The log message :%OS-OBFLMGR-7-QUEUE_LIMIT_OVER

Hi
There is a log message.
obflmgr[67]: %OS-OBFLMGR-7-QUEUE_LIMIT_OVER : The queue:5008d2c8 for device:configflash: entry_num:101 and the max limit:100. The new request for temperature will be discarded.
How to resovle the problem ? And wha is the meaning of "OBFLMGR"? Thank you for your help .

OBFL is on-board failure logging, this is a subsystem that contiuously logs all environmental data to the bootflash: of the router boards, so our development can identify trends & root causes in case of multiple long-term hardware failures, for example. Here a file got corrupted during the multiple read/write, it can happen.
Try the following, where x is the linecard reporting the error:
(admin)#clear logging onboard corrupted-files location 0/x/CPU0
Clear logging onboard corrupted-files [confirm] [y/n] :y
If that doesn't stop the mesage you can manually delete the files starting with 'temp' on the bootflash of the affected board.
This has no impact on router operations.

Similar Messages

What means is the log message? Thanks

Hi, everyone:
I have installed the Database 10g and Database Companion under the RedHat Linux ES3 successful.
But after start the Apache server using the command
opmnctl startall
there are very many log message
...(date time)... [4] Local connection 0,127.0.0.1,6100 missing form factor
are written to the log file opmn/logs/ons.log.
What means is the log message and how I correct the error?
Thank you very much!

IT 267 is the Additional Offcycle Payments. For Example Bonus/ Car Allowance / Re-imbursement etc. as you configure in your system. In Off cycle workbench (TCODE = PUOC_10), when you are executing the Payroll for "Additional Payment", we can also see IT0267.
For Log, select "Display Log" in the program RPCALCU0(US payroll). You can run payroll in the SIM mode and see the log.
For Offcycle, I think you need to look at the Payroll result table (TCODE = pc_payresult) and check the cluster table for the Pay Period.
Hope this helps !

What Does The Log Message "Rejecting update: Lease..." Mean?

I use RelicatedCache and TransactionMap on Coherence 3.4.2.
I saw "Rejecting update: Lease..." message.
What does the log message mean?
2011/10/18 06:41:57.506 [DEBUG] Logger@9263394 3.4.2/411p16 N/A NOAH Coherence 3.4.2/411p16 [D4] (thread=ReplicatedCache, member=2): Rejecting update: Lease: [-8863526970089418959, -2793231267399579492, R] (Cache=issue-code, Size=Unknown, Version=0/0, IssuerId=1, HolderId=0, Status=LEASE_AVAILABLE, Last locked at Thu Jan 01 09:00:00 JST 1970)
by member=2, Lease: [-8863526970089418959, -2793231267399579492, R] (Cache=issue-code, Size=143, Version=0/0, IssuerId=2, HolderId=0, Status=LEASE_AVAILABLE, Last locked at Tue Oct 18 06:41:51 JST 2011)
I found a Note 1065352.1, but the message is little differnt...
Note 1065352.1
"What Does The Log Message "Rejected update: Lease..." Mean?"I'd like to know following 2 points..
- What does "Rejecting update: Lease..." message mean?
Do thsese messages have same meaning?
- My application didn't catch any exceptions, and
"CacheFactory.commitTransactionCollection" returned true.
So this "Rejecting update: Lease..." is not a error message, right?
(Does the transaction commited successfully?)
Thanks in advance.
-Noriyuki

Hi
These are decoded results of the error message which u have recd in ur box..
%C4K_PKTPROCESSING-4-ERRORPACKET: [char]
The software is unable to process a packet; the packets have been forwarded to the CPU instead and the packet will be dropped.
Recommended Action: This is an informational message only. No action is required.
%C4K_HWACLMAN-4-WARNINGSTRING: [char]
A nonspecific warning message was displayed.
Recommended Action: See the message string [char] for more information.
Related documents- No specific documents apply to this error message
%C4K_HWACLMAN-4-WARNINGSTRING: [char]
A nonspecific warning message was displayed.
Recommended Action: See the message string [char] for more information.
Related documents- No specific documents apply to this error message.
regds

Redock the log/message window in it's orginial place at the bottom?

