The material 332-369090-00 does not exist or not activated

Hi Experts,
Kindly Look at into this error which I am facing in the PRD system.
Materials listed below doesn't exist (or) not activated in the Source system.
1. The material 332-369090-00 does not exist or not activated
2. The material 410-051003 does not exist or not activated
2LIS_02_SCL-Purchasing Data (Schedule Line Level) -
This data source is going to the below data targets.
1. Purchasing Data - ZPUR_C01
2. Purchasing Groups - ZPUR_C04
3. Backlogged Purchase Order Schedule Lines ZPUR_C10
Like this no of materials available in BWPRD but not available in R/3 PRD source system .so how to delete specific master data records for material
Regards
Pinky
Edited by: pinky reddy on Jul 27, 2009 2:09 PM
Edited by: pinky reddy on Jul 27, 2009 2:09 PM

Easiest way to solve this is to check the mara table in R/3. try and find your material there. If its not there, then it either has been manually created or loaded from a different source system. Check all the source systems if anyone has loaded them. Then check your cubes and ODSs if you can find any transactional data for these materials. If yes, then there is a possiblity that maybe it was created to correct a failed load. You should then identify the document and compare the same on in R/3.
If this material is used in any transaction data, then you can simply delete it. RSA1-> Find the infoobject(characteristic)-> Maintain master data-> Give the material nos-> select the row and press the delete button.
Regards.

Similar Messages

MATERIAL DOES NOT EXISTS OR NOT ACTIVATED

Dear Experts,
I want to change Material Master data. I have downloaded the material list from data base table MARC plant data for materials.
i want to extend the material master view. but system is issuing the error message - Material dose not exists or not activated. Also it is not showing the material in MM03 & MM60.
But in data base table MARC it is showing the material code with details.

Hi Kiran,
The material type must be HAWA, well you would be able to get this info, if an entry in MARA exists. So from where are you getting the material type?
Anyways just check this, enter the material nos. in MM01 & select Basic Data 1 & click create, check what message you get, should provide you the clues. Also check how this material was created. It could be possible that it was created via some custom program.
Creat the view & then you will be able to resolve the issue. Check the above & revert if you face any issues.
Regards,
Vivek

Returning the material to Vendor after doing MIRO

Hi Freinds,
               I have a scenario. Please help me out.
I have sent a PO to a vendor & accordingly the vendor has supplied the material. Then after doing MIGO & MIRO, I realised that some materials are defective.
               So I have to return the material to the same vendor. How it can be done?
Waiting for your response.
With Regards
Saeed Arif

If Excisable Material and Complete quantity return -
                                1) Cancelation of MIGO document(MBST)(MOV-102)
                                2) Do Excise posting again with reference to Vendor Excise invoice(J1IEX)
                                3) Cancel Excise Invoice (J1IEX)
                                4) Cancel Invoice document(MR8M).
If it is partial quantity
                                1) MIGO (MOV-122)
                                2) MIRO (Credit Memo).
Regards,
eswarmanu...
Edited by: eswar manu on Oct 21, 2008 11:41 AM

This week, Apple advertised AmpliTube Fender in Time Magazine, but I cannot find it in the Apple App Store. Does it exist?

This week, Apple advertised AmpliTube Fender in Time Magazine, but I cannot find it in the Apple App Store. Does it exist?

See here for more info... AmpiTube Fender for iPhone
tt2

I go to download an app but when i go to hit the price/free button it does nothing and will not let me continue to download...how do i fix this?

