The macro "repoNewquery cannot be found" in SAP BW BEx

Hi,
when i attempt to open BEx analyzer, the following error message is displayed in SAP BW 3.5 NW platform.
"c:\programfiles\SAP\frontend\BW\SAPbex.xla!repoNewquery'
cannot be found.
I tried in the tool menu bar of MS excel to change the security status of the macro to the medium instead of high as was suggested in the pop up screen help. But it was of no use as i got the above error after changing .
Any suggestions folks?
Thanks,
Ravi

Go to c:\programfiles\SAP\frontend\BW.
OPen the file SAPbexc.xla.
If click "Start" button it will tell which components are not installed properly.
Check the 2 sheets PC as well as server.
One more thought : GO to control panel-Add/Remove Programs and RUN the Microsoft Office Repair.This will repair all the corrupted dlls.
Regs
Gopi
Assign points if it helps.

Similar Messages

The macro 'sapbex.xla!reponewquery' cannot be found

Hello everybody!
I am getting an error message 'The macro sapbex.xla!repoNewQuery cannot be found'. And it continues with all other icons in the BEx toolbar in excel. What should I do now?
(I have deleted all the saplogon and installed it again !
My Excel edition is 2003 and the degree of macro is low!)
your early help would be appreciated.

In your system, if Analyzer works fine for one type of user and not working for other users, that means something prevents the Auto_Open macro from running. Because of that the toolbar is not renamed and the buttons are not mapped correctly. We just want to inform you that there is no problem with
Installtion as well as Analyzer. The problem is with user login. It may be due to the settings in HKEY_CURRENT_USER.
Exd files cache activeX component information. If the component changes without removing the exd file (which created when the component is first used), then the system will be out of sync.
Go into a command prompt and type the following DOS commands:
> CD \Document And Settings
> DEL /S /A:H /A:-H *.EXD
Thanks
Ezhil

SAPinst error:- The java class is not found: com.sap.engine.offline.Offlin

Hi,
I am in the midst of Installing SOLMAN on RHEL5-ORACLE
Have installed IBM JDK version 1.4.2_10
During the CREATE SECURE STORE PHASE I am getting the following error:
sapinst_dev log file O/P
WARNING[E] 2008-06-09 18:04:43.225
 CJSlibModule::writeError_impl()
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
TRACE 2008-06-09 18:04:43.225 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2008-06-09 18:04:43.243 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 2529
TRACE 2008-06-09 18:04:43.281 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 2530
ERROR 2008-06-09 18:04:43.310 [sixxcstepexecute.cpp:951]
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
TRACE 2008-06-09 18:04:43.317 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > Oracle > Central System > Central System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS. </body></html>
TRACE 2008-06-09 18:04:43.317 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
SAPINST.LOG file O/P
WARNING 2008-06-09 18:04:43.224
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s SMD -f /sapmnt/SMD/global/security/data/SecStore.properties -k /sapmnt/SMD/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output:
The java class is not found: com.sap.engine.offline.OfflineToolStart
WARNING[E] 2008-06-09 18:04:43.225
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
ERROR 2008-06-09 18:04:43.310
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
SecurStoreCreate log O/P
The java class is not found: com.sap.engine.offline.OfflineToolStart
Pls suggest how to resolve this issue
Pls help to resolve this issue
Rgds,
Abhijeet

Hi All,
I Found the Solution.
The SAPinst tool was somehow not able to extracte the
J2EEINSTALL.SAR files from the JAVA Components DVD.
So I manually extracted the the file in the temporary install folder which the SAPinst creates in the /tmp filesystem (on LINUX by deafult) during the installation process.
The following command is used (I used this on Red Hat LINUX 5.2) to extract the J2EEINSTALL.SAR file:-
/sapmnt/SMD/exe/SAPCAR
-xvf /dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR
/sapmnt/SMD/exe/SAPCAR -->source directory of the file SAPCAR which is used to extarct CAR / SAR files on UNIX
/dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR--> destination dir. where the SAPinst tool will read and execute the file.
Rgds,
Abhijeet K

Importing CD's to iTunes fail with "The required folder cannot be found"

I have my iTunes library on an external drive. Everything works fine, except that I cannot import CD's into iTunes. When I try, I get the error "The required folder cannot be found". My work around currently is to:
1. Upfdate my preference for "iTunes Media Folder Location" to the standard location by clicking on the "Reset" button.
2. Import the CD
3. Copy the folder that it created with the songs to the correct location on the external disk
4. Update the preference or Folder Location back to my external library location
5. Double click on the first song where I get the message that it cannot be located
6. Locate it manually, and iTunes then searches for the others and fix the location.
This is extremely frustrating and impractical. I am on the very latest release and it is still happening. Does anyone know how to get around it?

