The "Logical AND" functoid has place holders. Replace these with appropriate links or constants.

Hi,
I am getting the below error in the BizTalk Mapper when trying to compile the application.
The "Logical AND" functoid has place holders. Replace these with appropriate links or constants.
Kindly advice the cause of the error.
Thanks
Regards, Vivin.

Hi Morten,
I found the issue!! There were two AND functoids with a invalid input parameter and I removed those and the error disappeared.
Thanks for the helping in finding the cause.
Regards, Vivin.

Similar Messages

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

The network description (KTEXT) has to be replaced for all existing network

Dear All,
Transaction code: CJ20N.
1. The network description (KTEXT) has to be replaced for all existing networks(AUFNR) in production client, by a combination of the project number ( 10 characters) + 1 space ( 1 character) and a truncated project description ( 29 characters).
2. The tables and fields involved are described here.
        Table            Table description            Field              Field description
          PROJ           Project definition          PSPID          Description
                                                            POST1
PSPNR         Project definition (internal)
CAUFV                                      KTEXT          Short text
                                                 PRONR           Project definition
                                                  AUFNR           Order Number
AUFK                                      AUFNR            Order number
                                               KTEXT            Short text
Please guide me how to write the logic through BDC or any other way is there.
Urgent.
Regards,
Karthik.

Hi,
to update the networks you may use FM BAPI_NETWORK_MAINTAIN. It is well documented in function library; there is an example how to change description/short text of network order.
so you have to select all orders from caufv whith pronr<>space an then change text with bapi above.
Regards,
Christian

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Please explain to me why the glass and digitizer have to be replaced together ?

I do not understand why the glass and digitizer have to be replaced together. My Ipad works fine with cracked glass, so the digitizer must be perfectly fine. Why can't I just replace the glass ? Please explain to me the mechanical function of the digitizer and glass connection ?

Apple doesn't repair your iPad in any case. They'll replace it, either under warranty if the problem is a defect or for a fixed fee if the unit has been damaged. So the whys and wherefores are really irrelevant.
If you're working with a third-party repair service, get them to explain their charges and the repair they propose. Most likely the glass and digitizer are bound together and cannot be replaced separately, but I don't know for sure.
Regards.

I'm traveling to Europe (France and Lithuania) with my iPhone 5s. I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (

I'm traveling to Europe (France and Lithuania) with my iPhone 5s. I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (Apple Genius) say I must completely restore the iPhone if I replace the sim card. Still others say I cannot use a local sim card. Can you help me find the correct information? Thanks for your help.

That's a wonderful question, ssmiley67. The iPhone 5s comes unlock for international use. Many of our LTE devices are unlocked for international purposes and work upon inserting the international SIM in the device.
YosefT_VZW
Follow us on Twitter @VZWSupport

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

TS1440 A flashing question mark appeared when I started my MacBook Pro, I've tried all the suggestions and nothing has worked. How can I back up my current files so I can reinstall Mavericks?

I recently did a manual reboot after my MacBook Pro had frozen, and instead of the usual Apple and loading icon, it gave me the flashing question mark on a folder, which I've never encountered before. I looked up some possible reasons on my PC, and after reading that there's a problem with my HD I tried looking up how to back up my files so that I can do a clean reinstall of Yosemite (latest ver.). However, I've never used anything like Time Machine or anything else that could back up all my files, so it didn't sound like I could do anything about that at this point. I've also tried going into Disk Utility and attempting to repair the disk image. There was only 2 available, disk0 and the base system. I verified the base system, and told me there was nothing wrong (it didn't give me the option to repair anything either, on both available options). I don't think this is the right thing though, since my drive was called MacBook Pro HD. So basically this is the point I'm at now. Is there anything I can do that will repair my HD without erasing all my files?

I've tried all the suggestions and nothing has worked.
I verified the base system, and told me there was nothing wrong
Hold the option key on boot to see if you can select your Macintosh HD.
A flashing question mark or globe appears when you start your Mac - Apple Support
You can boot into Recovery and re-install the OS X on top of what you have. It will preserve your user data.
command R on boot.
Recovery http://support.apple.com/kb/HT4718

TS1489 My songs won't play on Windows 7 version of iTunes. Everything on my PC is up to date. Windows Media Player works fine. I followed the directions and nothing has changed. I have already tried to re-install iTunes but that hasn't worked either.

My songs won't play on Windows 7 version of iTunes. Everything on my PC is up to date. Windows Media Player works fine. I followed the directions and nothing has changed. I have already tried to re-install iTunes but that hasn't worked either. If anyone knows how to solve this problem please E-Mail me at [email protected] or reply to this message.

Itunes worked after reseting my computer to factory setting however had trouble again after syncing my iPod and iPod shuffle. Is this a coincidence or could it be the cause of the problem?

I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

My iPhone 3GS was recently stolen. I can't find the box and it has not been synced to my computer in a long time. I just use it as an iPod now. I have the IMEI

My iPhone 3GS was recently stolen. I can't find the box and it has not been synced to my computer in a long time. I just use it as an iPod now. I have the IMEI but not the serial number. Is there a way that I can get the serial number using the IMEI number. Thanks

What To Do If Your iDevice Is Lost or Stolen

TS3048 My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey is ask the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook .

My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey step show on the screen the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook before. Mouse, iphone and other bluertooth devices have no problem pairing via bluetooth. Any suggestions where to look?

I read somwhere that firefox disables certain versions of java because it might give control of your computer to other malicious websites
I think you have to go to the java website and down load the version you need and enable it in firefox's prefrences
Sorry I may be a veteran in using firefox, but I know very little since I hardly had problems with mozilla untill just very recently hope this helps

So my brother just recently joined the army and someone has stolen his iPhone how can we help him find it ?

So my brother just recently joined the army and someone has stolen his iPhone how can we help him find it ?

Only if his iPhone has Find My iPhone activated before the lost and the iPhone has Internet connection (cellular or Wi-Fi)
https://www.icloud.com/#find
Login with his Apple ID and password to track.

The "Logical AND" functoid has place holders. Replace these with appropriate links or constants.

Similar Messages

Maybe you are looking for