I go to download an app but when i go to hit the price/free button it does nothing and will not let me continue to download...how do i fix this?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
Willow37 wrote:
I no longer have this email account and do not remember the password associated with it. What do I do?
If necessary...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

My iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

my iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

5.0.2 has not been released, thus you can not upgrade.
Stedman

Not existing can not be inserted

Dear Experts,
I am getting an error message if I am trying to change Purchase Requisition.
There are additional inserted item in the new tbale 'LT_BAPI_NEW'.
In the table 'LT_BAPI_OLD' are only two items. What is wrong there ?
I have thought with this FM it is really possible to change a PReq.
What can I do in this case ?
The item 00030 is not existing can not be inserted.
CALL FUNCTION 'BAPI_REQUISITION_CHANGE'
      DESTINATION av_rfc_dest
      EXPORTING
        NUMBER                           = '1000115373'
      TABLES
        REQUISITION_ITEMS_OLD   = LT_BAPI_OLD
        REQUISITION_ITEMS_NEW = LT_BAPI_NEW
        RETURN                             = LT_BAPIRETURN
      EXCEPTIONS
        OTHERS                = 1.
Friendly Regards
ertas

Hi,
Refer to this link..[Help me about BAPI_REQUISITION_CHANGE!!!|Help me about BAPI_REQUISITION_CHANGE!!!]

RSPC Variant does not exist - Could not find or load print parameters

We are on BI 7.0 (support pack SAPKW70017). We recently freshed test system from production.   After the refresh, we have problems opening all the process chains.
1. When I go to RSPC to open a process chain, I get many messages like this:
Variant &0000000067180 does not exist (there are different variant numbers)
Message no. DB612
Diagnosis
You selected variant &0000000067180 for program RSPROCESS.
This variant does not exist.
2. When I go to SM21 to check the system log, it displays many entries like below:
EJ F Could not find or load print parameters for step 1, job BI_PROCESS_TRIGGER/09134500
Documentation for system log message EJ F :
An error occurred during loading of the print parameters for a
background job step.
The print parameter record may have been deleted even though there was
a still a step that needed that data. This is an error as the
reorganization of the print parameters should prevent this from
happening.
To fix the problem, edit the step and save it, copy the job, or
schedule a new job. The print parameters will be regenerated in all
these cases.
3. I applied the OSS note 1169659 - Correction: Process variants not entered by BDLS.   The Basis rerun BDLS. But it did not fix the problem.
Would appreciate if someone could provide any help.
Thank you.

Hi Rebecca.
1) Please verify if exist process types called 'unknown job'. If exist: delete process types called 'unknown job' in your process chain. To do that please remove the chain from scheduling (menu bar > process chain > remove from schedule), afterwards switch the detail view on (menu bar > view) > right mouse click on the process type "unknown job" > displaying scheduled jobs > delete that job. After deletion of the 'unknown jobs' activate and schedule your process chain again.
2) After the removal of the 'unknown jobs' please check if the error messages with the missing variants pop up when calling your process chain disappears. If not, please implement and execute the attached report Z_FIND_JOBS_WITHOUT_VARIANT which deletes the jobs without variants.
I have already attached report as Report Z_FIND_JOBS_WITHOUT_VARIANT, you can download and create the report accordingly.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
REPORT Z_FIND_JOBS_WITHOUT_VARIANT.
data: l_t_job type table of tbtcp with header line,
      l_s_varsel    TYPE rsvar,
      l_t_variant   TYPE TABLE OF rsparams.
parameters: delete type rs_bool.
select * from tbtcp as job into table l_t_job
                    where progname = 'RSPROCESS'
                    and   exists ( select * from tbtco
                          where jobname = job~jobname
                          and   jobcount = job~jobcount
                          and   status = 'S' ).
loop at l_t_job.
l_s_varsel-report = l_t_job-progname.
l_s_varsel-variant = l_t_job-variant.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report               = l_s_varsel-report
      variant              = l_s_varsel-variant
      execute_direct       = 'X'
    TABLES
      valutab              = l_t_variant
    EXCEPTIONS
      variant_non_existent = 1
      variant_obsolete     = 2
      OTHERS               = 3.
if sy-subrc <> 0.
    write: / l_t_job-jobname, l_t_job-jobcount.
    if delete = 'X'.
      CALL FUNCTION 'BP_JOB_DELETE'
        EXPORTING
          JOBCOUNT = l_t_job-jobcount
          JOBNAME = l_t_job-jobname
        EXCEPTIONS
          OTHERS   = 1.
      IF SY-SUBRC <> 0.
        write 'not deleted'.
      else.
        write 'successfully deleted'.
      ENDIF.
    endif.
endif.
endloop.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I hope I can be helpful.
Thanks,
Walter Oliveira.

