The log & capture window has become disabled...can control cam, but no vid.

I have been capturing 24p footage from the DVX100a and the log & capture feature has been working fine, until after the print to video feature was used. Now the device control works, but it will only display color bars. I have checked and rechecked the audio/video settings, as well as user preferences. Am I missing something simple?

? Am I missing something simple? < </div>
Probably but it's impossible to tell from here. Search the forum for your camera model and for preview disabled. We get at least one post a day on these topics. I don't follow the threads, I just see them all the time.
Try shutting down your system, disconnect the FW stuff, restart. Usually resets the FW bus. But there are many cameras out there now that tend to drop in and out of the preview window.
bogiesan

Similar Messages

  • IMovie can control camera, but doesn't import the movie.

    I have a Canon ZR500 plugged directly into my iMac using DV/Firewire.
    iMovie goes through all the correct steps to import my movie off of the camera - I can play, pause, RW, FF, etc. all through iMovie, but when I click the import button in iMovie I just get a blue screen with a timer. The timer counts down but no movie is imported.
    I've repaired permissions and tried 2 different cables and nothing helps.
    Any ideas?

    I am having the same issues as you described as well. I am using a Cannon HD20 with the playback set for HDV, with imovie HD ( iLife 06) set up for video HD 1080i. I am able to control the camera from from the imovie screen however when it comes to either play or import the camera responds with the commands but I only see a blue screen on the mac. I uploaded today to Leopard thinking perhaps that might help and to no avail. I am extremely frustrated I hope someone has an idea what to try next.

  • In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

    In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
    These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

    Yea, and it's a pain to get to.  What was the rational for removing the print size button?   With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size.  Of all the buttons you could have taken away, why not fill screen?  I never use that.
    Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop.   The Brush preview window is  unchanged in CC but in CC2014 it's basically worthless.  If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

  • As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version?

    As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version 5.7?
    Thanks for any help you can provide.

    LR on your laptop is still a desktop version.  It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
    I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time.  Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

  • HT1212 my i pad has become disabled. it has been said i will have to wipe out everything, which will mean i will lose all of my pictures. there must be another way i can open my i pad!!! I am not able to connect to i tunes which was another choice.

    i need help with my i pad which has become disabled. the screen is saying i have to connect with i tunes but that is not possible. i don't want to wipe everything out and lose my pictures. please tell me there is another way to open up my i pad without losing my pictures. thanks for any help!

    Sorry, but you'll have to restore it.  And if it's running iOS 7 with Find My iPad enabled, you'll have to force it into recovery mode in order to restore it, as explained here: http://support.apple.com/kb/ht1808.
    If you have a backup to restore from, that will include your camera roll photos.

  • Dropped ice cream on macbook. now the keyboard has become sticky. can i get it cleaned from the inside from applre store or or somewhere else?

    dropped ice cream on macbook. now the keyboard has become sticky. can i get it cleaned from the inside from applre store or or somewhere else?

    If the ice cream as only affected the keyboard and not run onto other components they will perhaps suggest a new keyboard, I would be surprised if the could economically clean it up. If it as gone on the logic board then that is another problem.

  • How do I restart my computer for updates without having it reset because the log in window, suddenly, now appears?

    How do I restart my macbook for updates without having it reset because the log in window, suddenly, now appears? I've never had this issue until a few days ago when there were updates available. Somewhere the settings were changed. I may have inadvertently changed a log in preference but can't trace it back.

    That usually doesn't happen (unless you do not use automatic login) unless you boot into Safe Mode. When prompted do you enter your admin password? What happens when you do that?

  • My I-phone 3 has become disabled, how do I enable it?

    My I-phone 3 has become disabled, how do I enable it?

    Hello Sandy,
    Welcome to the Apple Support Communities. To get an iPhone out of being disabled, then the next step would be to restore the iPhone. The following article will assist with that process.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Regards,
    -Norm G.

  • Automatically return to the log in window ...

    Hi ...   Can I automatically return to the log in window just before my computer goes to sleep ?

    No, but you can require a password to wake from sleep. See the settings in the General pane of System Preferences -> Security &amp; Privacy.

  • The logo for airplay has dissapeared how can I get it back

    Hello, I have a problem, i am trying to play a movie from itunes to apple tv, however, i can't since I have no clue wher the icon for airplay has gone.  Can anyone help me?

    What did you change on the AOL display page?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    If fonts are messed up or look blurry then try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page and leave hardware acceleration otherwise enabled.
    *[[/questions/942265]] Font is messed up on Firefox 17.0
    *http://kb.mozillazine.org/about:config
    If you have changed setting in Firefox Options and you can't remember where then try to rename or delete the prefs.js file and a possible user.js file to reset all prefs to the default values.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder

  • HT3799 locked out at the log in window ?

    i have recently installed Maverick on my late 2010 MB Air that is locked at the log in window . I have tried to enter Disk Utility with r-cmd but end up on a grey screen with a Pad-Lock and a request for my firmware p/w is there a default p/w ?

    RockeyIV,
    no, there isn’t a default firmware password; the default is to have no firmware password. If your MacBook Air has a firmware password, then someone set it up that way.

  • TS2446 Got the "Your apple ID has been disabled" msg

    Got the "Your apple ID has been disabled" msg ... and I have already changed my password using "iForgot".
    Still can't update my apps though. What must I do to make it work ???

    I would suggest for you to get in touch the Account Security Team so they can verify your account and investigate this error message.
    To contact an Account Security Advisor, see this article:
    Contacting Apple for support and service
    http://support.apple.com/kb/HE57
    Or you can schedule a call on your most convenient time at this link:
    https://expresslane.apple.com/GetproductgroupList.do?

  • Redock the log/message window in it's orginial place at the bottom?

    How do I re-dock the log/message window in it's orginal place at the bottom? When ever I try re-docking it goes to the left side of the screen. I can drag and float the window back done to the bottom but I would prefer for it to go back to it's orginal position. I've located the windowinglayout.xml file but not really sure what I should change.
    JDeveloper: 10.1.3.3
    Thanks

    Ok if I'm following you correctly I dragged the undocked Message-log window down to the bottom of the code editor. The dragged window is violet/purple color with the following verbiage "Use Ctrl key to prevent docking Use Esc key to cancel ". I let go of the window and it is now floating there. I want it to dock instead of float at this location. What exactly is the drop indicator?
    Thanks,
    Russ

  • It seems my Wifi on/off button has become disabled.  Any ideas as to how tom enable and turn on?

    It seems my Wifi on/off button has become disabled on my IPhone 4S.  Any ideas as to how to enable it to turn on?

    I been having the same problem with my iPhone 4S my iPhone its upgraded to the new version and my wifi does not want to turn on its dim gray I tried reseting it and pressing the home and the power button i have resset my network setting but its no help I don't know what else to do?

  • What do I do if my IPOD touch has become disabled?

    What do I do if my IPOD has become disabled??

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for