The link isnt working so try this.... ipod help needed immediatley !!!

this document seems to know my exact problem..
"iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date"
.. so i was following exactly what it said and everything was good until i got up to Universal Serial Bus controllers.. i couldn't find anything that said iPod or USB mass storage device...if you look at the example they give on where to find the iPod name or USB mass storage device, i have everything else that is there like the USB root hubs but i dont have anything else that mentions iPod, the USB mass storage device or the Lucent USB open host controller...why don't i have these? and how can i locate/download them them. please help me if you have any idea !!!
the problem is when i connect my iPod to the computer with my USB cable; the computer does not recognize it or something because it does not charge ; the do not disconnect sign doesn't appear; iTunes does not pop up; and i can't add songs to it. i tried the 5 R's recommended and nothing had workedd !! please helppp!!!

yeah im sorry it isnt working the document is under "iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date" sorry about that. also if you have any other solutions to my problem [because this might not be the case] please let me know.

Similar Messages

Ipod help needed immediatley !!! first link didnt work...

this document seems to know my exact problem..
http://docs.info.apple.com/article....
.. so i was following exactly what it said and everything was good until i got up to Universal Serial Bus controllers.. i couldn't find anything that said iPod or USB mass storage device...if you look at the example they give on where to find the iPod name or USB mass storage device, i have everything else that is there like the USB root hubs but i dont have anything else that mentions iPod, the USB mass storage device or the Lucent USB open host controller...why don't i have these? and how can i locate/download them them. please help me if you have any idea !!!
the problem is when i connect my iPod to the computer with my USB cable; the computer does not recognize it or something because it does not charge ; the do not disconnect sign doesn't appear; iTunes does not pop up; and i can't add songs to it. i tried the 5 R's recommended and nothing had workedd !! please helppp!!!

yeah im sorry it isnt working the document is under "iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date" sorry about that. also if you have any other solutions to my problem [because this might not be the case] please let me know.

I have an ios 6.1.6 ipod 4 and the imessage app keeps saying that the messages wont send even though im on wifi ive tried resetting the network settings and signed in and out is it because of the ios that the app isnt working?

I have an ios 6.1.6 ipod 4 and the imessage app keeps saying that the messages wont send even though im on wifi ive tried resetting the network settings and signed in and out is it because of the ios that the app isnt working?

Hi Marius,
If you are having an issue with being unable to send from the Messages application on your iPod touch, I would suggest that you troubleshoot using the steps in this article -
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When I share a link (URL) only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

when I "share a link" (URL) using the pulldown menu in Safari, the email goes to all addresses I indicate, but only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

ı have installed an application about lock system but the application isnt about lock systm this is an code reader. when ı see the application's pictures this is an lock application but content not same. I have got laid...what shoul I do?

I have installed an application about lock system but the application isnt about lock system this is an code reader. When ı see the application's pictures this is an lock application but content not same. I have got laid...what should I do?

semihtinas wrote:
Please make something these fraudsters
You're not addressing Apple here. This is a user to user technical support forum. You can submit feedback to Apple here:
http://www.apple.com/feedback
Other contact information can be found using the Contact Us link at the bottom right of every page.

I took my Pavilion dv6000 apart and now the sound isnt working

So here is the situation...
My fan has been making noise so I wanted to clean out all the dust from inside my Pavilion dv6000. (But that isn't what i need help with right now.) So after I took it all apart and put it back together, I had this problem with turning the computer on. I think it had to do with this little ribbon cable that wasn't going in the spot where it had to be (it was connected to the power button chip.) I finally got that ribbon where it was suppose to be, and tried to turn it on. It still didnt start. The battery light would go on when it was plugged in, but nothing happened when I pushed the power button. I finally decided to give up and clean the finger prints off of it so I could bring it to my IT teacher tomorrow. While cleaning it, it all of a sudden turned on. I dont know what happened. It just turned on by itself. I mean, I could have pushed something while cleaning it, or maybe something was loose and tightened while i was cleaning it. But anyway, I finally got it to turn on. Now while doing homework, I notice the sound isnt working. I really dont want to take it apart if i dont have to becuase this is the last week of school and I need these practice tests that I put on my computer. I was wondering if there is anything I can do to possibly fix my audio without taking it apart. I was thinking if i check for the latest driver maybe that would help, but i have the latest driver and the sound still doesnt work. So does anyone know how I can fix this without taking it apart? If not does anyone know how I can fix it if i do take it apart? (for example, things to check to make sure they are connected or tightened?)
Thanks for your time and help, I really appreciate it.

Hi,
Check this document page 146 (speaker assembly).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

Automatic time is a function of your Wireless carrier. Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6. The current version is 7.1.1. You might try updating your device to the current iOS version.
HTH

Why is the link to my form getting this message? I copied the link right from the page. An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

Why is the link to my form getting this message? I copied the link right from the page. An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

My form - which was working great - disappeared when I did some editing; here is the message I get now.
The form does not exist. Please re-enter the web address as the link may be misspelled.
The link for the form is:
https://adobeformscentral.com/?f=UqJr%2Aas2RJIHPVA4iGIQ6w
Please look into the matter and resolve the issue at the earliest.
Regards,
Vaibhav Nigam

Since I downloaded Firefox 5 I cannot get the links to work for accepting or receiving gifts for Farmville & Frontiersville, what can I do

Since I downloaded Firefox 5 I cannot get the links to work for accepting or receiving gifts for Farmville & Frontiersville, what can I do. When a request is posted on my FB page and I click on it to send or receive a gift it just shows that its "connecting" and sits there for several minutes then only sometimes actually goes to the gift. How can I fix it. My other computer that is still on firefox 4 does not have this problem.

Hello AKBOB, if exist a problem with update or permissions then the better way is to '''download and install the new version'''.
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac#os=mac&browser=fx22 Installing Firefox on Mac]
thank you

TS3221 I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the p

I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the problem?

Maybe:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Also see:
iOS: Troubleshooting backup issues in iTunes

I just converted a document from Word to PDF and the URL links don't work.How can the links to work?

Anyone know how to get the links to work in a PDF that was converted from Word?

Then the problem originates from Microsoft Word; you should ask in the appropriate Microsoft Office forum.

My camera and safari disappeared. I also have a passcode that I must enter and I can't remove it. These areas are grayed-out in settings as well.apple support said probably a software problem. But I didn't want to pay the $70 so I'll try this support

My camera and safari disappeared. I also have a passcode that I must enter and I can't remove it. These areas are grayed-out in settings as well.apple support said probably a software problem. But I didn't want to pay the $70 so I'll try this support

For forgotton passcode
http://support.apple.com/kb/HT1212
For missing icons, these must be somewhere in some folder. if you can't find
Use Settings > General > Reset > Reset Home Screen Layout.

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

The link isnt working so try this.... ipod help needed immediatley !!!

Similar Messages

Maybe you are looking for