The latest version of iTunes is defective and crashes making bug troubles
The latest version of iTunes for Windows is crashing and deleting anything, including purchased or syncronized form iPod music stored in it every time the PC is turned off.
I was unaware of this problem, and continued to authorize the new iTunes on new PC at any request. Now I have still one PC with one iTunes on it, but all authorizations are finished, becouse the iTunes believes that all five more PC's were authorized.
Also I changed to new PC, and downloaded new iTunes on it. This way my iPod does not recongises the new iTunes on new PC in order to link and sync.
All the songs bought on iPod cannot be sync and transfered to the iTunes, and vice versa, all songs bought or stored from CD on iTunes cannot be synchronised with the iPod.
If you have a Windows computer: http://support.apple.com/kb/TS1538
If you have a Mac: http://support.apple.com/kb/TS1591
Similar Messages
-
I recently updated my iPhone to IOS 8 and it said I need the latest version of iTunes to sync and back up however my computer won't allow it what do I do !?? Anything helps!!!
If it's in recovery mode, the data is already gone. Why did you never back up your important data?
-
I just downloaded the latest version of iTunes for Windows and now iTunes crashes everytime I launch it. I have tried re-downloading and selecting Repair with no luck. Any suggestions?
thanksFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?
Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me) -
I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?
First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz -
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Please help
Hi Rob,
Thanks for visiting Apple Support Communities.
The steps in this article can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best Regards,
Jeremy -
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
I just downloaded the latest version of iTunes and now my computer does not recognize my ipod nano. How do I fix this?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?
Hi Pittgo76,
If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
- Brenden -
Also, the "burn playlist to disc" command has disappeared from the File options. I downloaded the latest version of iTunes but that only restored tracks I'd bought from the iTunes store. I also tried setting up another logon.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2 -
So I have a Mac iBook and it says I'm on the latest version of iTunes but when I plug in my iPhone it says that I need a newer version And I want to move music onto my phone, what do I do?
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?
Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens. -
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792)
Maybe you are looking for
-
Can Captivate 4 project files be opened in Captivate 5?
I was wondering if captivate 4 project files can be opened in captivate 5? I know captivate 2 project files cannot. Thanks guys, Kya.
-
How do I stop ITunes from opening up every-time I start the computer
Everytime I start my computer, Itunes opens up. I tries going into startup items, but it is not listed there. How do I get it to stop opening on Boot Up? Thanks in advance I have a Power Mac G5
-
Can we restart fms server from flex?
Hi, I wanted to know whether we can start,stop restart fms server using flex code(actionscript).I actually came across API's StartServer() and StopServer().Can I use this for the purpose.If yes can you please give a sample code so that I can better u
-
Missing "render lighting effects" in cs5.1
I've googled this to death and can only find the answers referenced here: http://forums.adobe.com/thread/642137 I don't have that option though...mine only says "share folders" where this one has the option of running in 32 bit mode... Any ideas?
-
Why suddenly would my iMac start revving its drive/fan (?), slowing, then revving, etc.? Sometimes it seems that shutting down, then restarting, helps, but it also happens after I have just booted it up. This just started happening a couple of weeks