installation error - please ensure this product have been installed properly.
I can't find a way to only reinstall media encoder from CC
It was working fine before the last Premeire update.

Similar Messages

How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

I have the trial version of the latest premiere and the audio works in that but not cs6

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-especially your sound hardware, and the details of your video

I installed the latest Security and Safari update. Now Safari crashes and Chrome won't launch at all. Can I revert to the software state before the newest updates?

After installing the latest security and Safari updates (18 Sept 2013), Safari crashes and Chrome won't launch at all. Can I revert to a software state before this latest install?

The problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 3.2.1. and/or Safari 4.
In your case these are:
x7e3000 - 0x7e3fff com.aladdinsys.mmenabler 7.1.0 (99) /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler
0x7e7000 - 0x7e7fff com.yazsoft.SDEnhancer ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/MacOS/SpeedDownloadEnhancer
0x254a000 - 0x254dfff com.yazsoft.SDSafariBundle ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/Resources/SDSafariBundle.bundle/ Contents/MacOS/SDSafariBundle
You fill find them in one or either of these folders:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
Close Safari and delete them, then restart Safari and it should be working normally.
Check with the developers of the plug-ins in question for updates that are Safari 4 compliant.

Encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

What specific OS and Encore versions? Since you say "latest OS updates," I assume Mavericks, and is this the relatively new 10.9.1 version?
Where in the startup does it crash? Is there an error message?
Mavericks causes a variety of issues, and we don't have enough data to really pin them down. At least with the original Mavericks, some users appeared to get CS6 to run with some serious but workable problems.
Make sure you have handled any permissions issues.
This describes such issues:
Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
http://kb2.adobe.com/cps/824/cpsid_82414.html

Why does my retina MBPro and the projector go blank, when connecting with HDMI? This worked fine until the latest OS and firmware update.

Connecting through HDMI worked fine, until the recent firmware update and the 10.7.5 OS update. Now, both retina display and projector dosplay go blank, with the screen coming back when unplugged from the projector.

Clone your system.
Never apply updates w/o one.
And yes there is a page with all the Apple Downloads to do manually and then you can keep it on hand. Same for the OS X Lion or ML installer - save them before running. Still on 10.6.8 so you have OS X 10.6 DVD.
Combo updates do not do any harm. There could be issues to the drive directory beforehand.
Mac Pro has been shipping with Lion since summer 2011, though you can even now still reinstall iwth 10.6.4+

Whenever I use firefox...it can oad a page, but when I click anywhere on a page...the page won't answer. I have installled the latest version and all updates but nothing helps.

see above

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Downloaded latest Itunes and Windows Update and everything fell apart

Okay, I dl'd the latest Itunes and Windows Update today and turned off my computer. When I came back and turned it on, it became really slow and the style for all the "windows headings" turned "gray classic theme." I tried running Itunes and a box comes up saying that I "Do not have access to change the Catalyst Control," my ATI driver I think (x1300). Then it says that I can't run Itunes because the audio is configured wrong. I go to my Audio settings in the "control panel" and everything is grayed out except the hardware choices. I clicked on their properties (SigmaTel Audio), but nothing would come up for 45 minutes. I am barely running in VGA mode and cannot access the internet connections in IE, thus barring me from Microsoft's updates. Sorry if it's hard to understand, but I'm ****** because I can't listen to all the new stuff I bought on Itunes yesterday Does anyone have any clues or ideas?

Take a look at this link, http://support.apple.com/kb/TS1369

Latest Premiere and Media encoder CC update shuts down

Latest Premiere and Media encoder CC update shuts down when you load saved file or try to export to media encoder.
I tried restarting after update, next is to revert to previous version.

Every time I've try to export from Premiere Media Encoder gives me this error message that says: Installation error - please ensure this product have been installed properly.
I can't find a way to only reinstall media encoder from CC
It was working fine before the last Premeire update.

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

Adobe After Effects, Premiere and Encoder does not use the GPU (CUDA) ?

Please! Explain me. Why? Adobe After Effects, Premiere and Encoder does not use GPU (CUDA) ?
Everytime i have GPU Load from 0 to 10% !!! (GeForce GTX 970) And also my CPU load is not full. Any suggestions?

seg.48162731 wrote:
At the moment i use AE, AP and ME CC 2014 8.2 with the latest updates. I have GTX 970 and AMD 8350. What's my problem?
Which chipset is on your system's motherboard? Which motherboard is your PC equipped with?
If the motherboard is using an AMD 790 or 970 series chipset, the HyperTransport bus will be running at a reduced speed, and thus the CPU performance will be worse than a quad-core Intel i5 CPU without hyperthreading. In many instances, this means that the GPU will be laying idle, waiting for the CPU to catch up.
If on the other hand the motherboard uses an AMD 990FX chipset, then it's likely that there is something else bottlenecking your PC.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...

I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

Solving MSVCR80 issue and Windows iTunes install issues.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs. Says it can find it and then leasds me to locate it. I don't know where to look. Help!!!

I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!

Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari

HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

The Latest Premiere and Encoder update enlarged everything

Similar Messages

Maybe you are looking for