How do I re-dock the log/message window in it's orginal place at the bottom? When ever I try re-docking it goes to the left side of the screen. I can drag and float the window back done to the bottom but I would prefer for it to go back to it's orginal position. I've located the windowinglayout.xml file but not really sure what I should change.
JDeveloper: 10.1.3.3
Thanks

Ok if I'm following you correctly I dragged the undocked Message-log window down to the bottom of the code editor. The dragged window is violet/purple color with the following verbiage "Use Ctrl key to prevent docking Use Esc key to cancel ". I let go of the window and it is now floating there. I want it to dock instead of float at this location. What exactly is the drop indicator?
Thanks,
Russ

GC: meaning / interpreting the log messages of -verbose:gc / PrintGCDetails

Hello,
i have a webapp running in tomcat 4 and at some point in time the whole app starts running very slow. after some debugging and experiencing with VM settings, especial GC logging settings i saw that the consumed memory from NewGen is never free'd, and, if i understand correct, is not copy'd to OldGen. Are the new objects allocated in OldGen? The GC there is able to free memory everytime GC runs, but the time for that collection is very long, and i think the reason why our app runs so slow ...
Can anybody explain me the behaviour of the VM? (Java version: 1.4.2_06)
33249.940: [GC 33249.940: [DefNew: 409599K->409599K(460800K), 0.0000420 secs]33249.940: [Tenured: 192446K->193182K(409600K), 1.2274960 secs] 602046K->193182K(870400K), 1.2276930 secs]
33252.139: [GC 33252.139: [DefNew: 409599K->409599K(460800K), 0.0000430 secs]33252.139: [Tenured: 193182K->193633K(409600K), 1.5801410 secs] 602782K->193633K(870400K), 1.5803400 secs]
33255.535: [GC 33255.535: [DefNew: 409593K->409593K(460800K), 0.0000370 secs]33255.535: [Tenured: 193633K->191216K(409600K), 2.1173670 secs] 603226K->191216K(870400K), 2.1175360 secs]
33258.457: [GC 33258.457: [DefNew: 409599K->409599K(460800K), 0.0000400 secs]33258.457: [Tenured: 191216K->192107K(409600K), 1.1388990 secs] 600816K->192107K(870400K), 1.1390530 secs]
thx, Chris

Hi Chris
Refer this you will know .,
http://java.sun.com/docs/hotspot/gc1.4.2/example.html
-Krish

GC: interpreting the log messages using -verbose:gc and PrintGCDetails

Hello,
i have a webapp running in tomcat 4 and at some point in time the whole app starts running very slow. after some debugging and experiencing with VM settings, especial GC logging settings i saw that the consumed memory from NewGen is never free'd, and, if i understand correct, is not copy'd to OldGen. Are the new objects allocated in OldGen? The GC there is able to free memory everytime GC runs, but the time for that collection is very long, and i think the reason why our app runs so slow ...
Can anybody explain me the behaviour of the VM? (Java version: 1.4.2_06)
33249.940: [GC 33249.940: [DefNew: 409599K->409599K(460800K), 0.0000420 secs]33249.940: [Tenured: 192446K->193182K(409600K), 1.2274960 secs] 602046K->193182K(870400K), 1.2276930 secs]
33252.139: [GC 33252.139: [DefNew: 409599K->409599K(460800K), 0.0000430 secs]33252.139: [Tenured: 193182K->193633K(409600K), 1.5801410 secs] 602782K->193633K(870400K), 1.5803400 secs]
33255.535: [GC 33255.535: [DefNew: 409593K->409593K(460800K), 0.0000370 secs]33255.535: [Tenured: 193633K->191216K(409600K), 2.1173670 secs] 603226K->191216K(870400K), 2.1175360 secs]
33258.457: [GC 33258.457: [DefNew: 409599K->409599K(460800K), 0.0000400 secs]33258.457: [Tenured: 191216K->192107K(409600K), 1.1388990 secs] 600816K->192107K(870400K), 1.1390530 secs]
thx, Chris

Hi Chris
Refer this you will know .,
http://java.sun.com/docs/hotspot/gc1.4.2/example.html
-Krish

