The macro 'sapbex.xla!reponewquery' cannot be found

Hello everybody!
I am getting an error message 'The macro sapbex.xla!repoNewQuery cannot be found'. And it continues with all other icons in the BEx toolbar in excel. What should I do now?
(I have deleted all the saplogon and installed it again !
My Excel edition is 2003 and the degree of macro is low!)
your early help would be appreciated.

In your system, if Analyzer works fine for one type of user and not working for other users, that means something prevents the Auto_Open macro from running. Because of that the toolbar is not renamed and the buttons are not mapped correctly. We just want to inform you that there is no problem with
Installtion as well as Analyzer. The problem is with user login. It may be due to the settings in HKEY_CURRENT_USER.
Exd files cache activeX component information. If the component changes without removing the exd file (which created when the component is first used), then the system will be out of sync.
Go into a command prompt and type the following DOS commands:
> CD \Document And Settings
> DEL /S /A:H /A:-H *.EXD
Thanks
Ezhil

Similar Messages

The macro "repoNewquery cannot be found" in SAP BW BEx

Hi,
when i attempt to open BEx analyzer, the following error message is displayed in SAP BW 3.5 NW platform.
"c:\programfiles\SAP\frontend\BW\SAPbex.xla!repoNewquery'
cannot be found.
I tried in the tool menu bar of MS excel to change the security status of the macro to the medium instead of high as was suggested in the pop up screen help. But it was of no use as i got the above error after changing .
Any suggestions folks?
Thanks,
Ravi

Go to c:\programfiles\SAP\frontend\BW.
OPen the file SAPbexc.xla.
If click "Start" button it will tell which components are not installed properly.
Check the 2 sheets PC as well as server.
One more thought : GO to control panel-Add/Remove Programs and RUN the Microsoft Office Repair.This will repair all the corrupted dlls.
Regs
Gopi
Assign points if it helps.

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

When I try to open ITunes it brings up a box that says the iTunes Library. itl file cannot be found or created. the default location for this fie is in the itunes folder in the music folder How do I solve this

My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says
The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folder.
an I cant figure out what to do to get itunes to load so I can't use itunes at all which ***** since it also means I right now I can't add music to my ipod or apps or anything. So hopefully someone can tell me what happened and how to fix it or solve it

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

"The iTunes Library.itl file cannot be found or created."

I have tried all to suggestions for moving around the old library and this is still the only thing I have gotten from the upgrade, as of yet. The message appears when trying to get into iTunes thu any source; desktop shortcut, thu the start menu, or opening the library directly in the My Music folder.
The full message reads:
"The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "My Music" folder."
I half expected a problem when i was told to upgrade, but I have got no idea how to fix this one. Any help would be great.

Will iTunes open at all or do you just get the error message and when you click 'ok' the dialog box closes?
I have successfully restored my library using the iTunes Music Library.xml file, which I figured out by messing around. If you want you can try this; note that it takes a really long time:
1. With iTunes closed open the My Music>iTunes folder (if for some reason you had iTunes set up to use a different folder look in there). Move the 'iTunes Library.itl' file out of the folder onto your desktop, but don't delete it unless this restore works.
2. Open iTunes; it should be empty. Go to File>Import. When the box opens you should be in the same iTunes folder; select the 'iTunes Music Library.xml' file.
3. The library will rebuild itself, which takes a long time (I think it took an hour when I did it and I have about 25GB), but just let it go. Don't stop the process or try to close iTunes while it's doing this. You should eventually get all your songs and playlists back, but I don't remember if playcounts restore this way; you might lose those.
4. Close iTunes - it should now save the new 'iTunes Library.itl' file. Then try opening iTunes again - hope this will work for you! If it does you can just delete the old 'iTunes Library.itl' file. If it doesn't you can move that old file back to where it was, and you'll be back to where you were before.
Normally when the iTunes library.itl file gets corrupted you can replace it with an older version from the 'Previous iTunes Library' folder, but it sounds like you've already tried that and it didn't work. If this really is a registry issue I don't know how to fix that - maybe reinstalling iTunes?
ps - I always export my library before upgrading now, because restoring from that if you have a library problem is a lot faster and it only takes a few extra seconds.
Message was edited by: meeshala

Itunes error message - the itunes library.itl file cannot be found or created

My itunes was working yesterday but today when i open it i get an error message saying "the itunes library.itl file cannot be found or created. the default location for this file in in the itunes folder in the music folder."
I have tried to reinstall itunes but still getting the same error when clicking on itunes
Please can you help?

