The little round button that you press to go home isnt working. What should I do?
The little round button that you press to go home isnt working. What should I do?
Also see:]
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
Similar Messages
-
i broke my iphone 4s screen, then i tried to fix and replace it by myself. unfortunately, i cannot do that correctly. i also damaged my wifi parts and shut off button. and my new screen is very hard to drive and use. i really want to repair those 3 problems. what should i do? how much money will be cost?
Hello!
When there is unauthorized modifications on the iPhone Apple doesnt replace the product. Unfortunately you will need to get a new iPhone!
If you could have contacted Apple when you broke your screen you would be eligible to get a replacement after paying the Out of Warranty service fee.
All the best!
Burcu -
My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just got a new Itouch and I want to sync it with the music on the library I already have but the music wont transfer to my new ipod. What should i do?
What ahppens when yu try to sync? Error messages?
You do have the songs checked that you want to syn, right? -
Do you need to have the same OS as the version of itunes that you're downloading for it to work
I'm recieving an error everytime i try to open my recently downloaded version of iTunes. Not sure if i need the most recent OS in order to open the newer iTunes
No, there's some overlap with the OS versions you can use with different versions of iTunes, but one thing is for certain, you can't use iTunes10 with OSX 10.4.11 You need Leopard at a minimum. The highest you can go with Tiger is 9.2.1 but if you need support for a brand new i-gadget then you need the iTunes specified on the box (at least) and that's likely to be version 10.
-
In the Itunes Wishlist there is no price button that you can push to buy the items. So I cant buy my whole wishlist without doing it all seperatly and I dont know the total price of all the items. Please help!
Both the button and the total cost appear to have been removed in the current version of iTunes - I don't have them either and other people have posted about it as well. You can try leaving feedback for Apple and maybe they'll be added back in a future update : http://www.apple.com/feedback/itunesapp.html
-
The round button that allows me to get out of an app or to move or delete an app has stopped working. Once I am in an app, the only way to get out of it is to power off my ipod completely. Help!
Try this previous discussion:
FIX for iPod Touch Home Button: Apple Support Communities -
Hey there Apple Users
I would like some assistance with my iPad please
My iPad is stuck. The little box stating that there is not enough iCloud storage available will not close or allow me to go to settings....I have tried to shut it down but it won't let me access the slide to power off button either. Any thoughts???Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
TS4436 I cant switch between cameras on my iphone 5 , the little switch button is gone
I can no longer switch from the front camera to the main camera, the little switch button is gone.
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
Mobile Me was so handy. I pushed the little sync button and everything updated. Is there any equivalent for I Cloud?
Welcome to the Apple Community.
Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage. (not all these alternatives offer all the services previously provided by iDisk) -
How do I get the little screen back, that tells me how much ink I have left in my print cartridges? It used to show up whenever I would print something, now it doesn't and I have no idea how much ink is left in the cartridges. I have a HP Photosmart C4180 All in One Printer. I recently purchased new computer, a HP Pavilion P7-1254 AMD Vision, which runs Windows 7. I just want to know how to get the screen back that tells me how much ink I have left. Thanks.
Hi there pyesangel,
Open the Printer Toolbox . There are two ways to do this:
Open HP Solution Center , select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
Open Printers and Faxes in the Windows Control Panel , then right-click your printer icon and choose Properties . Click Printing Preferences . Click the Features tab, then click the Printer Services button.
The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.
Figure 1: Estimated ink levels
Give it a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows package installler what can i do ? help me
Hi,
Firstly make sure you save it to your hard disk, and then run setup from there.
If it doesn't help, you may also try to unregister Windows Installer, and then reregister Windows Installer and check if it helps. To do this, follow these steps:
1. Press Windows Key + R
2. In the "run" box, type "msiexec /unreg", and then press ENTER.
3. Press Windows Key + R
4. In the "run" box, type "msiexec /regserver", and then press ENTER.
Besides that, You could try to create a new user to download and install the application.
Karen Hu
TechNet Community Support
Maybe you are looking for
-
How do i zoom in a video on the iphone 5
How do i zoom when taking video on the iPhone 5?
-
How to find native memory usage for a domain
Hi All, We want to know how to find out current native momory utilization for a perticular weblogic domain. Basically we want to increase our current JVM heap size from 2 GB to 3.5GB because of 32 bit JDK restriction we are not having confident to in
-
I have been watching The secret life of the american teenager series 6 and I have noticed that episode 4 is missing, is there anything i can do??
-
CS4 eye dropper values disappear after grouping mask layer with next layer
Have an adjustment/curve with a mask (layer1). Under layer 1 is a second layer with just an image needing color correction(layer2). When I group the top layer1 with image layer2, the colour values disappear in the info pallette. Never did this in
-
Changing default actions in Nautilus
Hi, somehow I've managed to make the standard action for opening the home folder, desktop and other volumes from the Gnome Panel 'Places' tab, to open with Totem. Pretty annoying. It's only from that tab as well, opening them from the desktop icons o