Ipod Nano not recognized by itunes but appears on the explorer. Log message

My ipod doesn't appear on itunes but is recognized by windows. It used to work before.
I have found several answers to this problem but no one can't solve the problem : 5R, Terminal Service, Ipod Service, Restore, Reset, Usb, Last version of Itunes....
With the last version of Itunes, I have launched the diagnotisc and the result is four green led.
I have recorded the log file and into this one there are few message that show errors (I have copied only interesting messages):
[SERVICE: 0x140,08:48:25 ERROR] Did not find first letter of stage
[SERVICE: 0x980,08:51:21 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x980,08:51:21 INFO] File does not exist!
[SERVICE: 0x980,08:51:21 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x980,08:51:21 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x980,08:51:21 INFO] [1] ReadDevicePreferences() failed!
I can't understand these messages but I have the feeling that they have a relation with the hidden file Preferences store in ipod_control\device
When I tried to open Preferences with "bloc note" of windows it doesn't work. Maybe this file is corrupted seen that I can open the file "SysInfo" which is in the same repertory. When I format the Ipod with FAT32, these files reappeared with the next power on and I have always same problem.
Does anyone know if this file "Preferences" is readable with a valid iPOD?
What mean "Did not find first letter of stage?" of the log message?
Thanks for your answers,
Nicolas

If its brand new and doing this, return it with receipt.

Log Messages from Transaction Event Logger

I have 4 instances of MII v12.1 and within a transaction I want to add a message to the log when the transaction runs so I can view it through the message logger. All 4 MII instances were installed by the same consultant a few years ago so there "should" be no differences in the log configs. On 3 of the instances this is working fine - I have created a very simple transaction with one Event Logger action configured with a message "Test Message" and when I execute the transaction I see the correct entry in the log viewer. On the fourth however, although the transaction executes without error I am not seeing anything in the viewer for this event. I am using the standard "last 24 hours" log viewer with no filters and no specific log locations selected, and no customisations. I am seeing other system generated messages. I found some documentation about logging and the viewer and I found the Netweaver log config but as far as I can see it looks consistent between the instance which is working and the one which is not working. Is there some other config which needs to be done to enable Event Logging from transactions? My user has the same access across all instances. Any guidance would be appreciated. I attach a screen shot of what I am expecting to see (taken from one of the instances which is working).

Hi Partha
Many thanks for your reply. I have tried this and unfortunately it makes no difference. I also checked on the other instances and found they have their tracing levels all set to error, not Info. I have also noticed that on the instance which is working, in the System Configuration section at the bottom of the Log Config page - for Applications and all sub categories I see the entry .\log\applications_00.log in the Pattern column. On the instance which is not working I see that entry for the Applications root but not for any of the sub categories (even after selecting Copy to subtree). I cannot see where I can set this value (there is no modify function available, even under Administrator login).
Also, when I look at the log messages which have generated when setting the Event Type to Error on the instance which is not working, it shows one entry and the Category and Location columns show <com.sap.xmii.bls.executables.action.logging.LoggingActions>. When I generate an event with type Error on the instance which is working I get 2 log messages, one with the Category and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions> and the other with Category /Applications/XMII/Xacute/Event and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions>.
I guess that the .\log\applications_00.log should be showing for all subtree items under Applications and because it is not then the messages are not going into any application log. Not sure how to fix this however.
I have also reset to the default configuration and it does not change the above.
Best Rgds
Richard

How to Write Log Message in a XML Data Source Report

Hi Friends,
Can anyone help me out what is the process of writing a log file in the XML Data Source Report. for eg: in Plsql we use FND_LOG.PUT_LINE to print the Log message in the Concurrent Request Output. in the similar manner, when we develop a report using XML, where we write Coding in XQuery of XML, what is the process need to follow to print the logs for the XQuery.
Any inputs/Suggestion on this Highly appreciable.
Thanks in advance.

Create an RMI application (for example) that writes the log, and let all logging calls call that remote application.
Something like that is the only feasible way that doesn't require you to have a drive on the remote machine mapped to the local one (which causes its own problems as you could have multiple simultaneous write attempts...).

PL/SQL log messages are not printing from Java concurrent program

Hi,
I have a strange issue while submitting the Java concurrent program through PL/SQL.
I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages. But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
Thanks
Suriya

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Mac starts up by itself at 1 am some nights... Can anyone help me stop this from happening based on reading my system log messages?