I have the same problem as pyzaptys' with the exception that there is no My Music folder in the default location. I created one but the iTunes install cannot see it. I used the tweakui as suggested in the response to the original post but the app does not see the My Music folder in the special folders selections.
I have tried many angles but to no avail.
To pyzaptys: try these out:
http://www.brightsolutions.com/wagora/w-agora/view.php?site=bs&bn=bs_software&ke y=1109784889&first=1127932569&last=1022869176
http://forums.techguy.org/archive/t-402469.html

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

My laptop had to be reimaged and all software and programs were taken off. I installed itunes again but can't access my library. I get an error message "the folder itunes cannot be found or created and is required. The default location for this folder

I can't access my itunes music on my laptop after having it re-imaged. I installed itunes again but can't access the music folder. I get the following message when I click to open itunes: "The folder itunes cannot be found or created, and is required. The default location for this folder is the Music folder.
I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each. I want to sync everything -- should have close to 800 songs. Tried to get support from Apple but would be charged for help.

I have a Windows 7 operating system my computer runs from.

ITunes won't open -error: The folder "iTunes" cannot be found or created...

Hello,
I am not able to open my iTunes. I was able to use it yesterday. I keep getting the message:
*The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.*
I have created a folder called "iTunes" in my "My Music" folder, which does not fix the problem.
I have uninstalled and installed iTunes twice.
I have used the repair option when trying to install iTunes over the top of my current iTunes.
None of these options has fixed the problem.
If anyone knows how to fix this, I would really appreciate it.
Thanks!
Rachel

I found the answer on another board... Below are the parts I found useful (quoted).
Click on Start
Clin on Run
Type in "regedit" Enter
Do this step twice as there are two locations. +(I actually had 4 locations.)+
CTRL F
Type in "My Music"
Double Click and enter the path for where the folder is located.
Then exit.
The exact locations of the 2 entries that I changed are
hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
and
as above - windows - current version - explorer - USER shell folders
I located the location of my iTunes folder (something like this - C:\Documents and Settings\"yourname"\My Documents\My Music\iTunes.
I copied it, and when I found the regedit location referred to, doubleclicked the location and pasted the path in there.
http://forums.ipodlounge.com/showthread.php?s=&threadid=12125
+- Look for post by nrendle and then browse through posts from that point on...+

The folder "iTunes" cannot be found or created, and is required.

Hello,
I cannot start iTunes. When I do, I get the following error message:
The folder "iTunes" cannot be found or created, and is required. the default location for this folder is inside the "My Music" folder.
I have reviewed and gone through the recommendations for this problem, including downloading the WindowsPowerToys Tweak UI. The problem is that the Tweak UI does not know that there is a My Music special folder, so Tweak UI was of no use.
Can someone tell me what I need to do to make my Dell (Dell doesn't know either) understand that I have "My Music" folder on my computer....so it can be seen in my Tweak UI application.
Thank you.
Tim

I have followed these instructions:
If the My Music folder is in the wrong location or incorrectly assigned in the Windows registry, you may see one of the following error messages:
* "The folder iTunes is on a locked disk or you do not have write permissions for this folder."
* "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
If you see one of the above errors, follow these steps to troubleshoot this:
1. Verify the location of your Windows XP My Music folder. The default location for this folder is
C:\Documents and Settings\username\My Documents\My Music
If you do not have this folder at the default location and have not moved it to another location, consider creating one inside your My Documents folder.
2. Download and install Tweak UI from the Microsoft PowerToys website at http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx Note: This utility is for Windows XP only. Please review the system requirements before installing.
3. Once you have installed Tweak UI, open it from the Start menu.
4. In the column on the left, click on the plus symbol next to My Computer and select Special Folders.
5. In the right pane on the Folderlist, click My Music.
* This is where I run into the problem. My Music does not show up in the *
* right pane pull down set of options. *
6. Click the Change Location button. You may see a warning message appear with precautions for changing this setting; after reviewing the message, click Yes.
7. In the resulting window, browse for the My Music folder as described in step 1, and click OK.
8. Reinstall or open iTunes.

ITunes will not open - the folder itunes cannot be found or created

I'm having troubles opening up itunes. Every time i click on the icon I get the following message
The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the My music folder.
I had itunes on my hard drive but it got too full and had to transfer the library to an external hard drive. This worked for a while but suddenly stopped working with the above message. iTunes is still in my program files and all the files are still there on the external hard drive but the program wont open.
Can I change the options somehow??

hi y'all!
The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the My music folder.
the first place to start with this error message is this KB doc:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where the "My Music" folder doesn't appear in TweakUI, we've been having some success using the alternate technique in this Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem
love, b

Error: "The folder "iTunes" cannot be found or created, ..."

