The length received from the server does not match the expected length
Every time I attempt to transfer a tv show or movie from my mac mini library to my work laptop library, I receive the above error - any ideas?
I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/
Similar Messages
-
Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================Hi Glen,
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen -
Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support -
Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
KrisHi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
Thanks in advance for any help.
Exchange server 2008
Outlook 2010Hi,
Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
In the midst of Exchange 2013/2007 coexistence configuration.
Currently:
Exchange 2007:
2 CAS\HUB
1 Mailbox server
Exchange 2013 (2 sites):
LA:
1 CAS
2 MBX servers
MKE:
1 CAS
2 MBX servers.
We purchased a certificate from Digicert and added every SAN name we could think of including "legacy.companyname.com", just to be sure. Added certificate to Exchange 2013 CAS servers and 2007 CAS\HUB boxes. Configured virtual directories on Exchange
2013 MKE-CAS01 but not on Exchange 2013 LA-CAS01. Configured virtual directories to on Exchange 2007 CAS\HUB to point to "legacy.companyname.com".
Mailboxes have not been moved yet. I just wanted to get the coexistence between Exchange 2013/2007 up first but some users (not all) receiving
"The name of the security certificate is invalid or does not match the name of the site" for
"LEGACY.COMPANYNAME.COM". I remember configuring the AUTODISCOVER virtual directory for Exchange 2007. Any ideas? Thank you.Hi,
Please make sure that the certificate with "legacy.companyname.com" name is enabled for IIS service. We can check it by running the following command in Exchange server 2007:
Get-ExchangeCertificate | FL
Thanks,
Winnie Liang
TechNet Community Support -
I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of. I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
clients get prompted for a security warning. I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine. My Outlook 2013 client doesn't prompt me with the message but I have other users who are
still getting the "The name of the security certificate is invalid or does not match the name of the site" error. The domain on the cert error show up as server.mydomain.local. I've gone through all the virtual directories and pointed
all of my internal and external URL's to https://mail.mydomain.com. This made one of the two warnings go away but not the second. I've dug around on google and gone through everything I could find here and as far as I can tell my internal
and external url's are configured properly and I can't figure out where this error is originating from. Any ideas on where I should look outside of the virtual directories?
I'm including a good link I found that contains all of the virtual directories I updated. I've checked them through both CLI and GUI and everything looks good.
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/Hi,
When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
Regards,
Winnie Liang
TechNet Community Support -
The name of the security certificate is invalid or does not match the name of the site error?
I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TDHi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
"ExcludeHttpsAutodiscoverDomain"
"ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon -
Scenario - Two Domains in different forests in production
Domain ABC.com - Contains Exchange Server 2010 + Windows 2008 R2 AD Domain controllers
Domain XYZ.com - Windows 2008 R2 Domain controllers + Contains all users + Desktop compuer accounts.
User logs in to the domain XYZ.com from a desktop and he configures outlook using the user ID in domain ABC.com.
When he opens Outlook it is getting connected and he gets an error message pop -up saying 'The name on the security
certificate is invalid or does not match the name of the site'
I am using an external certificate from Thawte for autodiscover.ABC.com & webmail.ABC.com
I read about one solution provided in MS KB article - http://support.microsoft.com/kb/2772058
But in my scenarion there are two domain involved. Pls guide how to clear this.
Hi,
How about logon [email protected] on ABC domain via OWA?
If OWA works well, it seems and issue on the Autodiscover side.
Please run "Test E-mail AutoConfiguration" on Outlook to check whether this issue caused by Certificate Mismatch.
1.
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
2.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”.
3.
In this scenario, you need to check the host name for the following services:
Autodiscover, EWS, OAB, ECP, UM
4.
