The material code does not exist or is not activated

Dear All,
I am using SAP ECC6. When I go through MM03 for certain material code, it gives the error: The material code does not exist or is not activated.
But this code exists in MARA. There seems to be no problem in the fields of MARA.
Where the problem can be?
Regds
Amit

do you know when and how the material was created?
Maybe the material is stored with a key that does not anymore fit to the customizing.
In SE16 in menu Settings > user parameter   check if you have a flag in field conversion exit., if yes, then remove it  and display this material along with other materials that you can access with MM03 in one list.
Check if the material number is different from the others (e.g. with or without leading zeros)

Similar Messages

  • "The company code does not exist or has not been fully maintained" in mm01

    Hi all,
    I am creating a material, it needs me to provide company code. when I gave out my company code, it reports:
    "The company code ZXXX does not exist or has not been fully maintained".
    what should the problem be?
    thanks and regards,
    Smaosn Zhu

    Hi Raja,
    Checked all you specified.
    I have done these assignments:
    1. assign comp - > comp code
    2. assign plant- > comp code
    3. assign purch. org - > comp code
    4. assign purch. org - > plant
    but the problem is still there.
    let me try to re-do it.
    thanks,
    samson

  • BAPI_GOODSMVT_CREATE Error - The material does not exist or is not activatd

    Scenario is to make a Goods Receipt on a material which is being imported from external sources.
    There is a purchase order created for this already in SAP.
    From MII we are using standard BAPI - BAPI_GOODSMVT_CREATE and passing the fields below:
    GM_Code - 01 since it is a goods receipt
    Psting_date - current date
    Material - material code given by SAP
    Plant - Plant code on which GR takes place.
    Move_type - 101 because it is a GR
    Entry_Qnt - 1
    PO_number - Purchase order which is created in SAP
    When I pass these details to the standard BAPI I get a return message - " The material 10xxxxxxxx does not exist or is not activated"
    Not sure where I am going wrong.
    Any help is highly appreciated.

    Thanks for your reply Vinod...
    Well.. I am calling this BAPI from Netweaver MII and I just see the request and response tags to which I pass the required values to BAPI request fields.
    I am not sure how to call this FM which you are refering to, can you please elobrate a bit or is there any guide I am refer to?

  • The company code TEST does not exist or has not been fully maintained

    Dear Experts,
    I received the following message when I tried to create a material master from Plant Maintenance module (select view based on general plant data / storage 1).
    "The company code TEST does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code TEST or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.
    However, I've done all the above instructions, yet the message still appear.  what else should I check?
    regards,
    Abraham

    Hi,
    I've done that earlier..
    However, I've chosen the default plant 0001 instead of my own created plant, it works.  Then I tried to do it again, with my own plant, it works also..
    Anyway, thanks a lot.
    regards,
    Abraham

  • The company code OMPL does not exist or has not been fully maintained

    hi friends i did in obyc setting also fi posting are happens but the think is mm posting are not happen and not able work on transation code-mmo1i seen  transation code:omsy but company code is not mantain properly this is happen in mm module please give hints where to customization please help friends i am on client please
    ok
    The company code OMPL does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code OMPL or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    u2022     Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    u2022     Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    u2022     Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.

    hi
    Try to maintain the settings in OMSY
    and check the posting periods for your company
    regards

  • The company code 123 does not exist or has not been fully maintained

    hi...
    frnds..
    Error: The company code 123 does not exist or has not been fully maintained..
    While creating material master, am getting this error... how to resolve this...
    Thanks in advance...
    Raghav.KH

    Hi,
    Check in OX02 whether the city, country, currency and language are maintained and in OX16 it is assigned to company.
    If your company code does not exist create new entries by giving an ID and description and fill the above particulars and
    assign to the company.
    Regards,
    Sadashivan

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

  • Error : COmpany code does not exist or has not been fully maintained

    Hi ,
    I tried creating a material with industry sector : mechanical , material type : raw material.
    i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
    but i get this error COmpany code 2001 does not exist or has not been fully maintained..
    I created COMPANY CODE using SPRO - Entreprise structure --definition -  financial accounting --define , copy , check , delete company code..
    kindly suggest me the solution for this error..