The full error message I am receiving is:
"The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder."
I cannot access iTunes at all. I have removed it from my computer and downloaded it several times and that has not helped. I am running on Windows XP platform.
Ideas of how to fix this??
THANKS!

I will try that when I get home. Part of the problem could be that after I installed iTunes and loaded most of my music onto my computer, my hard disk space ran out. I bought an external hard drive and transferred everything to that. iTunes still worked. I downloaded an updated version of iTunes and that is when I started receiving this message. I will try the TweakUI. If you have any more thoughts, let me know.
THANKS!
Dawn

The Folder "iTunes" cannot be found or created - ERROR!

I have been using iTunes for about five months and have loaded about 5500 songs onto it from my CDs. I've been on it A LOT! All of a sudden, it won't open and gives me this message:
The Folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
I've reinstalled the software three times, the last time even putting it on the external hard drive I'm using to store my tunes (my hard drive on my computer doesn't have room for the 25GB of songs I have so far). No luck. PLEASE help! I have lots more songs to upload before I leave the country in a few months!!!!
Thanks,
matt

hiya!
the best place to start with that error message is this document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you end up running into the complication where no "My Music" folder shows up in TweakUI, then we've had some success using the alternate technique in the following Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem
love, b

Error message The folder Itunes cannot be found or created and is required"

Help please. I get the message "The folder Itunes cannot be found or created and is required. The default location for this folder is inside the My Music folder". As a result, I cannot get Itunes to load. Have uninstalled and reloaded, repaired etc, all not working as still end up getting same message. Have also made an ITunes folder in My music, all to no avail. No viruses and virus library totally up to date. Getting to stage where I want to throw Ipod in bin and get an Iriver as its driving me insane!!

Here is a copy of the ilounge entries. I got one of my more IT literate guys to do this - but it looked easy when he did it!! important thing is it all came back - was a problem as I had moved an external hard drive so one of the locations detailed below showed the old address.
Good luck!!
Click on Start
Clin on Run
Type in "regedit" Enter
Do this step twice as there are two locations.
CTRL F
Type in "My Music"
Double Click and enter the path for where the folder is located.
The exact locations of the 2 entries that I changed are
hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
and
as above - windows - current version - explorer - USER shell folders
Try changing the two items from there - if these have already been changed then I'm not sure what to suggest.

ITunes open error: "The folder "iTunes" cannot be found or created, ..."

I have a laptop with iTunes installed. My IT guys have our LAN set up so that when I login on our LAN, all files in the "My Documents" folder are syncronized with a copy of those files on our server. When I'm connected to the LAN, iTunes starts and works just fine. I can download music, syncronize my iPod and all features work.
When I disconnect from the LAN and try to start iTunes I get the following error message:
"The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “My Music” folder."
I had the same problem on a previous laptop and solved it by putting an alias of the iTunes music folder where iTunes was looking for it. Unfortunately, I cannot get the same method to work on my new laptop. I have put aliases of various folders in many different locations hoping to trick iTunes into finding my network alias without success.
Has anyone else experienced this problem? Any solutions?
Latitude D810 Windows XP

Yes. Step 3 is the key. Thanks...
jtoons: The problem is that iTunes expects the "My
Music" folder to be both available and writable.
That's where the actual library files are stored.
When that folder is not available, you can't run
iTunes.
Since your My Documents folder is on the server, and
the default location for the My Music folder is
inside the My Documents folder, it won't work unless
you can access the server.
The solution to this is to make a local My Music
folder and configure Windows to use that one instead.
Here's how to do it:
1. Download TweakUI from Microsoft.
2. Create a new folder somewhere on your local
computer. Call it My Music.
3. IMPORTANT: Copy the contents (Not the folder
itself! Just the contents!) of the old My Music
folder in your My Documents folder into the new My
Music folder.
3. Using TweakUI, change the system's "My Music"
folder to be the new folder on your local drive.
Follow those instructions precisely and it'll work.
Skip step 3 and you make things annoyingly
complicated.

I was cleaning my macbook pro and i deleted all my files including itunes. Then when i turn on my itunes it says the folder"itunes" cannot be found or created, and is required. the default location for this folder is inside the "music" folder. help please

My itunes keep saying The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “Music” folder.iTunes needs a library to continue. You may choose an existing iTunes library or create a new one. please help i presschooseexisting cuase i have one but then it says this The file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. please help

I was cleaning my macbook pro and i deleted all my files including itunes
Restore your computer from your backup.

I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder.

I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder. All of my playlists have disappeared and I am trying to recover them however I now can't even open iTunes!

Hi crazymaiden,
I have two articles for you here that should be able to help you troubleshoot this issue with your ability to launch iTunes:
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Take care, and thanks for visiting the Apple Support Communities.
-Braden

The macro "repoNewquery cannot be found" in SAP BW BEx

Similar Messages

Maybe you are looking for