Hold down the Shift key while trying to launch iTunes. You should see a dialog box asking you to Choose or Create a library. Click "Choose library"
Browse to the default location of your iTunes Library.itl file:
Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: \Users\username\Music\iTunes\
Windows 7: \Users\username\My Music\iTunes\
... and doubleclick the file.
Does your iTunes open for you now?

Itunes wont launch. I just installed itunes on Windows 7 PC. When i click the itunes icon the following message appears - "The itunes Library.itl file cannot be found or created..."

I just installed itunes on a Windows 7 PC. When I click on the Itunes icon the following message appears -
The Itunes Library.itl file cannot be found or created. The default location for this file is in the "Itunes" folder in the "Music" folder.
I have checked and there is a file named Library.itl in the "Music" folder. I'm not sure where to go from here so any help would be greatly appreciated.

See Empty/corrupt iTunes library after upgrade/crash.
tt2

TS1717 iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder." How can I fixt this?

iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder". How can I fix this?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. PLEASE HELP!!!

I have been trying for over 2 weeks now trying to get my iTunes to open up so I can use my iTunes but I have not had any luck since I up graded to the new itunes. I have tried uninstalling (all apple programs) and reinstalling and nothing seems to work. Everytime I try to open my iTunes I receive the following message - The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. Please help as I'm getting very frustrated and want to throw every apple device in the trash!!!
FYI: I thought about getting the iPhone but since I"m not having very good luck getting assistance with my iPod/iTunes I think I will rethink my decision.

Found the solution.

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

Anyone can help to advice how to solve this issue ?

I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open. How can I fix this?

When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

V7: "The iTunes Library.itl file cannot be found or created..."

Ok it's the second time it happens. The downloading and installing of version 7.0.1.8 went ok, but then when i first restarted my computer and tried to launch iTunes this message appeared :"The iTunes Library.itl file cannot be found or created. The default location of this file is in the iTunes folder in the MyMusic folder", and nothing else happens. Last time I got back to version 6 but my iPod requires v7! Can anyone help?

unfortunately it doesn't seem to work. the message shown in my case is slightly different, the file that cannot be found is the iTunes Library. the thing is the file IS in the right place, i.e. in MyMusic/iTunes. and when i upgraded iTunes all was working , this message first appeared the first time i rebooted my computer.

"The volume for DSC_0001.jpg cannot be found"?

I'm a bit of a novice with macs but a new problem has occurred while importing photos from my Nikon D70s to iphoto. With the majority of images, it comes up with the caution "The volume for DSC_0001.jpg cannot be found" or whichever DSC image. If I press 'cancel' it imports the photo and I can view and edit it. If I press 'OK' or 'find photo' nothing useful seems to happen.
I have tried updating iphoto but I again get an alert saying "An eligible iPhoto application was not found in the location /Applications."
Any help with both these problems would be greatly appreciated.
Cheers.

This sometimes occurs if you’re importing a file into iPhoto and there’s already a file there with the same name. Digital cameras can produce many, many files with the same name over their lifetime, so it’s not uncommon to have several files called IMG_00543.JPG, for instance. Now you want to import one also called this.
What happens is that iPhoto compares the two files to check for duplicates. However, if iPhoto cannot find the file already in the database for comparison, then you get this message. It suggests that your database is damaged because iPhoto has lost track of this (or these) similarly named files.
A simple test is to rename the file you are importing - just add a character - IMG_00543a.JPG for instance. If this then imports with no issue then you might consider rebuilding your library:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

I am locked up in slideshows, a prompt comes up "the volume for (a picture) cannot be found, how do I get out of slideshow,

I am locked up in slideshows in IPhoto, a message comes up "the volume for "some picture" cannot be found, Insert the disk or connect to the server volume and wait for it to appear on the destop, then try again." you can hit find photo, cancel (which it will not let you) or OK which does nothing, I want to delete this slideshow, or at the very least get out of slideshows, how can I do that?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when you try to view the the photos in the slideshow in full size?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

The macro 'sapbex.xla!reponewquery' cannot be found

Similar Messages

Maybe you are looking for