My Mac starts itself automatically around 1:00 am about ever other night. I don't want it to do that. I had a backup program installed once that was set to do the backup at that time, but I have long since uninstalled that program. Yet the computer still powers on automatically. I checked in the control panels and don't see it set to do that. I used the Console program to check my log, but I don't know how to read what it says. Here are the log messages from the last time the computer started itself automatically:
Sep 16 00:58:00 tio-E kernel[0]: System Sleep
Sep 16 00:58:00 tio-E kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 16 00:58:00 tio-E kernel[0]: Started CPU 01
Sep 16 00:58:00 tio-E kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Sep 16 00:58:00 tio-E kernel[0]: System Wake
Sep 16 00:58:09 tio-E lookupd[213]: lookupd (version 369.8) starting - Mon Sep 16 00:58:09 2013
Sep 16 00:58:09 tio-E configd[37]: rtmsg: error writing to routing socket
Sep 16 00:58:26 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "CPL" on any channel (directed scan)
Sep 16 00:58:26 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "CPL" on channel(s) 6
Sep 16 00:58:37 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "default" on any channel (directed scan)
Sep 16 00:58:37 tio-E /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "default" on channel(s) 6
Sep 16 00:58:40 tio-E kernel[0]: WLC_E_COUNTRY_CODE_CHANGED
Sep 16 00:58:40 tio-E kernel[0]: en1: 802.11d country code set to 'US'.
Sep 16 00:58:40 tio-E kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Sep 16 00:58:41 tio-E kernel[0]: MAC AUTH succeeded
Sep 16 00:58:45 tio-E configd[37]: posting notification com.apple.system.config.network_change
Sep 16 00:58:45 tio-E lookupd[218]: lookupd (version 369.8) starting - Mon Sep 16 00:58:45 2013
Can anyone help me get to the root of this problem?

Hi Edwardo,
Perhaps there's remnants of that App you're not aware of... what was it?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Which table stores MII log messages

Hi ,
Can anyone let me know the name of the table where MII stores all the log messages? As far as I know Netweaver is using one SQL Server database internally to store all the MII log messages. I would like to know the name of the table where these logs are residing
Thanks in advance
Shaji

Hi ,
It is stored in a file.
The below two links should clear your doubts :
http://wiki.sdn.sap.com/wiki/display/xMII/NetweaverCEBasicsforMII
Writing log messages into DB
Regards,
Arun

