The Letterbox FX doesn't work as god as before

Did anybody know why they change the parameters of some FXs like the Letterbox? I used this fx in a project I worked on. After update FCPX the parameter for push the picture down doesn't exists anymore so my project actually is damaged. What can I do? Maybe other projects got the same problem but I didn't checked, yet.

I assume when you say push the picture down you mean to be able to move the clip vertically within the letterbox top and bottom black bars. If you have Motion, you can right click the letterbox effect in the effects browser and choose to open a copy in Motion. Then in Motion select the effect source layer and then in the inspector select the filter tab. Then click on the arrow at the right side of the offset slider and choose publish. Save your changes and close Motion. This will give you access to the slider in the Letterbox copy in FCP and you can vertically move the clip within the black bars. Don't know why they took this out. Don't think there is any other way to get it back.

Similar Messages

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

Also it was not and never has been jailbroken if that helps.

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

I cant open apps on my iPhone 4 the touch screen doesn't work. I have restored my phone and still nothing works.

I can't open apps on my iPhone. The touch screen doesn't work. I have restored it already but it still won't work. What can I do.

If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

I have different account ID's with my iphone and computer.
I would like to standardize both to just the one.
One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
Is there an easy to fix this please, Fabfitz

If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address. This explains how: Change your Apple ID - Apple Support.
If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address. This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

Return the User to the Calling Page - doesn't work

Hello All,
I set up the "Issue tracker" tutorial to get in tuch with the apex (htmldb vers. 2.0)
All is working well but: Return the User to the Calling Page -> doesn't work. I performed all steps as descriped in the tutorial (iclusive the '.' on the &P7_PREV_PAGE ;-) ).
I use my own aplication at home and followed all the instruction steps few times but it does not work. Can you help me please?
Do I have to install something more?
In the Branch section: * 1: Go To Page &P7_PREV_PAGE. (Unconditional)
In the Item section: 90: P7_PREV_PAGE Hidden
In the Button section for cancel Button: &P7_PREV_PAGE.
Here is the description of the function in the tutorial:
Because this Create/Edit page will be called from several places, when users finish with the display they should return to the calling page. To accomplish this, you create an item and change the branch on this page. Every time this page is called, the item must be set with the number of the calling page.
To create a hidden item:
1. Under Items, click the Create icon.
2. For Select Item Type, select Hidden and click Next.
3. For Display Position and Name:
1. For Item Name, enter:
P7_PREV_PAGE
2. For Region, select Issue Identification.
3. Click Next.
4.
Click Create Item.
Next, edit the Cancel button.
5. Under Buttons, select Cancel.
6. Scroll down to Optional URL Redirect.
7. In Page, enter:
&P7_PREV_PAGE.
Note the period at the end.
8. Click Apply Changes.
Next, edit the branch.
9. Under Action, enter the following in Page:
&P7_PREV_PAGE.
10. Click Apply Changes.
All steps are done but I still got the message: Error ERR-1016 Application "106" Page "0" not found (requested language="de")
OK
I move the mousepointer over the cancel button: javascript:redirect('f?p=106:0:5265993428922076876::NO:::')
Thank you for helping me!
best regards Thorsten

All,
I haven't looked at that tutorial for quite a while but just gave it a quick look.
Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
-- Sharon

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?

Look here
Order product | Platform, language swap

My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

The Letterbox FX doesn't work as god as before

Similar Messages

Maybe you are looking for