    Hi,
    Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
    Please activate in T.code: OMSY,
    [For example: For Fiscal year variant K4]
    In OMSY steps, u have to enteru2026u2026u2026..
    Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
    Company Name..
    Fiscal Year of Current Period 2009
    Current period (posting period) 03( )
    Fiscal year of previous period 2008( will come automatic)
    Month of previous period 02( will come automatic)
    Fiscal year of last period of previous year 2008
    Last month of previous year 12
    Allow Posting to Previous Period (Back posting)
    Disallow back posting after a change of period
    Now create material with T.code; MM01
    Regards,
    Biju K

  • Bapi_Goodsmvt_Create: Material does not exist or is not activated....

    Hi all,
    I'm using .Net connector to execute BAPI from my program and I'm able to login but always get the same message when I try to execute the material transfer: <b>Material xxx does not exist or is not activated</b>.
    I'm not sure it has anything to do with the permission of my account because this is the first time our SAP admin create a "Communication" type user and we really don't know what kind of permission is good enough for BAPI_GOODSMVT_CREATE. Plus the error message does not show any thing about permission.... And same message returned if I use the dialog user.
    If I use transaction MB1B to do the transfer (with the same material) then things are ok.
    Any ideas are appreciated,
    Eric
    Message was edited by:
            Eric Nguyen

    The only thing I can think of is that when calling from .net,  you are passing the material number without its internal format.  The material number field in R/3 is an 18 character field.  If the material number is numeric, the materail number is then padded with zeros on the left.  Example, for material 12345, the internal format is 000000000000012345.  If the BAPI in question is not fomatting the material internally in the BAPI, then it must be passed this way.  CHeck how you are passing, if it is numeric and not zero filled left,  then you must write some .net code to do so.
    Regards,
    Rich Heilman

  • Company code  does not exist  or has not been fully maintained-very urgent

    HI
    while creating material master the  teh error "compcode does not exist or has not been fully mainteined" giving.
    i checked the  global settings , they are correct.
    I checked the plants assign also.
    very urgent
    Thanks
    sasikanth.

    hi
    goto OMSY and assign periods to compnay code
    check  OB37 assign fiscal year variant
    OB62 assign chart of accounts
    i am sure check the above settings u r problem will be solved
    prashanth

  • The user does not exist or is not unique - workflow problem

    I am using Solution Starters Dynamic Management workflow on my Project Server 2010.  I was working fine for a year now, but today all workflows were broken when someone tried to submit them to a next stage. "Workflow terminated. An error has occurred
    in the workflow."
    I tried debbuging the workflow and it seems to be OK, but the problem appears when it needs to assign tasks to the approvers (they are in the Approvers group). When I remove users from the group that represents approvers (and leave that group empty), it
    works fine, so I am guessing that users (who need to approve the stage) are the problem. My administrators are saying that there were no updates or changes on AD machine.
    I don't have problem with users in any of people picker fields or anywhere else on the site. I am using claims auth.
    What could be the reason for this behavior??
    These are main errors from the log:
    Failed to persist workflow instance: 7dc2e035-cd02-4284-b851-a829e372a809 with error code: 5, instance data size: 29578, internal state: Running, processing id: 1e2211d2-ef7b-4416-90ef-ac041396c200    2f83db27-34da-4275-a42e-0625240af921
    The user does not exist or is not unique.
    WinWF Internal Error, terminating workflow Id# 7dc2e035-cd02-4284-b851-a829e372a809   
    System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.  Parameter name: additionalNodes     at Microsoft.Office.Workflow.Actions.OfficeTask.ProcessTaskError(Object sender, EventArgs e)    
    at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()

    It appears that this isn't the problem with users, but it is a problem with Office Tasks. This is the main error in ULS logs (same as in the previous post):
    "Specified argument was out of the range of valid values.  Parameter name: additionalNodes"
    I noticed that all content types are gone from my pwa site. Is it possible that my workflow is causing problems when adding tasks because somebody deleted all content types??

  • The collection you specified does not exists or is not registered with the ColdFusion Search Service.

    While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
    Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
    Any help on this would be greatly appreciated.
    Detail
    The collection you specified does not exists or is not registered with the ColdFusion Search Service.
    Message
    The collection rc_collectiom does not exist.
    StackTrace
    coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
    The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
    When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
    I am not claiming that technically this theory is correct, but this seems to be the problem.
    If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code.