Re: Remove log messages from loop

CURSOR cur_item_rev_child IS
SELECT ffv.flex_value, --org code
mp.organization_id
FROM fnd_flex_values ffv,
fnd_flex_value_sets ffvs,
mtl_parameters mp
WHERE ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'EMR Add Spec Org' -- Changed by WIPRO on 01-OCT-12 (SR # 1078990 )--
AND NVL(ffv.enabled_flag, 'N') = 'Y'
AND ffv.flex_value = mp.organization_code
AND mp.master_organization_id = v_num_master_org;
CURSOR cur_item_rev (i_num_organization_id NUMBER)
IS
SELECT /*+ index(xvasd XXINV_VLVS_ADD_SPEC_DETAILS_N1 )*/mirb.inventory_item_id,
mirb.organization_id,
MAX(mirb.revision) item_revision,
msib.segment1, -- Added by Infosys on 19-May-09
xvasd.spec_revision spec_revision -- Added by Infosys on 19-May-09
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias,
mtl_parameters mp,
mtl_system_items_b msib,
mtl_item_revisions_b mirb
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvasd.spec_status='ACTIVE'
AND xvias.inv_item_id = msib.inventory_item_id
AND mirb.inventory_item_id=msib.inventory_item_id
AND xvias.organization_id = msib.organization_id
AND msib.organization_id = mirb.organization_id
AND mirb.organization_id = mp.organization_id
AND mp.organization_id = i_num_organization_id
--AND LPAD (xvasd.spec_revision, 3, 0) LPAD (b.revision, 3, 0)
GROUP BY mirb.inventory_item_id,
mirb.organization_id,
msib.segment1,
xvasd.spec_revision;
BEGIN
o_chr_errbuf := 'Program Completed Successfully';
o_num_retcode := 0;
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output, '');
--Starting the Program
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG, 'Input Parameter');
fnd_file.put_line(fnd_file.LOG, '---------------');
fnd_file.put_line(fnd_file.LOG, 'Debug Mode: ' || v_chr_debug_mode);
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
-- Get the value of the spec type from the lookup. If no value is set then display the error message and raise exception
IF v_chr_spec_type IS NULL
THEN
fnd_file.put_line(fnd_file.LOG,
'Error: Set a value for the profile: XXINV : Additional Spec Type VLVS');
RAISE excp_user;
ELSE
fnd_file.put_line(fnd_file.LOG,
'Processing for the addition spec item type: ' ||
v_chr_spec_type);
END IF;
-- Select all the eligible records for processing
FOR rec_cur_item_rev_child IN cur_item_rev_child
LOOP
FOR rec_cur_item_rev IN cur_item_rev (rec_cur_item_rev_child.organization_id)
LOOP
-- v_chr_spec_rev := NULL;
-- v_chr_item_number := NULL; Commented by Infosys on 19-May-09
/* BEGIN --Start of comments by Infosys on 19-May-09
SELECT segment1
INTO v_chr_item_number
FROM mtl_system_items_b
WHERE inventory_item_id = rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_item_number := NULL;
fnd_file.put_line(fnd_file.LOG,'Item Number not found in MTL_SYSTEM_ITEMS_B Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_item_number := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
/*BEGIN --Start of comments by Infosys on 19-May-09
SELECT MAX(spec_revision)
INTO v_chr_spec_rev
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvias.inv_item_id =rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id
GROUP BY xvias.inv_item_id,
organization_id,
xvias.spec_type;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_spec_rev := NULL;
fnd_file.put_line(fnd_file.LOG,'Spec Revision not found in Additional Specs Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_spec_rev := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
v_num_total_cnt := v_num_total_cnt + 1;
--to take count of the total records processed
v_chr_error_flag := 'N'; reset the error flag to N before processing each record
v_num_revision_id := NULL;
IF v_num_total_cnt = 1
THEN
v_chr_output_hdr := 'ORG CODE' ||
RPAD('|ITEM NUMBER', 51, ' ') ||
'|ITEM REV' || '|SPEC REV' ||
'|ERROR REASON';
END IF;
-- Check if the revision on the spec is greater that the revision on the item
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) > LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
SELECT mtl_item_revisions_b_s.NEXTVAL
INTO v_num_revision_id
FROM DUAL;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when getting the new revision id from the sequence MTL_ITEM_REVISIONS_B_S: ' ||
SQLERRM;
RAISE excp_loop;
END;
-- begin block for assigning values and calling API to update the item revisions
BEGIN
v_rec_item_revision.inventory_item_id := rec_cur_item_rev.inventory_item_id;
v_rec_item_revision.organization_id := rec_cur_item_rev_child.organization_id;
v_rec_item_revision.revision_id := v_num_revision_id;
v_rec_item_revision.revision := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_label := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_reason := 'Updated the Item Revision';
v_rec_item_revision.implementation_date := v_dte_sysdate;
v_rec_item_revision.effectivity_date := v_dte_sysdate;
v_rec_item_revision.attribute_category := NULL;
v_rec_item_revision.attribute1 := NULL;
v_rec_item_revision.attribute2 := NULL;
v_rec_item_revision.attribute3 := NULL;
v_rec_item_revision.attribute4 := NULL;
v_rec_item_revision.attribute5 := NULL;
v_rec_item_revision.attribute6 := NULL;
v_rec_item_revision.attribute7 := NULL;
v_rec_item_revision.attribute8 := NULL;
v_rec_item_revision.attribute9 := NULL;
v_rec_item_revision.attribute10 := NULL;
v_rec_item_revision.attribute11 := NULL;
v_rec_item_revision.attribute12 := NULL;
v_rec_item_revision.attribute13 := NULL;
v_rec_item_revision.attribute14 := NULL;
v_rec_item_revision.attribute15 := NULL;
v_rec_item_revision.description := NULL;
v_rec_item_revision.creation_date := v_dte_sysdate;
v_rec_item_revision.created_by := v_num_user_id;
v_rec_item_revision.last_update_date := v_dte_sysdate;
v_rec_item_revision.last_updated_by := v_num_user_id;
v_rec_item_revision.last_update_login := v_num_login_id;
v_rec_item_revision.request_id := v_num_request_id;
v_rec_item_revision.program_id := v_num_program_id;
v_rec_item_revision.program_application_id := v_num_prog_appln_id;
mtl_item_revisions_util.insert_row(p_item_revision_rec => v_rec_item_revision,
x_rowid => v_chr_ret_rowid);
v_num_succ_cnt := v_num_succ_cnt + 1;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when updating the revisions: ' ||
SQLERRM;
RAISE excp_loop;
END;
ELSE -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0)
v_chr_temp_msg := 'Item Revision is greater than the Spec Revision';
o_num_retcode := 1;
v_num_err_cnt := v_num_err_cnt + 1;
ROLLBACK;
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Organization Code: ' ||
rec_cur_item_rev_child.flex_value); -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Item Number: ' ||
rec_cur_item_rev.segment1);
fnd_file.put_line(fnd_file.LOG,
'Item Revision: ' ||
rec_cur_item_rev.item_revision); -- v_chr_item_revision_child -- -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Spec Revision: ' ||
rec_cur_item_rev.spec_revision);
fnd_file.put_line(fnd_file.LOG,
'Error: ' ||
v_chr_temp_msg);
fnd_file.put_line(fnd_file.LOG,
v_chr_output_msg := v_chr_output_msg ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child, added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
CHR(10);
v_chr_mail_body := v_chr_mail_body ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
-- Display the statistics details in the output file
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output,
'Number of items selected for update: ' ||
v_num_total_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items updated: ' || v_num_succ_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items not updated: ' || v_num_err_cnt);
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output, v_chr_output_hdr);
* Print out the output message from CLOB variable "v_chr_output_msg"
* Substr each line whenever we find the separator CHR(10)
* Print each line with fnd_file.output function
BEGIN
v_num_offset := 1;
v_num_instr := 0;
LOOP
EXIT WHEN v_num_offset > dbms_lob.getlength(v_chr_output_msg);
-- Get the position of CHR(10) when first time appearence.
v_num_instr := dbms_lob.instr(v_chr_output_msg,
CHR(10),
v_num_offset,
1);
v_num_line_length := v_num_instr - v_num_offset + 1;
-- Substr the each line and print it out
fnd_file.put_line(fnd_file.output,
dbms_lob.substr(v_chr_output_msg,
v_num_line_length - 1,
v_num_offset));
v_num_offset := v_num_offset + v_num_line_length;
END LOOP;
END;
END IF; -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0) --
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Porcessing next record as a Error occured in cursor loop cur_item_rev : ' ||
SQLERRM);
END;
END IF;
END LOOP; -- cur_item_rev --
END LOOP; -- cur_item_rev_child --
-- calling the mail procedure --
IF v_num_err_cnt > 0
THEN
BEGIN
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Calling send_notification Procedure...');
send_notification(o_chr_ret_code => v_chr_status,
o_chr_ret_mesg => v_chr_temp_msg,
i_chr_subject => 'EMR INV Item Revisions Update Program VLVS - ' ||
v_dte_sysdate,
i_chr_body => v_chr_mail_body);
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when calling Procedure send_notification .';
fnd_file.put_line(fnd_file.LOG,
'Error details : ' || v_chr_temp_msg ||
' - ' || SQLERRM);
RAISE excp_user;
END;
END IF;
EXCEPTION
/*WHEN excp_loop THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf ||
'Program completed with error when getting the max revision';
o_num_retcode := 2;*/
WHEN excp_user THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Error in Item Revisions Update Program: ' ||
SQLERRM);
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
END update_item_revision;

