The Maverick maps has stopped working on my imac

About two weeks ago the Maps app on my 27 inch iMac started to crash shortly after starting up. Now it just bounces a couple of times and then nothing more.
How do I fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

Google maps has stopped working in Safari

Within the last week, Google Maps has stopped working in Safari 6.1.1. It previously worked fine. The page starts to load, and then hangs. It displays the small rectangle that says "loading...". I have tried deleting Safari preferences. This had no effect. Any suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

I am running windows 7. My itunes keep shutting down on me. I keep getting the message itunes has stopped working What can I do?

I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?

Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling

I get the message "rnpag has stopped working" followed by "firfoxx has stopped working", what can I do to get firefox working again?

Over the past few months firefox has been crashing unexpectedly but just today it crashed and will not reopen even after shutting down and restarting my laptop. The message that appears when I start my laptop and again when I try to open firefox is "rnpag has stopped working" this is then followed by the message "firefox has stopped working" when I request a solution to the problem nothing happens.

You don't have "Photoshop" proper. You have a cheapo emasculated version called Photoshop Elements. That is NOT Photoshop.
As Gene told you:
Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Message "itunes has stopped working". Itunes opens and can read an audio cd but as soon as the "get information" option is selected the message "itunes has stopped working" and the computer freezes or at least slows to a snail's pace.

Hi,
I have a PC running Windows 7 - 64bit OS. I have had iTunes installed since the beginning of the year on this computer and have not had any trouble with it except actually using iTunes but that is a different issue. The other day I inadvertently downloaded "Tuneup" which I don't want or need. I firstly want to say I have no concrete evidence that Tuneup has led to my problems. It may be coincidental that Tuneup and my problems appeared together.
Tonight when I started iTunes, Tuneup took over a quarter of the screen on the right side. I closed this program. When the list of tracks was ready to be loaded from the CD and I went to" file" - "get info" option the message "iTunes has stopped working" would appear. Closing this message resulted in iTunes shutting down. I should say that before I closed the message the computer had essentially ground to a halt. The other curious thing was the behavour of the mouse pointer on the screen - the only place where it was visible was in the "iTunes has stopped working" box. Moving it out of the message box resulted in it disappearing. It would reappear if it were caused to wander into the message box.
I subsequently removed Tuneup (control panel, programs and features, etc...) iTunes had not improved. I then deleted iTunes, firstly saving the library to a file on the desktop. Then I did a fresh(?) install of ITunes but there seems to be no change. A curious thing was even though I had deleted iTunes through the control panel the library was still there as if I had done nothing. The whole thing is a complete mystery and extremely galling.
If someone has had a similar problem I would really like to know what the fixes were.
Thanks for "listening".
Cheers,
Grant Andrews.

I had a similar problem. I'm using 64bit Windows7. The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes
Also, reinstalling Quicktime has worked for others having this same issue.

I keep getting the message itunes has stopped working I can't even open itunes I have tried uninstalling and installing, starting in safe mode but nothing seems to work. Please can anyone help me

I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.

If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

I keep getting the message "iTunes has stopped working". May I have some help please to solve this?

I just updated to iTunes 10.5 and now, I can't listen to music or watch a movie without the message "iTunes has stopped working" popping up. As soon as this happens, iTunes crashes completely. I'm running on Windows 7 - 64 bit. May I have some help please

If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

HT1349 As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening :( . What can i do?

As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening . What can i do? Please HELP

Hi,
i have tried all that and it still comes up with the same message or doesnt open at all . I have also i have created a new user and itunes works fine on that account.

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

I can't play MPEG4.avi video - all I get is "The video player has stopped working. Please relaunch"

I can't play MPEG4.avi, or any other, video - all I get is "The video player has stopped working. Please relaunch". Please tell me what to do.

I took the video in 2009. I can't remember the camera model I took it with and the other information you request does not show up in the "i" panel in iPhoto.
My version of iPhoto 11 is 9.2.3.

When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem " This has been going on for several days, I've had to go back IE to access web pages

When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

The Maverick maps has stopped working on my imac

Similar Messages

Maybe you are looking for