If any of the urls above does not match the one in the certificate, refer to the following article to change it via EMS:
http://support.microsoft.com/kb/940726
More details to see following FAQ on "Checklist for Exchange Certificate issues":
http://social.technet.microsoft.com/Forums/en-US/fa78799b-5c55-4c71-973b-0e186612ff6f/checklist-for-exchange-certificate-issues?forum=exchangesvrgeneral
Thanks
Mavis Huang
TechNet Community Support -
The located assembly's manifest definition does not match the assembly refe
Hi,
I am getting following error when i run my application.
Error - Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.21, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
When i copied Oracle.DataAccess.dll from the application server to my machine at that time also version complixct error is comming. Application server in 64 bit and my machine in 32 bit.
Please help on this issue.Hey Thrik - I would like to know that whether you have resoved / identified the problem or not.
I feel that root cause of this problem might be ODAC for .net
Until I installed ODAC, it was working fine but after this, suddenly I am getting the below message in yellow screen.
Pl. let me know if you also encounter after installing ODAC or ODP.
Today, I also got the similar kind of error. (Below is the snippet of the page).
Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
[FileLoadException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
System.Reflection.Assembly.Load(String assemblyString) +25
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
[ConfigurationErrorsException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +3479081
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +46
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3446661
System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
[HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +456
[HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426887
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 -
Hi,
I know this question has been asked a ton of times, but I haven't found any instance of this question asked for exchange 2013. Yes, I've seen Exchange 2010, Exchange 2007, but not Exchange 2013. The symptoms are all similar. Here is a description:
1 Exchange 2013 server, all roles installed.
External domain name: associates.com
Internal AD domain name: associates.local
Client installed a third party SSL certificate, but did not purchase a SAN or UC certificate, so there is one namespace on the SSL cert, and that represents the external OWA name: mail.associates.com
Now, when internal OUtlook 2010 clients start, they get the "The name of the security certificate is invalid or does not match the name of the site."
I'm just wondering if http://support.microsoft.com/kb/940726 still applies to Exchange 2013 to fix this issue. Does this article apply to Exchange 2013? If so, I will follow the above
article. If not, please direct me to any articles for Exchange 2013 that addresses this.
the autodiscoverserviceuri points to:
https://netbiosnameofmailserver.associates.local/Autodiscover/Autodiscover.xml
Thanks!
AYes, the http://support.microsoft.com/kb/940726 still applies to Exchange2013.
As per my understanding on this post;
- Poster's Exchange2013 has no SAN certificate.. (usually used for local address like; NETBIOS.Domain.lan). Be reminded that SSL providers will no longer accepts .LAN or .LOCAL in very near future.
- By default it uses local url for EWS, Autodiscover, etc.. (if you don't have SAN certificate installed in your CAS server, you would see the certi warning)
Anyway, I just want to share my case after applying the said work around long time ago (maybe some of you might encounter it as well): my Outlook still showed the certificate warning (I was just keep clicking the YES button).. I was wondering
that time what was wrong with my virtual directory settings.. until I decided to click "NO" for an answer to that certificate warning message, then voila! it didn't bug me anymore. Oh by the way, the certificate warning usually give you a hint
what triggers it like; "autodiscover.Domain.lan" on the first line of message, but in my case it just "NETBIOS.Domain.lan" (didn't make any sense, did it?).. Well, unfortunately I didn't have the chance to figure out what triggered that event.. -
The located assembly's manifest definition does not match the assembly reference
Hi All,
I install Microsoft patch Patch KB2972207 which supports only Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 R2 x86 update on my WS 2003.
I am using Web Application which is having .Net framework 2 SP1.
Am I able to apply above Microsoft patch to that Web Application?
After successfully installation of patch when I run browser for that Web Application I am getting Error stated :"The located assembly's manifest definition does not match the assembly reference"
If i remove above patch and reboot my system...No such error occurs.
Please let me know where is problem in high emergency!
