The lovely error -36

Help! I looked at the FAQ on the apple site for the error 36, but I still can't get my ipod to sync with my computer. Things were going fine, but all of a sudden, it freaked out and stopped uploading songs from my library (most are from cds I've imported songs from). I don't have a 2.0 USB port, but this wasn't a problem previously. I updated the software, and deleted what I thought might be a corrupted file, and it uploaded 2 more songs before giving me the error again. Do I REALLY have to totally do a reinstall of the software? And if I do, does this mean it will erase my library of music on the computer or JUST on the ipod? Please help - this is for a birthday gift that's 3 weeks away...

I didn't receive a "-36" error but I did encounter a problem wherein I could no longer read/write to my iPod. It turns out that every time the sync would fail it was always the same music track(s) where the sync would seize up. I couldn't simply uncheck the titles that caused problems, but had to delete the song that preceded the sync failure from my library entirely. You have to keep watching what the iPod is actually trying to copy or read at the time the error occurs. If its always the same place, you might have a corrupt file or incompatible file format as the support document mentions. Too bad Apple didn't put this little FYI in their tutorial or user manual!

Similar Messages

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
TMI?
GB

Starting Firefox I get the "Send Error Report" popup window. It states "firefox.exe has encountered a problem and needs to close."

This just started today. Everything seems fine. I just push the popup off to the side and continue to use the browser. If I were to click on the, "Send Error Report" or the "Don't Send" buttons then Firefox just closes!
Strangest thing yet, trying to figure it out!
Oh, I tried the reboot without add-ons! Even did the reinstall, still the same???

Just got back online, still working on things, BUT ???
I went back and dumped Norton's which I get for free from Comcast. I downloaded the AVG scanner. Went through all the bells & whistles and things seem ok ???? But I haven't done the reboot yet, so will do that soon. But I wanted to drop a line here and let you all know what is happening.
And Thanks Fred, the funny thing was it did seem to have something to do with their update??? I do like Norton's but my son uses this AVG and he said it was better, lol!!! But again, everyone has their favorite!
Mine is Norton's so once I confirm that everything is good, I'm going to try redoing Norton's and I'll try your suggestions, if they don't fix it!!
Thanks again, and will let you know if this is the fixed!!!

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Error Posting IDOC: need help in understanding the following error

Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!

Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash

Overflow in the operation:= error

Hi,
I get the following error in my DTP of a process chain:
Runtime error while executing rule -> see long text
Diagnosis
An error occurred while executing the transformation rule:
The actual error message:
Overflow in the operation :=
The error was triggered at the following program location:
System Response
Processing of this data record was cancelled
This issue seems to be because of the length of the target field being lesser than the source field.
Can you please let me know how this issue can be resolved since the DTP is added in a process chain?
Thanks in advance.

Hi,
As long as without knowing exact infoobject not easy to suggest direct solution.
Assuming as your loading data from PSA to Cube.
Go to your transformations, Menu Extras--> tabular overview, compare each source and target object length, need to be the same.
if any target object length is lesser than source field , that length need to increased.
Thanks

Getting the following error while creating a new configuration

Hi team,
I am trying to create configuration of my web dynpro application. When
I right click on my application and choose create/change configuration,
browser started. Now when I give a name ( e.g zabc) to it and choose the
function create, the following error occurs... Can you please give me
suggestion to overcome it
Error when processing your request
What has happened?
The URL https://gsdcb261.in.ibm.com:8443/sap/bc/webdynpro/sap/zims_issue/ was not called due to an error.
Note
The following error text was processed in the system SD4 : Screen output without connection to user.
The error occurred on the application server gsdcb261_SD4_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_APPL_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_COMPONENTCONTROLLER~UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SD4 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server gsdcb261_SD4_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server gsdcb261_SD4_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 100 -u: AGAURAV -l: E -s: SD4 -i: gsdcb261_SD4_01 -w: 0 -d: 20070426 -t: 200845 -v: RABAX_STATE -e: DYNPRO_SEND_IN_BACKGROUND
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello Thomas,
I am sorry but I haven't check this forum in the last weeks because of lack of time. Thanks for your hint regarding a potential solution. Taking a look a the note I have some problem in "using" it.
This note contains a number of potential solutions regarding our problem.
Solution 1.) one could use the modification as described. Surprising to read that SAP is saying: do a modification to solve the problem. => this is only possible "manually" I am not sure If I will follow this approach
Solution 2.) Change the URL: This solution scenario I do not understand. The solution path is "very" short and not very instructive. This is the story:
You can do this by adding "_OLD" to the name of the application of the URL created for the configuration: Use "CONFIGURE_APPLICATION_OLD" instead of "CONFIGURE_APPLICATION"
and "CONFIGURE_COMPONENT_OLD" instead of "CONFIGURE_COMPONENT". If you want to use this function as your standard, you have to change the original application. To do this, set the parameter "OLD_TR" to "X".
This solution path is "to short". I do not get the "message" what to do.
Furthermore: Does that mean you have to use this peculiar solution any time durnig software development of webdynpro components using configurations? In my opinion yes. This is therefore only a "workaround solution" and nothing else.
And there can I find this parameter "old_tr" they are talking about?
Sap note 1060287 is the "same" kind (Symptom of this note:
If you use the configuration editor, there may be errors during transport handling or
DYNPRO_SEND_IN_BACKGROUND crashes.).
Here they are saying:
"Solution
A final solution will be provided for Release 7.0 BASIS Support Package 13."
So in SP13 there seems to be a solution (I haven't found up to now the corresponding note). But does that now mean I must implement the complete support package?
So I am sorry: No progress on my side up to now. May be you have had some success?
With best regards
Christoph