  • Error: The user does not exist or is not unique - when setting permission programmatically

    Hi,
    I am custom Sequential workflow in which I am breaking the permission and setting permission to list item.
    I have used the below code for setting Permission:
    SPRoleDefinition oSPRoleDefinition = oSPWeb.RoleDefinitions["RoleName"];
    //Grant permission to Manager
    SPRoleAssignment oSPRoleAssignmentManager = new SPRoleAssignment(strManagerLanID, strManagerEmail, "", "");
    oSPRoleAssignmentManager.RoleDefinitionBindings.Add(oSPRoleDefinition);
    CurrentListItem.RoleAssignments.Add(oSPRoleAssignmentManager);
    I am getting the error as :
    Error: The user does not exist or is not unique.
    How to fix this?
    Thanks

    I think you misunderstood the solution proposed by frederic, what he is suggesting is that the error doesn't come from your code but from the user account
    have you tried with another account ? (maybe the one you are using to log to your environment)
    With this information, it will help us to know if the problem comes from your code or from the user account
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • Error when opening indd-file: Either the file does not exist, you do not have permission, or the...

    Hi! I'm having trouble opening a indd-file. It was sent to me as a zip-fil along with the used fonts and links. When I try to open the file, I'm getting this error: "Either the file does not exist, you do not have permission, or the file may be in use by another application". I've tried to look up this error both here in these forums and through google, but can't find a similar case. Hope someone can help me with this. Please let me know if you need more information/details, and I'll provide. Thanks!

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I'm suspecting it to come from a mac user, if that could influence the case...
    It does come from a Mac, as is proven by the fonts, which are of no use on my Windows machine, but that doesn't prevent my CS4 to open it without any problem. It seems to me it's a perfectly regular CS2 file.
    Just for cheers I set the file to Read-only, but my InDesign opens it regardless (again as a copy, because it's a "converted" file).
    Could it be something in your environment? No network read/write privileges, insufficient free hard disk space, stuff like that?

  • Disk " disk " does not exist or is not instantiated after reboot the server

    Hi,
    I have one issue with 11gR2 cluster. I have 2 node cluster on CentOS 5.5. I am using HP MSA 1000 storage LUNs and create disk group and volume for RAC setup in openfiler.
    The whole setup was running fine but before few days some one has recreate the database [clusterDB] using control file. I can see this from alter.log file of "oracle" user. And somehow one node is not able to up and running.
    I have no idea what is going on so just restart both the nodes and storage one by one.
    After restarting I can not view my ASM disk from /usr/sbin/oracleasm listdisks.
    EvenI can not see the ASMdisk from /dev/oracleasm/disks... also I try to querydisk it showing that "Disk "<diskname>" does not exist or is not instantiated"
    From the master node I can see the cluster registry configuration through "ocrcheck -config"
    *./ocrcheck -config*
    Oracle Cluster Registry configuration is :
    Device/File Name : +ACFSDG
    from the slave when I run the ocrcheck ...it gives error
    PROT-602: Failed to retrieve data from the cluster registry
    PROC-26: Error while accessing the physical storage ASM error [SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
    AMDU-00210: No disks found in diskgroup ACFSDG
    AMDU-00210: No disks found in diskgroup ACFSDG
    ] [8]
    Any idea what is the cause behind this? There are many errors in $GRID_HOME/log/<hostname>.log file and other referring file. I might be sure that until I enable the ASMDISK/detect the ASMDISK I can not start crs...
    Shall I try with restore operation of OCR or replace option in ./ocrcheck...will it usefull?
    Let me know if you have already face this issue.
    Thanks...
    Edited by: user12039625 on Nov 12, 2010 5:30 AM
    Edited by: user12039625 on Nov 12, 2010 5:36 AM

    Hi,
    Thanks for your reply.
    I have "/dev/sd*" in my both the RAC nodes and on storage machine it was showing as "/dev/dm-*" whenever I run " fdisk -l " command... and I did this through iscsi initiatior and target and also create "Create Persistent Local SCSI Device Names ".
    I also create one script "iscsidev.sh" in /etc/udev and it was perfectly working. Before this issue I was restarted the server and confirm it.
    script is below
    ==============
    # FILE: /etc/udev/scripts/iscsidev.sh
    BUS=${1}
    HOST=${BUS%%:*}
    [ -e /sys/class/iscsi_host ] || exit 1
    file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
    target_name=$(cat ${file})
    # This is not an open-scsi drive
    if [ -z "${target_name}" ]; then
    exit 1
    fi
    # Check if QNAP drive
    check_qnap_target_name=${target_name%%:*}
    if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
    target_name=`echo "${target_name%.*}"`
    fi
    echo "${target_name##*.}"
    ==============
    Thanks...
    Edited by: user12039625 on Nov 12, 2010 6:04 AM

Maybe you are looking for