The logical database ADA

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Do not offer or request points. >
Where do the following fields draw their underlying data from? We need to present the logic behind the data pulled from the following structures.
KTANSW in ANLAV table (structure)
ANLCV derives its partly from table ANLC and the remaining is derived on the basis of some computation.
how does it calculate
NAFA_GJE in ANLCV
and
ANSW_GJE in ANLCV
(Real urgent. Immediate delivery of full points)

look to transaction SE36:
structure and database program SAPDBADA - (PUT ANLAV and PUT ANLCV)
hope that helps
God's blessing to you ALL!
Andreas

Similar Messages

Asset Reporting - Copying Logical Database ADA

Can you please assist with the following query? Im trying to include the following standard R3 ffields within standard R3 reports AR01 (Asset Balances) & AR18 (Depreciation Simulation):
                                Table            Field Name            Data Element
Serial Number            ANLA            SERNR                AM_SERNR
Inventory Number       ANLA            IVNR                   INVNR_ANLA
To date I have been unsuccessful in my endeavours.
I have been discussing with an ABAPer and have been discussing the creation of Z transactions to give me the information Im looking for.
Im looking for help, assistance and expertise whether the following would be recommended or even technically feasible.
·     Is it possible to copy logical database ADA to say ZADA (if yes how would I or the ABAPer go about this)?
·     Is there a way to link existing R3 reports to the new logical database
As the majority of the R3 reports appear to be linked to ADA the aim is to amend this once and not require creating lots of Z reports.
Any help you could provide would be greatly appreciated
Best regards,
Paul

Hi Paul,
this is strange, what release are you on?
I have just checked AR01 on ECC 6.0, and it offers everything you need. On the selection screen of AR01, you can add selection criteria on both Serial number and Inventory number. Plus, you can display both fields in the ALV list.
The data may be stored on table ANLA physically, but the logical database ADA is using a structure (ANLAV) instead. Both SERNR and INVNR are available in that structure. On the selection screen, you have to use the Dynamic selections button. And in the ALV list, you simply add the 2 columns, best idea wold be to save it as a variant for future use.
Anyway, logical databases can be copied in SE36, you simply have to press the Copy button The more critical issue is how to link standard reports to the new LDB. The answer is, no way. Instead, you should copy some of your favorite standard reports, and change the LDB in the copies.
But, I really do not think you need this, as ADA can provide you with the information required out of the box.
Hope that helps, points welcome
Csaba

ABAP Logical Database ADA

Hi All, I am quite familiar with Logical Databases but I need to understand the following.
1) I am using LDB ADA, but I want to use my own Selection Screen and not the default one that the LDB provides. I know I must put something in AT SELECTION-SCREEN but am unsure what.
2) Once I get the data, I want to store the data in an internal table - how do I go about doing this? If you can provide a code example that would be great.
Points for any relevant help.

Hi,
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
Logical database structures
There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
Database access programming: Once youve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
Creating your own logical database
Heres a step-by-step guide:
1) Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
2) Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
3) Youll be prompted for a short text description of your new logical database. Enter one. Youll then be prompted to specify a development class.
4) Specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you dont have to write a single line of code.
Noted point is we cant add any selection criteria thru our se38 program if you are attaching any LDB to program.Ist of no use.
If you want to change selection criteria to the existing LDB, you have to goto SE36 tcode and provide LDB name and choose "Change" mode by selecting "Selections" Radio button.
declaration of params is different compared to normal se38 program in some aspects.
PARAMETERS :p_curr LIKE bkpf-waers FOR TABLE bkpf OBLIGATORY.
this BKPF table should be one of the node in the "Structure" Radio button.
Thanks
Sivaparvathi
Please reward points if helpful.

Func Module : LDB_PROCESS and Logical Database ADA

Hi All,
How to get 'ANLB' data from logical database 'ADA' using the
function module 'LDB_PROCESS'?
Is there any other way to done this without getting into SELECTION SCREEN of this LOGICAL DATABASE?
With Thanls & Regards,
R.Nagarajan.
We can -

Hi,
Using LDB_PROCESS will made all the fields of this LDB available to you......this is the way ..you can use n number of LDB's in your program apart from the one that u mention in Program attributes....
for more details and Function call..use..
Re: How to hide the selection screen of a Logical datebase?

Adding user fieds to logical database ADA - solution?

Hi,
I have problems with adding (by append structure) my user fields (which are added to standard SAP table ANLA) to logical database ADA which is used in AM reporting.
I have found this solution:
Thru SE30 I found, that logical database ADA using view V_ANLAZ (ANLA + ANLZ tables) for selecting data from DB. So I have created append for this view with my added fields to ANLA. Then I added the same append to structure ANLAV of logical database ADA.
My added field are now selected in AM reporting!
Can this solution break some SAP functionality?
Many thanks for answer!

So probably NOT...

Problem with logical database ADA

I am trying to create query with asset values and master data fields but when trying to use logical database ADA I am getting error No component exists with the name "VALUE0". .InfoSet Cannot be Used for InfoSet Query.
Does anyone have an idea about such problem?