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Asm diskgroup does not exist or not mounted

Hi,
iam have configured a 2 node cluster and now when i rebooted and again started my rac database so all the applications are offline so i stop them with crs_stop and then restarted but my databases asm and instance service is not up so in that case i tried to connect to database or to instance but i was not able to so then i thought of connecting to asm instance and then the status is as follows
SQL> select name ,state ,mount_status from v$asm_disk ;
NAME STATE MOUNT_S
NORMAL CLOSED
NORMAL CLOSED
FG_0000 NORMAL CACHED
SQL> alter database open ;
alter database open
ERROR at line 1:
ORA-15000: command disallowed by current instance type
SQL> alter diskgroup all mount ;
alter diskgroup all mount
ERROR at line 1:
ORA-15032: not all alterations performed
ORA-15130: diskgroup "DG1" is being dismounted
ORA-15066: offlining disk "DG1_0001" may result in a data loss
SQL>
SQL>
so in that cse the contents are as follows
on Jul 11 21:58:46 2011
Dirty detach reconfiguration started (old inc 2, new inc 2)
List of nodes:
0 1
Global Resource Directory partially frozen for dirty detach
* dirty detach - domain 1 invalid = TRUE
0 GCS resources traversed, 0 cancelled
Dirty Detach Reconfiguration complete
Mon Jul 11 21:58:46 2011
freeing rdom 1
Mon Jul 11 21:58:47 2011
WARNING: dirty detached from domain 1
Mon Jul 11 21:58:47 2011
ERROR: diskgroup DG1 was not mounted
Mon Jul 11 21:58:47 2011
WARNING: PST-initiated MANDATORY DISMOUNT of group DG1 not performed - group not mounted
Mon Jul 11 21:58:47 2011
Errors in file /u01/app/oracle/admin/+ASM/bdump/+asm1_b000_18030.trc:
ORA-15001: diskgroup "DG1" does not exist or is not mounted
ORA-15001: diskgroup "DG1" does not exist or is not mounted
so iam not able to figure out please help me in solving this
Thanks in Advance
Regards
Kavita

Hi,
Sir i wait for many times but the major issue is iam facing that all aplications when i start my machine are offline or unknown........ then when i exec crsctl stop crs and crsctl start crs i wait a lot and then i exec crrs_stat t that time all applications are either unknown or offline............ then i stop forcily all applications which are unknown finally bring all to offline status and then restart but in this case i exec srvctl start nodeapps - n rac1 and nrac2 these things work but tried with database or service or instnace that ownt work it give me the following error
and then i sart instance or database through sqlplus and if i do any transcations then i get the follwoing error .........
PRKP-1001 : Error starting instance devdb1 on node rac1
CRS-0215: Could not start resource 'ora.devdb.devdb1.inst'
and now if iam trying to start my asm instance iam have already posted through what iam getting and this i have tried for 2 diffemt 2 node cluster but facing the same issue
2011-07-12 22:02:02.500: [ CRSRES][3772144560]0startRunnable: setting CLI values
2011-07-12 22:02:03.235: [ CRSRES][3772144560]0Attempting to start `ora.prod1.LISTENER_PROD1.lsnr` on member `prod1`
2011-07-12 22:02:06.197: [ CRSRES][3772144560]0Start of `ora.prod1.LISTENER_PROD1.lsnr` on member `prod1` succeeded.
Sir this from
(0x8364680) pid() proto(10:2:1:1)
[    CSSD]2011-07-12 22:46:09.669 [91069360] >TRACE: clssgmClientConnectMsg: Connect from con(0x8350880) proc(0x8364680) pid() proto(10:2:1:1)
[    CSSD]2011-07-12 22:47:03.826 [91069360] >TRACE: clssgmClientConnectMsg: Connect from con(0x8352a08) proc(0x8364680) pid() proto(10:2:1:1)
[    CSSD]2011-07-12 22:47:04.385 [91069360] >TRACE: clssgmClientConnectMsg: Connect from con(0x835bf18) proc(0x835ed88) pid() proto(10:2:1:1)
[    CSSD]2011-07-12 22:47:17.938 [91069360] >TRACE: clssgmClientConnectMsg: Connect from con(0x835bf18) proc(0x8364680) pid() proto(10:2:1:1)
[    CSSD]2011-07-12 22:48:27.641 [91069360] >TRACE: clssgmClientConnectMsg: Connect from con(0x8350880) proc(0x8364680) pid() proto(10:2:1:1)
Thanks in Advance
Regards
Kavita

