The MassCompile vi is broken when applying the known fix for Error 1052

There is a fix given in the Discussion Forum for Error 1052 (see Document ID 1RABSOBH)
(The fix is to rename the Open/Create/Replace File.vi to OpenCreateReplaceFile.vi)
Unfortunately when I apply this fix it breaks the built in LabView Mass Compile vi which cannot be updated as this vi is password protected.
I then can't use this Mass Compile tool to update all the vi's used in my TestStand sequences to point to the newly named OpenCreateReplaceFile.vi
Could you give the password for this built in LabView vi or better still, is there a fixed Mass Compile.vi available?
Thanks,
David

Hi David2004
You have to rename your VI while all the calling VIs are open (for this, open the main VI).
Then change the name
Then save the modifications
Then it will work.
Cheers.
Doc-Doc
It would be nice if you take the time to rate this answer
http://www.machinevision.ch

Similar Messages

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

I have a LaserJet Pro P1606dn - the second page prints upside down when using the duplex print optio

Operating system Windows 7 32 bit. I have re-installed the printer an I have downloaded and applied the most recent drivers from the HP site. The built in set-up shows the settings correctly as duplex on and bind on the long edge but the second page continues to print upside down i.e. it seems to always print as binding on the top edge.
However when I print from my iPad via Airprint the duplex print works perfectly!

IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
Walt

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

Hello, okay? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowe

Hello, how are you? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowered any other game and not upgraded the already downloaded. I do not know what exactly I have to do, because if informed a new payment method continues with the same problem, checked the card bill and really had given an error, because there was no billed the game. I ask you to verify what happened and explain to me what I need to do, because my single card is Visa's and do not intend to return others to use the services of the App Store.
Thank you for understanding.

I think you need the app store support. http://www.apple.com/support/mac/app-store/contact/ Go there and use one of the methods to contact them about your issue and they should be able to help you out.
This forum isn't checked by Apple employees but is for users to help each other out.
Phil

In IPhoto 11 I have made an album and rearrange the photos in the order I require them. When export the album to allow me to burn them to disk to be viewed in Windows they do not maintain the same order. What am I doing wrong?

In IPhoto 11 I have made an album and rearrange the photosin the order I require them. When export the album to allow me to burn them todisk to be viewed in Windows they do not maintain the same order. What am I doingwrong?

When you sort the Album in iphoto are you sorting manually? Or by date of the photos?
When you sort in the Finder how are are you sorting?
Here's one way to do what you're trying to do:
Create your Album and sort the pics as you want them. Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the Finder and you end up with a folder full of images in the same order as the Album in iPhoto.
Regards
TD

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature b

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature be returned?

No one knows if the interactive dialog will return, except adobe and adobe is not saying.
What operating system are you using?
On windows there is a way to get it back, but not if your using a mac.

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

"The FAST Search backend reported warnings when processing the item." for XLSX

Hi,
i am running an FAST for Sharepoint 2010 for development purpose. I can index DOCX files successfully, but for XLSX files i get the following error:
"The FAST Search backend reported warnings when processing the item. ( Document conversion failed: LoadIFilter() failed: No IFilter registered for the extension '.xlsx' (0x80004005)"
What is wrong here?
Best regards,
Yavuz B.
My Sharepoint and Enterprise 2.0 Blog http://www.bogazci.com |
Microsoft Sharepoint Resources & Blog List

Check if Microsoft Filter Pack 2.0 and the latest Service Pack for Filter Pack is installed.
Sometimes it´s not installed with the Prerequisities.
Tomas Andersson

Does the retina display help your eyes when on the computer?

Does the retina display help your eyes when on the computer for a long period of time? Does it make a difference if you have eye problems?

First, I'd suggest posting your question on the MacBook Pro forum. This is the Mac Pro forum, where the computers start at 50 pounds and go up from there (at least so far).
Second, I think it depends on what your eye problems are. I can say that there's a lot less reflection off the screen than the standard MacBook Pro glossy screen; it's similar to the anti-glare screens that you can find on other Mac laptops. The Retina display also has the ability to present a much crisper image with compatible software.

How do u clean the ear piece, can't hear when on the phone with someone

How do u clean the ear piece can't hear when on the phone with someone

When you're calling them is your phoned muted by any chance?

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

How do i change the "profile" picture on m iPad when I'm using iMessenger for IOS5?

How do i change the "profile" picture on m iPad when I'm using iMessenger for IOS5?

You do realize that only you see the photo associated with this correct - nobody else will see your photo - only you will.
You have to add the photo in the contacts app. Locate your vcard and tap Edit. Then tap the area where the photo will be located to add a photo. You can take a photo or choose one from your photos app.

When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500a

This is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means.

The MassCompil​e vi is broken when applying the known fix for Error 1052

Similar Messages

Maybe you are looking for

The MassCompile vi is broken when applying the known fix for Error 1052