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Component level display of the Custom Error Message in 11g

Iam using custom error handler that extends the default DCErrorHandlerImpl class to handle the Custom exceptions thrown from the service layer, and able to see the exception displayed in the ADF UI in a popup window.
How can we do Customization in order to display the Custom error message inline with a component (i.e. associated with a specific UI component with the arrow mark look and feel ) instead of the global level message displayed as a pop up window on the ADF UI page? Please suggest.
Thanks,
Kayal.
Edited by: user11217416 on Feb 15, 2012 6:07 AM
Edited by: user11217416 on Feb 15, 2012 6:14 AM

Hi,
Try as follows
final static int MSG_FATAL = 1;
final static int MSG_ERROR = 2;
final static int MSG_WARN = 3;
final static int MSG_INFO = 4;
      public static void showMsgForRelevantComponentAll(int iSeverity, String sMsg, UIComponent uIComponent) {
          FacesMessage msg = null;
          switch (iSeverity) {
          case MSG_FATAL:
              msg = new FacesMessage(FacesMessage.SEVERITY_FATAL, null, sMsg);
              break;
          case MSG_ERROR:
              msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, sMsg);
              break;
          case MSG_WARN:
              msg = new FacesMessage(FacesMessage.SEVERITY_WARN, null, sMsg);
              break;
          case MSG_INFO:
          default:
              msg = new FacesMessage(FacesMessage.SEVERITY_INFO, null, sMsg);
          FacesContext facesContext = FacesContext.getCurrentInstance();
          facesContext.addMessage(uIComponent.getClientId(facesContext), msg);
      }

The custom error message in the bank application is displaying in English

Hello Team,
The custom error message for a blank institution number in the bank application is displaying in English when the user is logged in French. See attached screen shot.
ESS --> Personal Information --> Bank Information.
Could any one let me know the procedure in solving the error. Helpful answer is highly appreciated.
Thanks,
Sankar

Hi,
sandip is correct, go to SE11 Table T100.
I did it this way: Searched for (in my case) SPRSL = DE and TEXT = "Bitte Bankschlüssel eingeben" (that's the said error message). With the upcoming result I got the message ID and message Number, these are:
ARBGB = 'AR' MSGNR = '195'
ARBGR = '1J' MSGNR ='510'
Maintain them for your SPRSL and you should be fine.
regards, Lukas

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELP

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

"The Application was unable to start correctly (0xc000007b). Click OK to close the application" error when starting Visual Studio Community

Hi,
I just installed Visual Studio and when I launch it, the following error pops up: "The Application was unable to start correctly (0xc000007b). Click OK to close the application". I tried searching online but no usable results. Please help!
jd

Hi,
There is not enough information about the problem. For troubleshooting, I recommend you can use Process Monitor to detect whether there's any process failed.
You can download Process Monitor and see how to use it for troubleshooting in below links:
http://support.microsoft.com/kb/939896
http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
There are a lot of log entries in Process Monitor, you may filter Visual Studio process only(proces = devenv.exe). And you can upload the logs to OneDrive so that we can investigate them.
Also, you can refer to Gfazil's post in
https://social.msdn.microsoft.com/Forums/vstudio/en-US/96035692-9a50-40d4-a7d3-48bda87d11ec/the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application-when?forum=vssetup
Please try the method he mentioned to see whether the problem can occur:
" Replacing the dlls mentioned below from a machine that is working solves the problem:
c:\Windows\SysWOW64\msvcp100.dll
c:\Windows\SysWOW64\msvcp100d.dll
c:\Windows\SysWOW64\msvcr100.dll
c:\Windows\SysWOW64\msvcr100_clr0400.dll
c:\Windows\SysWOW64\msvcr100d.dll "
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Getting the following error while parsing the values usng xml parser

Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
     IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
     THEN
     FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
     XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
     -- PARSE INPUT FILE
     FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
     XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
     -- GET DOCUMENT
     DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
     LOAD_SUPP(doc);
     ELSE
     DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
     END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
     ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
Ajesh

Besides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers

Installing SharePoint 2013 in a Windows 2012 R2 Server I was getting the following error

when I install prerequisiteinstaller.exe in sharepoint 2013, got the below error:
Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
Any expert please help?

Hi,
From your description, I know you get error when you install SharePoint 2013 in Windows Server 2012 R2.
If you have tried all method above. In your case, you have installed the Web Server(IIS), but the
Web Server (IIS) role installation may fail. You could try run commande: aspnet_regii -enable –i.
Here are similar issues:
https://social.technet.microsoft.com/Forums/office/en-US/37cc20db-6cc7-45e0-928c-9a1ddbdab2ae/the-tool-was-unable-to-install-application-server-role-web-server-iis-role?forum=sharepointadmin.
http://itrob.be/sharepoint-2013-installation-issue-the-tool-was-unable-to-install-application-server-role-web-server-iis-role/
As SharePoint 2013 does not support Windows 2012 R2 Server very well what you can find from this blog:
http://blogs.technet.com/b/wbaer/archive/2013/09/22/sharepoint-2013-support-for-windows-server-2012-r2.aspx.
Please try to refer to this article:https://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/.
Best Regards
Vincent Han
TechNet Community Support

The lovely error -36

Similar Messages

Maybe you are looking for