Does directory exist or not?

ASM 10.2.0.3 on RHEL4. I am trying to clean up a database.
ASMCMD> cd FRA/RACTEST/BACKUPSET/2007_07_27
ASMCMD> ls
annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904
annnf0_BACKUP_RACTEST_000_0727070220_0.369.62904
annnf0_BACKUP_RACTEST_RAC_0727070314_0.380.62904
annnf0_BACKUP_RACTEST_RAC_0727070314_0.381.62904
nnndn0_BACKUP_RACTEST_000_0727070220_0.363.62904
nnndn0_BACKUP_RACTEST_000_0727070220_0.364.62904
nnndn0_BACKUP_RACTEST_RAC_0727070314_0.375.62904
nnndn0_BACKUP_RACTEST_RAC_0727070314_0.376.62904
ASMCMD> rm -rf *
ORA-15032: not all alterations performed
ORA-15173: entry 'nnndn0_BACKUP_RACTEST_000_0727070220_0.363.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'nnndn0_BACKUP_RACTEST_000_0727070220_0.364.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'annnf0_BACKUP_RACTEST_000_0727070220_0.369.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'nnndn0_BACKUP_RACTEST_RAC_0727070314_0.375.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'nnndn0_BACKUP_RACTEST_RAC_0727070314_0.376.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'annnf0_BACKUP_RACTEST_RAC_0727070314_0.380.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15173: entry 'annnf0_BACKUP_RACTEST_RAC_0727070314_0.381.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ASMCMD> exitWhy would "ls" show the files, but "rm" says they do not exist? I did not find any hits on Metalink, and google came back with more questions than answers.

ASMCMD> ls
annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904
annnf0_BACKUP_RACTEST_000_0727070220_0.369.62904
annnf0_BACKUP_RACTEST_RAC_0727070314_0.380.62904
annnf0_BACKUP_RACTEST_RAC_0727070314_0.381.62904
nnndn0_BACKUP_RACTEST_000_0727070220_0.363.62904
nnndn0_BACKUP_RACTEST_000_0727070220_0.364.62904
nnndn0_BACKUP_RACTEST_RAC_0727070314_0.375.62904
nnndn0_BACKUP_RACTEST_RAC_0727070314_0.376.62904
ASMCMD> rm annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904
ORA-15032: not all alterations performed
ORA-15173: entry 'annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904' does not exist in directory '2007_07_27' (DBD ERROR: OCIStmtExecute)
ASMCMD> rmalias annnf0_BACKUP_RACTEST_000_0727070220_0.368.62904
ORA-15032: not all alterations performed
ORA-15177: cannot operate on system aliases (DBD ERROR: OCIStmtExecute)

Boot device not found. "Hard disk not exist". windows not booting

Product: HP G72-110SA
OS: Win7
two days ago, I was installing updates on my computer and when it was about to restart, it froze. After waiting for 10 minutes, I had to turn it off by pressing the off button. From then on, the computer turns on but shows a message "Boot device not found".
I have tried all the BIOS tests that I could find on the net for the hard disk, eg: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443465&tmp_task=solveCategory&cc=uk&dlc=en&la...
This gives me a "Hard disk not exist" error. I tried resetting the BIOS, that didn't work. I tried taking out and putting back in the battery, the memory and the hard disk. Still no luck.
I then booted ubuntu from cd on the computer. It works just fine, including the internet etc EXCEPT the HDD is still not detected.
I had some pretty important stuff and no back up, so would appreciate if someone can help me get back the data. If not, even if I know its just a HDD failure and not a motherboard/BIOS problem, it will be a relief as its probably fixable.
Thanks

