The left side of the iPhone 5S screen is bumping a little bit

few days ago, i noticed that the left side of my iphone 5s screen seems to not be fixed well. if you take a look at it, you can notice a liitle bump (less than 1mm) in the edge of the edge of the screen. when i push the screen softly with my finger, it goes down and the bump diappears and when i release it, the bump appears. it semms like the edge of the screen is moving up and down in the left side. none of that is observed in the right side of the screen. what is the problem? how can be fixed?

How long ago was the iPhone exposed to rain? How long did you attempt to dry it? How did you attempt to dry it? Did you power the device off before allowing it to dry?
More than likely, given the behavior that you are describing, the device is damaged and will need to be replaced. Make an appointment at the Genius Bar of the nearest Apple Store for an out of warranty replacement.

Similar Messages

  • The top button on my iphone 5 stopped working recently.. Well it works but barely at all if every. Most of the time it only locks the screen if I click on the left side of the button. Also my Camera causes a blue pixelated spot on pictures I take.

    The top button on my phone recently stopped working. Well sometimes. Majority of the time if I click it hard enough on the left side of the button it will lock the screen... Otherwise it doesnt work at all anymore. Also the camera appears to be placing a blue pixel on pictures I take. Its annoying. What should I do?

    It's completely situational. Without being able to directly compare the "scratch" on the original poster's iPhone with your iPhone, what gaamcc had happen could not be extrapolated to guess what Apple may do in your situation. It will depend entirely on what the Apple technician diagnoses after examining your iPhone. He/she may decide that any damage is strictly cosmetic and didn't have any connection with the problem you're taking your iPhone in for, or he/she may diagnose the problem as stemming from user damage. You'll just have to see when you go to the Apple Store.
    Regards.

  • My iPhone 3GS has dead spots on the left side of the screen, does anyone know how this problem has started or how I can fix this?

    Over the past couple of months, my iPhone 3GS has had dead spots on the left side of the screen, preventing me from using the r, d and x keys, the number 4 and the semi colon and comma keys. Does anybody have any ideas on why this has happened or any ideas that I'll be able to fix this problem?
    Just a note; I can't put my phone to sleep or turn off as my lock button isn't working, so I'm using the AssistiveTouch settings.
    Thanks.

    hannahhfoskett wrote:
     I would gladly upgrade to the next model if my contract was due!
    This has no impact on the ability to purchase a new iPhone... it simply means that the newer one will not be at a fully subsidized price.
    You could always take it to Apple and do an Out of Warranty exchange (I'm assuming the device is out of warranty) for $149 US.

  • HT1937 I have a stain on the left side of the screen light brown suddenly appeared

    I have a stain on the left side of the screen light brown suddenly appeared

    Hello Amirbar,
    For more information on this, take a look at this article:
    How to clean Apple products
    http://support.apple.com/kb/HT3226?viewlocale=da_DK
    If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Have a nice day,
    Mario

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

    So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

    Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.

  • My scrollbar unexpectedly has moved to the left side of the screen (only in Firefox), and I don't know how to move it back

    my scrollbar has unexpected moved to the left side of the screen in stead of the right side, and I don't know how to move it back. This only occurs in Firefox.

    Set the pref layout.scrollbar.side to ''2'' to place the scroll bar at the right side.
    See:
    * http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • When I render my video I get a black bar on the left side of the screen

    I just upgraded to FCS 2 and so far it's been a complete waste of money. I'm having nothing but problems with FCP, Compressor, and QMaster. I will just post my FCP problem here.
    I've edited a weekly video podcast and everything looks great, until I render it and export it. When I render it, I get a constant, solid black bar on the far left of the video that takes up about 5% of the screen. My layers are definitely sized correctly to fill up the entire canvas, and they are all centered. I cannot figure out why I am getting this black bar or how to get rid of it without ditching the upgrade and going back to FCP5.1.
    I have already tried completely uninstalling the FCS suite and reinstalling. No luck. Any help would be GREATLY appreciated.

    Thanks for the reply.
    My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
    My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
    The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
    I am exporting with Quicktime Conversion to:
    MP4
    h.264 codec
    720x405
    1000 video bit rate
    Main Profile
    No cropping/filters or anything.
    The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
    I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
    Thoughts?

  • On FaceTime contact are on the left side of the screen...they use to be on the right side much better how do I change this listing to the right side?

    FFace time contact listing are on the left side of the screen they use to be on the right side...why the change and how can I change the listings to the right side?