Thanks in advance!Check if these URL's help :
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
http://stackoverflow.com/questions/215026/the-located-assemblys-manifest-definition-does-not-match-the-assembly-reference
http://stackoverflow.com/questions/19811009/the-located-assemblys-manifest-definition-does-not-match-the-assembly-reference
http://articles.runtings.co.uk/2010/04/solved-located-assemblys-manifest.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
The name on the security certificate is invalid or does not match the name of the site exchange 2010
We did an update to SP1 to SP3 for Exchange 2010 over the weekend and now I am seeing the following errors.
"The name on the security certificate is invalid or does not match the name of the site"
Any ideas why an update would effect this. I have looked at the names and everything seems to match up.Hi,
Does the issue happen to all users? If it is, please run the following command to check your certificate configuration:
Get-ExchangeCertificate | fl
Generally, the certificate mismatch issue is caused by the name in URLs doesn't match the certificate names with IIS service. Please make sure all URLs that used to connect Exchange from internal and external should match the certificate names with proper
services.
http://support.microsoft.com/kb/940726
Best Regards,
Winnie Liang
TechNet Community Support -
Hey guys,
We have setup autodiscover redirection properly (I guessed) by:
Creating a CNAME from
AliasName: autodiscover.tenant-domain.com TO
PrimaryName: autodiscoverredirection.hostname.com.
Then doing a re-direction to https autodiscover service.
All seems to be working properly, however, when I open Outlook, it still shows the pop out saying "autodiscover.tenant-domain.com - The name of the security certificate is invalid or does not match the name of the site".
The autodiscover redirection is indeed working properly, that's why the autodiscover is working, however it is still trying to match autodiscover.tenant-domain.com to the certitifcate instead of matching the re-directed url, which is autodiscover.hostname.com.
Could anyone advise what is wrong? Or anyone who knows how to correct it can contact me? :)
Jackson Yap APC Hosting http://www.apc.sg/Hi Jason, Well, if it is doing that, it is most likely beccause your autodiscoverredirection.hostname.com also respond to port 443/SSL. So, what you need to do is to make sure that specific IP isn't responding to 443. The reason is this, 1. You first hit
https://autodiscover.tenant-domain.com, which this is a CNAME to autodiscoverredirection.hostname.com. So, if autodiscoverredirection.hostname.com respond to 443, it will then give you an error. If it doesn, it will then move on to perform redirection right
away and you will not get that prompt.Regards, Kip Ng - http://blogs.technet.com/b/provtest/ -
The name on the security certificate is invalid or does not match the name of the site
Hi Guys,
Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
Text of error: “The name on the security certificate is invalid or does not match the name of the site”
We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
Thanks,
SergeyHi,
Please check SAP note:
1810486 - Dashboard Certificate Sercurity Alert appears on every
logon to Business One
Thanks & Regards,
Nagarajan -
The name on the security certificate is invalid or does not match the name of the site" : IE
Hi All,
All clients are getting “the name on the security certificate is invalid or does not match the name of the
site” when its reboot and try to access website.
I don’t have idea about certificate authority. Can anyone help on how I start troubleshooting this.
Is there any group policy setting which resolve this issue.
Please suggest what parameter I have to check.> All clients are getting “the name on the security certificate is invalid
> or does not match the name of the site” when its reboot and try to access website.
"View Certificate" should tell you.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:
Maybe you are looking for
-
Hello We purchased material in Depot with RG23D updated. Now we want to send the material back to Vendor. What is the process to be used in Depot? Thanks
-
Component Extension for EHSM 3.0: Authorization Error
Hi, I have installed Component Extension for EHSM 3.0 and its business package in EP 7.3. Some of the links like report incident are throwing authorization error: The user has all the roles assigned to him in the backend. Can you please help me fix t
-
My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new
-
HT1338 Combining two accounts on the same macbook
Hi, I created a second artificial account on my Macbook pro to protect my personal password on which my work loaded some additional programmes. However, I don't seem to have these programmes now on my own account. How can I combine the two accounts s
-
How to use the scan software on a PC with the MF8050?