The Loupe in Aperture has stopped working just filled with grey whatever I settings I give it.

Used to work fine. Am I missing something obvious here?!

Aperture 2.1.4
OS X Lion 10.7.5
That what I suspected. The loupe is one of the features that does not work well with Aperture 2 in Lion and Mt. Lion, that is a known bug.
For full compatibility with Lion and Mt. Lion you will need to update to Aperture 3. The version that is now available from the AppStore, is no longer as expensive as the earlier versions of Aperture used to be.
Regards
Léonie

Similar Messages

HT1369 While syncing between my window laptop and my iPad, the following occurs "iTune has stopped working"

While syncing between my window laptop and my iPad, the following occurs "iTune has stopped working" message came on just yesterday, 19 May 2012.
Wonder what went wrong?
can anyone offer a tip or two?
Thanks

Try this, it worked for me when nothing else did:
Perform a SoundLink® speaker reset, following these steps:
On the speaker, press and hold Mute for 10 seconds, the LEDs will flash briefly
Press Power to turn the SoundLink® speaker back on
Reconnect the device, if necessary.

I tried to start my itunes and I recieved the message that itunes has stopped working what can I do to fix it?

When I try to open up itunes I am getting the message that itunes has stopped working and then microsoft sends an error message to find a solution. What can I do to fix my itunes?

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

TS1424 i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

ITunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.

iTunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2

ITunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?

iTunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?

Hey there Warrior41,
it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
If that doesn't resolve the issue there are additional steps in the article if needed.
Thank you for using Apple Support Communities.
Regards,
Sterling

I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

The App Store search has stopped working since I updated to 8.2 on iPad

Hi
since I updated my software to 8.2 on my iPad the App Store search has stopped working but other features work on the App Store only the search option is not responding and says " the App Store is temporary unavailable please try again later "
I have turned my iPad off and on couple of times but with the same result each time.
the 8.2 update is for the new Apple watch and health app.
can any one help?

Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.
Edit

My PC is communicating with my HP C309a wirelessly, but the Hp solution Center has stopped working.

My PC (Dell XPS 9000) is communicating with my HP C309a wirelessly for printing, but the Hp solution Center has stopped working. Shouldn't I be able to use all functions wirelessly?
I'm getting an error message "HP Solution Center cannot run because your device installation is not complete. Please plug in the usb cable or re-run the set-up program from the instattation CD for a network installation." When I put the installation disk in to remedy the problem, it tells me that my present software is the latest so it won't update. When I go to the update center, it tells me I have the latest software.
This question was solved.
View Solution.

Hi,
Try these:
Click Start Menu icon>Programs>HP>HP Photosmart c309a>Add a Device
With this, it will find the wireless printer and reconfigure the settings; simply follow the prompts. After completion, try to reopen HP Solution Center.
Kiko

HT1430 I would like to reset the iphone but the sleep wake button has stopped working

how to reset the phone without erasing my data when the sleep wake button has stopped working. the phone is frozen

"Why didn't iCare staff which is Apple's do something..."
They did. They told you what you should do to get the problem resolve. Too, "iCare" is an AASP and provides service for Apple's products, but the staff is not employed by Apple. It's not an "Apple Store".

Keep getting the message that iTunes has stopped working

Keep getting the message that iTunes has stopped working. Cannot contact the store to do anything

Ahhh, a number of anti-virus programs have issues with programs that use libraries that may look like virus signatures. Hardware damage can cause software problems in programs open when the hardware problem occurs by causing electrical impulses that destroy parts of the software. The short answer is it would be a good idea to have a really good technician make sure the computer is correct and then transfer the content of the hard drive to a clean hard drive and reinstall programs that don't pass checksum tests.
The total of what you say is a system that could use a careful going over...make sure you are working from a stable and solid base.

Using iMovie and the voice over sound has stopped working?

Using iMovie and the voice over sound has stopped working?

Are these the internal speakers?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Why is showing the message that Photoshop has stopped working? Then the program closes alone

Why is showing the message that Photoshop has stopped working? Then the program closes alone
I bought the program today and does't work

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

The home/menu button has stopped working on my E52...

The home/menu button has stopped working on my E52. Is there a way I can retreive the info on my phone and put it on the memory card or a pc?

Hi EmmaBarham,
Welcome to Nokia Discussions.
Please connect your phone to Nokia Suite, once connected you'll be able to sync your phone's data to your PC.
When you're done syncing the data, I would also advice making a back up via Tools>Back up. This way you can get your phone repaired and simply restore it back onto the phone via Tools > Restore in Nokia Suite once the phone has been fixed.
You can find your nearest Nokia Care Point here. Let me know how you get on!
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

The Loupe in Aperture has stopped working just filled with grey whatever I settings I give it.

Similar Messages

Maybe you are looking for