    There doesn't seem to be a setting for that. As to why Apple made the change, only they would know.
    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • My macbook keeps freezing with the left side of the screen on the right and the right side of the screen on the left. Help

    My 17-inch early 2011 macbook pro keeps freezing on me.  The freeze usually occurs when I'm importing or exporting pictures, when I stream anything, or If I am watching a dvd.  The left side of the screen shifts to the right and the right side of the screen shifts to the left.  lines also appear on my screen and I can not force quit any open application.  I have not dropped my laptop at all. 
    Mac OSX Lion version 10.7.5
    2.2 Ghz Intel Core i7
    I would like to avoid going to the an apple store to fix this problem if possible.  The closest one to me is 40 miles away. 
    Help : )

    If you don't have the Applecare extended warranty then you will need to pay for the fix. The fix is a New Logic Board. It seems as your Graphics card is failing in some way. No there is no software fix for this.
    The Graphic chip is soldered to the logic board and the only way to change/fix it is to replace the complete logic board.
    Good Luck and Best Wishes

  • Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

    I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen.  I believe I must have hit a button that moved the picture to the far right.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • Firefox Doesn't Load Any Website and Scroll Bar Switches to the Left Side of the Screen??

    First let me say this is a work computer that I am using, so there is plenty of virus protection and firewall. I have always used firefox for all my casual internet browsing and work network needs. I recently updated to the latest version of firefox and that is when I started having problems. Almost any web page I go to wether it is my work intranet home page or a common site such as google mozilla will not finish loading the page. If I hit refresh or try to go to another site it gets wierd and the scroll bar switches to the left side of the screen and the page seems to be stuck loading. At this point almost nothing responds to any mouse clicks except for closing the firefox window. If I go to tools --> options it brings up a blank options window with only the "ok" and "cancel" buttons displayed. Help please, I don't like using IE, but right now that is my only option.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1; Tablet PC 1.7; .NET CLR 1.0.3705; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    There are several reasons why the site may look wrong:
    * ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
    * ''Bad cookie from the broken site'': Clear cookies from the broken site by following the steps at [[Deleting cookies]].
    * Images are blocked/disabled: see [[Images or animations do not show]]
    * Plug-ins are outdated: check for outdated plugins on the [http://www.mozilla.com/en-US/plugincheck/ plugin check page].
    * Firewall software is blocking some resources on the page: see [[Firewalls]]
    * An extension may be causing the problem: see [[Troubleshooting extensions and themes]]
    For other steps to try, see [[Web sites look wrong]]

  • How do you get the bookmarks list permanently displayed on the left side of the screen?

    I somehow managed to get the bookmarks permanently open and displayed in a vertical column on the left side of the screen. I accidentally closed it and cannot get it to display again. How do you manage to get the bookmark list permanently open and displayed again? Thank you.

    Hello exoticdoc2, see if the next [https://addons.mozilla.org/en-us/firefox/addon/all-in-one-sidebar/ All-in-One Sidebar add-on] it is useful for you, it is more than a sidebar bookmarks toolbar.
    thank you

  • When I use Safari on my iPad 1/4 of the left side of the screen is grey. It seeme devoted to "shared links", "reading list", or "History". I would like to get rid of that. How can I do it?

    When I use Safari on my iPad 2, more than 1/4 of the left side of the screen is used for "shared links", "reading list", or "History". I would like to hide that. How do I do that?

    Tap the Book icon seen left of the address box.
    Best.

Maybe you are looking for

  • How can I REALLY downgrade my iCloud storage?  HELP!

    How can I REALLY downgrade my iCloud storage?  Apple is trying to scam ppl out of $$. They will NOT allow you to downgrade per their instructions.  It ALWAYS says the iCloud manager is not available, try later.  Here is what my email says: This is a

  • How can I burn photos from Iphoto to dvd?

    I have photos in iphoto I want to burn to a dvd, have tried doing this 4 times and dvd comes out as though finished but I am unable to play it on a pc? I need to give a copy to my daughter who only has a pc not a mac is this possible, surely? Barb

  • Pls sugg.modification of an orded prod is sevice or std purchase

    hi dear frds, we have raised one po against the butterfly valve manufacturer(vendor).according to PO they have manaufactured and made it ready.but before delivery of valves,we have noticed that some modifications to be done in this design of valves.s

  • RFBIBL00 - missing data to FB05 clearing

    Hi guys, the acctg document i created via RFBIBL00 only populates the Purch. Doc. field of the 1st line item. the requirement is that the PUrch Doc should be populated on all line items. how to do that? below is my code:     x_bbseg-stype = 2.     x_

  • Can't start x, parsing error

    I execute the startx (or xinit) command as non-root user but something's wrong. Here's /var/log/Xorg.0.log and /etc/X11/xorg.conf Parse error on line 7 of section InputDevice in file /etc/X11/xorg.conf This section must have an Identifier line. (EE)