I need to remove the log messages from loop...As currently log file printing is in loop....Can you please tell how to remove log file messages from loop.

Warning Log message showing multiple times during create/update registration

During registration the following error is getting repeated
Warning Sat Feb 14 15:38:15 CST 2015 1423949895405 /atg/dynamo/servlet/pipeline/RequestScopeManager/RequestScope-1266341/atg/userprofiling/ProfileFormHandler Using default setting for ProfileTools property
/atg/userprofiling/ProfileFormHandler Using default setting for ProfileTools property
This message shows up like a billion times in the logs. To be more specific, it shows up over 30,000 times in the past week.
Please let me know how to turn off this warning and We want logging turned on for INFO, WARN, and ERROR. Simply setting the logging level to hide the log isn't the fix we're looking for. Please let me know what is causing the log message to appear in ATG.
please guide me to find the solution.

In your ProfileFormHandler have you overriden the profileTools property ? It seems like the ProfileTools is resolving to Null and what is happening is that every time the request scope ProfileFormHandler is initializing it is finding the ProfileTools property as null so it throws that warning and initializes ProfileTools component with default setting.
So check if you have overriden the ProfileTools property or component itself or have changed its path which may be throwing error in logs during startup or component initialization and is causing it to be null, and if you haven't changed it then you can also try to put profileTools = /atg/userprofiling/ProfileTools in your code base ProfileFormHandler property file to explicitly resolve it which should also prevent that warning.

Re Logs Messages in BDC

Hi ,
I have a requirement to worl with log messages created when we execute a BDC session method.I want to know the table in which the log messages will be stored.
<b>Points will be rewarded for all helpful answers.</b>
Thanks.

Thanks Both of you.
My requiremebnt is some thing like this.I have created a session and processed it now I got the logs for it now i want to use the logs in other program how can i do it.
Thanks

The log message :%OS-OBFLMGR-7-QUEUE_LIMIT_OVER

Similar Messages

Maybe you are looking for