Hi,
The message "No component exists with the name "VALUE0"" created when you omit to edit the field group only happens if no field is assigned to a fieldgroup, it should not appear if you add at least one field to a field group.
regards Bernhard

Multiple calling logical database ADA

Hello,
I need to call logical database ADA two times in my program. I use calling logical database using LDB_PROCESS function module. I need to call LDB for depreciation areas 01 and 60. If I call second time, I get exception LDB_NOT_REENTRANT. I found, that for multiple calls of LDB, there should be LDB_PROCESS_INIT subroutine in logical database proram. In this case, program is SAPDBADA and in this program, LDB_PROCESS_INIT is missing.
Could you pls. help me, how to call ADA logical database two times?
Thanks&regards,
Jirka

The exception LDB_NOT_REENTRANT means: The logical database is not prepared to accept several successive calls within a transaction. So obviously you can't use LDB_PROCESS for your purpose.
Perhaps your goal is possible if you use a sequence of commands
GET <ldb_node_1>.
GET <ldb_node_1> LATE.
GET <ldb_node_2>.
GET <ldb_node_2> LATE.
etc...
where ldb_node_1, ldb_node_2, etc... are some nodes included in logical database ADA. As I am not familiar with this particular LDB I can't tell which nodes are required to achieve your goal.

Changing logical database ADA

Hi,
I have a requirement to change the selection screen of a report. I need to remove one field and add another field in place of it. Now the report selection screen is getting retrieved from logical database ADA. How can I achieve the addition of field in logical database. Do I need to copy the existing logical database to a new one or is there any other way of achieving this ?

Thanks for the reply Shiba. For that particular problem, the business wants to not have to use the dynamic selection, and just have KNA1-REGIO and KNB1-BUSAB as regular select options. Like I said as well, I did find DD_BUSAB which I can use for KNB1-BUSAB, but KNA1-REGIO is still a problem.
Right now I just use a CHECK statement and filter kna1-regio after the GET kna1 statement.
Thanks again,
L

One of the functional groups of the Logical Database "SDF" does not appear.

Hello,
I have a problem with the logical database "SDF". It has already defined 3 functional groups. When I select the buttom "display the contents" I can see all these groups with their owns fields.
The problem is that when I use a transaction which contains this logical database, in the dynamic selections I can only see two of the functional groups. The last one doesn't appear there and I don't know why.
How can I resolve my problem?
Thank you very much in advance.
Best Regards.

1 hour is the default timeout for "ExternalCommandTimeout". So, it could be that this one measure group's fact query is taking longer than 1 hour for the first record. You can see the query in the error messages and might like to try it out
manually. Note, a common issue is with referenced dimensions or Distinct Count when an inner join or Order By are added to the fact queries.
A simple solution might be to simply increase the ExternalCommandTimeout in the SSAS properties page. Try 7200, and if it completes in less than 2 hours, or fails after exactly 2 hours, you know this is the issue.
Richard

Are the logical database obsolete?

Hi
I read that the logical database it's obsolete, and we should use the function module LDB_PROCESS. I was used to use the logical database pnp, if i want to implement my programs in the new way, what should i change? and how could this impact in the programs?.
Thanks in advance,
Regards,
Albio.-

New Logical database is PNPCE...but still you can use the PNP logical database.
if you use HR_READ_INFOTYPE function module..no need to worry which lbd u are using

Do we have macros which we can use for the Logical Database PCH

Dear Friends
I would like to know when we are using the
Logical Database PCH .....do we have any macros
for getting latest record etc.
i.e i mean to say the macros which we use
Rp-provide-from-last in PNP logical Database
do we have same facility in PCH logical database please let me know
regards
madhuri.

hi madhuri,
we use same macro.
instead of get pernr .
in pnp here we give
GET OBJEC.
use this macro
PAP_PROVIDE_FROM_FIRST P0001 SPACE PA$BEGDA PA$ENDDA
PAP_PROVIDE_FROM_LAST P0001 SPACE PA$BEGDA PA$ENDDA.
regards,
sandeep patel
Edited by: Sandeep patel on Jul 4, 2008 1:33 PM

How to execute the logical database.

how to execute the logical database.

There are two ways of using a logical database - either by linking it with the executable program(specify the LDB name in the program attributes) or by using the function module LDB_PROCESS.
1.Data read by the logical database is passed back to the program using the interface work areas.Use GET statements in the report.
GET events are implemented internally as FORM routines.
2.If you call the logical database using the above function module, the selection screen of LDB is not displayed.It uses special subroutines called callback routines, which are called by the function module and filled with the required data.
Please refer the following link for more details.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm

What are the logical databases belongs to HR module.

Hi experts,
Please explain What are the logical databases belongs to HR module.
Thanks,
Rashmi

Hi Rashmi,
There are three LDBs in HR.
1. PNPCE or PNP
2. PCH
3. PAP
Good Luck
Om

How to read data from Logical Database ADA for more than one financia year

Hi,
I need to read data from ADA logical database and ANLCV node for current financial year 2007 and for the next 3 years 2008, 2009, 2010. When I do this using program attached below, I receive only data for one year, which is entered at the selection screen in the field BERDATUM. How should I modify my program to read ANLCV node for more then one year ? Could anybody help me ?
Kind regards,
Zbigniew Debowski
REPORT ZWRZD075.
NODES: anlav, anlcv.
START-OF-SELECTION.
GET anlav.
WRITE:/ anlav-anln1, ' ', anlav-anln2.
GET anlcv.
WRITE:/ anlcv-kansw, ' ', anlcv-knafa, ' ', anlcv-gjahr.

Hi!
Have you already tried your luck in Java Programming forum?
Regards,
Thomas

What are the logical database source (SQVI) should i use for quick viewer

Dear expert,
Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Please help.
Many Thanks.
Regards,
Karen

Hi,
Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
Between,do you have any reference/link/document on the how to use the SQV1?
Also, what the difference between SQV1 and SQ01 ?
And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer to generate the query?
Please help.
Many thanks.
KH

The logical database ADA

Similar Messages

Maybe you are looking for