The Mapping to Node COMPONENTCONTROLLER.1.ATT_NAME Has Not Been Completed

Have you ever met such problem ?
It's very strange , sometime it occured and sometime not .

hi, Soman ,
I'm binding context between external component and inner component . And met the problem .
Best regards ,

Similar Messages

External Context Mapping and "The Mapping to Node...Has Not Been Completed"

Hi there,
I've got 2 components: A, B where A consumes the data provided by B.
I'm calling the component B which includes a view provided by A. This view (provided by A) needs data inputted by the user in a view in B.
The context of B contains a node called MULTIVALUES flagged as Interface + Input Element Ext.
The component A uses the component B, in the component usage interface controller of the component A I've referenced the component controller of A. I have then created a node in A's component controller and done the mapping from the component usage interface controller of A to A's component controller.
The manually created component controller node in A is NOT an interface.
Now when I invoke B I'm getting an error:
The Mapping to Node COMPONENTCONTROLLER.1.MULTIVALUES Has Not Been Completed.
What's still missing?
Thank you!

it is indeed much more complex and you need lot of understanding about the component instances and their life time.
What i do normally for such complex cyclic dependency , i try to split the common part which is needed in bot component_a and component_b and create a new super component_s.
Component_s is used in both components. You can even go further that you create view component which has nothing but the viewContainer UI elements to embed the views from component_a and Component_b.
The view component has to create all the used components (comp_s,comp_a,comp_b) and after creating call the interface method in comp_a and comp_b to set the component usage of comp_s (use the if_wd_comp_usage=>entering-referencemode).
In this way the comp_a,comp_b share the same instance of comp_s.
What i am saying is to look for a solution in application architecture and not with in the exiting components coding.

The error is " The Mapping to Node has not been completed

Hi All,
I am getting a strange type of error and need help immediately.
The error is " The Mapping to Node COMPONENTCONTROLLER.1.PLANNING_ENTITY Has Not Been Completed" for the node that exists in the Parent component and is being used in all the child nodes thru reverse mapping.
I have done mapping in all the child nodes but still the message is coming.
Could anybody tell me the reason .
Regards,
Arti.

Basically somewhere you have defined a context node 'PLANNING_ENTITY' to be an Input-Element. At the same time you did not define (through a component usage at design time) where the input to that node is coming from. This means the mapping path to the node is not complete, and the node does not know where it is mapped to.
Either:
- You untick the checkbox 'Input-Element (ext.)' inside the controller context, or
- You find the component that uses the component with the node 'PLANNING_ENTITY' and select Component_Usage->'Name of Usage'->'Add controller usage'. Inside the controller menu you see then, you can now provide a mapping to the context node.
I realise this now sounds a little confusing, but I'm happy to provide more details should you need them.
Cheers,
Robin

Access an interface node : the mapping has not been completed

Hello all,
by getting an element of interface-node within a component I get follow error message
"the mapping to node COMPONENTCONTROLLER.1.INIT_DATA" has not been completed"
Can anybody say me, what does it mean?
Some more information (in case for somebody need it):
1. I have a component A, where I have defined usage component of component B.
2. Component B has an interface node INIT_DATA, which is mapped with the node INIT_DATA of component A.
3. I set attributes of node INIT_DATA of component A and expect, that those values will be assigned to the node INIT_DATA of component B (becouse they are mapped)
4. by doing it within a component A:
lo_node = wd_context->get_child_node( name = if_componentcontroller->wdctx=>init_data).
lo_elem->get_element( ).
lo_elem->set_attribute(....).
I get this error message:
"the mapping to node COMPONENTCONTROLLER.1.INIT_DATA" has not been completed"
Please let me know, what I do wrong?
thanks in advance
Anna

Hi Anna,
You should not be having the node INIT_DATA defined separately in both components. It should be defined only in component B and marked as Interface node. Now when you define a usage of component B in component A, you will be able to see this node. You need to map this in component A by drag and drop.
Also, in the properties tab of the component controller of component A, declare the usage of component B using the F4 help. I think that should solve your problem.
Regards
Nithya

Need help in Component Mapping - "Mapping has not been completed" !

Hi Experts,
i read the SAP Galileo Press Book "Web Dynpro for ABAP" and i try in Chapter 2 some exercise for Multi-Component-Architecture.
In this Chapcter i have 2 Components "Main" and "Nations". In one of this Components i created Node´s and Attributes in the Context of Component-Controller. After this i changed to the View and tryed to mapping the Component-Controller and View.
Before i explain what i have done, i want show us the following Error:
Note
-> The following error text was processed in system FID : Adapter error in TEXT_VIEW "TV_LANDX50" of view "ZZWDC_CHAP02_NATIONS.V_NATIONS": Context binding of property TEXT cannot be resolved: The Mapping to Node COMPONENTCONTROLLER.1.T005T Has Not Been Completed.
-> The error occurred on application server fidvfid0_FID_00 and in work process 0 .
-> The termination type was: RABAX_STATE
-> The ABAP call hierarchy was:
-> Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
-> Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
-> Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP

ETN_58 wrote:
Hi Experts,
>
> i read the SAP Galileo Press Book "Web Dynpro for ABAP" and i try in Chapter 2 some exercise for Multi-Component-Architecture.
>
> In this Chapcter i have 2 Components "Main" and "Nations". In one of this Components i created Node´s and Attributes in the Context of Component-Controller. After this i changed to the View and tryed to mapping the Component-Controller and View.
>
> Before i explain what i have done, i want show us the following Error:
>
> Note
>
> -> The following error text was processed in system FID : Adapter error in TEXT_VIEW "TV_LANDX50" of view "ZZWDC_CHAP02_NATIONS.V_NATIONS": Context binding of property TEXT cannot be resolved: The Mapping to Node COMPONENTCONTROLLER.1.T005T Has Not Been Completed.
> -> The error occurred on application server fidvfid0_FID_00 and in work process 0 .
> -> The termination type was: RABAX_STATE
> -> The ABAP call hierarchy was:
> -> Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
> -> Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
> -> Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
hello,
i think you missed mapping the layout with the context attributes....check out the property of all the elements in the view, if not mapped map it by selecting the attribute from the node.
Regards,
Sahai.S

The Mapping to Node &ATTRIBUTE_NAME& Has Not Been Completed.

Hi All,
Could anybody tell me when this exception arises.
we could not track this exception as all the mappings have been done as desired.
Need help immediately.
Regards,
ARti.

Hi Aarti,
I encountered the same problem, but could resolve it.
There are two kinds of context mapping possible:
1)Cross component context mapping - In this case, the properties of the interface context node of the used component would look like:
Interface Node: X
Input Element (Ext.): must not be set
Then in the COMPONENT CONTROLLER of the using component, map the desired context node on the left hand side (of the component controller) to the interface node of the used component on the right hand side.
This is done when we need to receive value of the interface context node of the used component in the using component.
2)External context mapping: In this case, properties of the interface context node of the used component would look like:
Interface Node: X
Input Element (Ext.): X
Next in the CONTROLLER USAGE in the using component(this is a new node added in the hierarchy in SE80 when displaying the WD component, when component usage has been declared in the current component), right click the desired component usage and select 'Create controller usage'. Now it is here where you define mapping between the interface context node and the context node of the current component controller. By doing this, component controller of the using component would act as the data source.
This is done when we need to pass value to the used component from the using component.
The important point to remember is that whenever attribute Input Element (Ext.) of the interface node has been marked as X, ensure to define a mapping for this context, else it results in a runtime error "The Mapping to Node COMPONENTCONTROLLER.1.<interface_context_node> Has Not Been Completed" .
Regards,
Chitrali

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

I have tried to update the software on my ipad 2, 16GB, through itunes, but the update has not been completed and has frozen, what should I do?

I have tried to update the software on my ipad 2, 16GB, through itunes, but the update has not been completed and has frozen, what should I do?

Hey there alaili55,
Welcome to Apple Support Communities.
It sounds like you ran into an issue updating your iPad 2 with iTunes on your computer. Take a look at the article linked below and try the troubleshooting tips that it provides, which will resolve most issues updating iOS devices.
Resolve iOS update and restore errors in iTunes - Apple Support
Cheers,
-Jason

I bought the game from the iTunes process has not been completed?

I bought the game from the iTunes process has not been completed?

If you are getting a message to contact iTunes support to complete it then you can contact them via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT3702 I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DH How do I delete the restriction in iTunes

I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DHHow do I delete the restriction in iTunes

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

Can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

I'm on a PC and have uninstalled an re-installed Itunes.That sorts out Windows but knocks out the network adaptors which means i can't get onto the web! So its either no iTunes or no web it seems. I've fully updated Windows andam now scratching my head. Any ideas are welcome. Thank you

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

I updated my iPhone to ios5. Receive error message " could no activate iPhone" iTunes message says there is no SIMM in phone. The SIMM I have used all along has not been removed.

Subject:
I updated my iPhone to ios5. Receive error message " could no activate iPhone" iTunes message says there is no SIMM in phone. The SIMM I have used all along has not been removed.

I know I answered you before on this but can't find the thread. Guess you didn't like my answer. Your phone was illegally hacked to unlock it and when you updated the phone it relocked it back to the original carrier. This made the sim you had in the phone useless and therefore it cannot activate the phone. Nothing can be done in these forums to help you fix your problem as it is against the TOS to discuss illegal unlocking or jailbreaking the phone.

InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!

Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out?

Linking primary sales accounts has not been completed

Dear All
I created new database defined all account in GL-Account determination including Domestic Accounts Rec , Foreign Accounts Rec and Revenue Account I also set Realized Exchange Gain , Realized Exchange Loss, same accounting I set in Warehouses and Item Group Accounting, but when I want to run incoming payment form i am getting error "Linking primary sales accounts has not been completed" Please guide me, needy one.
Thanks

Hi Zubair,
Do this.
Go to G/L account determination - >Sales->General->MAP this
Domestic Accounts Receivable
Foreign Accounts Receivable
Revenue Account
You may also check this:
linking primary sales account not complete
The last point of this thread.
Thanks,
Joseph
Edited by: Joseph Antony on Jul 15, 2010 1:30 PM

The Mapping to Node COMPONENTCONTROLLER.1.ATT_NAME Has Not Been Completed

Similar Messages

Maybe you are looking for