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number. (How Do I Find My Model Number or Product Number?) When I went to www.hp.com/go/techcenter/startup, it gave me documentation and troubleshooting steps to follow. One of the documents it provided is called Hard Disk Error Displays before the Computer Starts. NOTE: I recommend at this point you make an immediate backup of all important data and files. Here are instructions on how to Backing Up Your Files (Windows 8). Please follow the troubleshooting steps provided, re-post with the results of the troubleshooting in detail. Thank you.

Basic NOT EXISTS query not returning any results

DB Version: 10gR2
One of our tables in the test schema is having less number of columns than the PROD shema.
To determine which are missing columns in this table in Test schema i did the following.
-----In Test Schema
CREATE TABLE XYZ2
(COL1 NUMBER);        ----------only one column
SQL > CREATE TABLE tables_test_list AS SELECT TABLE_NAME,COLUMN_NAME FROM USER_TAB_COLS;
Table created.--- In the prod schema
SQL> CREATE TABLE XYZ2
2 (COL1 NUMBER,
3 COL2 NUMBER       ----------- same table name with an extra column
4 );
Table createdAnd from the PROD schema i execute the following SQL to determine what are the columns that are missing in the TEST schema
select column_name from User_Tab_Cols outer
where table_name='XYZ2'
and not exists (select 1 from TEST_SCHEMA.tables_test_list inner where outer.TABLE_NAME=inner.TABLE_NAME )But the above query is not returning any results. Any idea why?

Actually, the example from the link I posted earlier:
[email protected]> (
2 select 'IN T1, NOT T2', column_name,data_type,data_length
3    from user_tab_columns
4   where table_name = 'T1'
5 MINUS
6 select 'IN T1, NOT T2', column_name,data_type,data_length
7    from user_tab_columns
8   where table_name = 'T2'
9 )
10 UNION ALL
11 (
12 select 'IN T2, NOT T1', column_name,data_type,data_length
13    from user_tab_columns
14   where table_name = 'T2'
15 MINUS
16 select 'IN T2, NOT T1', column_name,data_type,data_length
17    from user_tab_columns
18   where table_name = 'T1'
19 )
20 /

Not exists Vs not in with Rowid

Hi All,
We have a query and fires great with Not IN Clause. Due to the performance bottle neck wrt to not in we tried it using not exists and the query is not giving desired output.
select * from emp
     where rowid not in
     select min(rowid)
     from emp
     group by deptno
     )how to rewrite this query with not exists, i have a similar query running in my production creating problem. Min(rowid) is also not allowed in the having clause. How to over come this or write a better query as a replacement to provided one here.
Thanks in advance to the forum users.
Edited by: ramarun on Nov 1, 2010 9:40 PM

Not sure I understand what you are trying to achieve, is it to get all members of the EMP table that are not the first member of each department??
Please confirm / clarify?
regards,
Robert.

The material document 4900000476 2009 does not have materials relevant for

Dear SAP Experts,
I have created the Subcontracting Purchase order for the finished product.In Material Data I have entered the subcomponents.I have done the transfer posting of that particular components to that vendor with 541 Mov Type,
When i go to create a subcontracring challan, i have entered the mat doc number(541 Mov type),year,excise group and series group at that time i am facing the above error.
I have activated subcontact item indicator in J1id for the above both materials and vendor.How can i solve the above error
Can anyone help in this regard,
Thanks,

Hi,
hope you have maintained j1ID, anyway ensure this
1 . material and chapter ID combination ( for both the input and output materials)
2. maintaining of assessable value ( for both the input and output materials)
    of -course tick the subcontract item.
3. Then maintain cenvat determination like this.
    input material     output material
       A                         A              (maintain the same material part number in both the columns)
       B                         B
Where A is input material and B is output material as per your PO
Regards,
S.V

The material 332-369090-00 does not exist or not activated

Similar Messages

Maybe you are looking for