The MBP reboots during work in Aperture 3

During the image selection process in Aperture, the computer shuts down unexpectedly, this happens quite often - about half- to a third of the times that the selection processs is being performed. After the computer reboots, the Aperture library needs to be repaired, but I have not detected any damaged images.
Are there an ideas on what can cause these reboots, how to fix it or how to perform some type of diagnostic test in order to find out the cause for this behaviour?
Aperture version: 3.4.3
Computer: MacBook Pro 13", Intel Core 2 Duo 2.4 GHz, 4GB ram, NVIDIA GeForce 320M
I am not very experienced with Macs, but as far as I've understood, the computer shouldn't just shut down in mid process like this.
Thanks in advance.

https://discussions.apple.com/community/professional_applications/aperture

Similar Messages

  • I am having problems restoring an iPod Touch 5G because of lost passcode.  The iPod reboots during the process each time so the software cannot be restored.

    Has anyone else experienced this?
    Thanks,

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • ZTE Open C reboots during calls

    The phone reboots during calls. OS version 1.3, latest according to ZTE.
    Thing is, only when it is set to use 3G. But if I set to 2G the audio is absolutely terrible.
    Both when using 2G and 3G sometimes the calls get cut-off on the receiver phone. I can hear the other person talking but the other person doesn't hear anything. This is another issue.
    What can I do? The phone was bought from Ebay on September 2014.
    Problem didn't start now, ZTE Ebay support said the issue was a SIM one. I recently changed to 3G because the noises in 2G are almost unbearable.

    ''Ralph Daub [[#answer-713346|said]]''
    <blockquote>
    Hi Falconet,
    I understand you are experiencing rebooting and call quality issues on your ZTE Open C device.
    Since ZTE is responsible for the Firefox OS build specific to your device, I would suggest following their advice.
    You may be able to request a new SIM card for your device by contacting your carrier support.
    I hope this resolves your issue. Please let us know if you have any other questions about your Firefox OS device.
    Thanks,
    - Ralph
    </blockquote>
    Hi,
    What ZTE meant was changing carriers not just sim card. I can't do that for another 1.5 years. The reason they said is because the phone seemed fine for a while when using another carrier. Sadly, the SIM is fine since another SIM card from the same carrier does the same. Both are working fine on Android Phones.

  • Previously installed Aperture3 on an iMac and a MBP. I Bought a new MBA to replace the MBP and I want to install Aperture3 on the new MBA.  The installer says the serial code is invalid? What do I do?

    I previously bought Aperture 3 and installed in on an iMac and a MBP.  I just bought a new MBA to replace the MBP, but the MBA doesn't have enough memory for me to do a complete restore of the MBP on the MBA.  So I am trying to find a way to deactivate the serial code or Aperture 3 on the MBP so I can reinstall Aperture 3 on the MBA.  I have been searching forums and google and I have not been any answers.  Any help would be appreciated.  Thanks.

    How did you buy Aperture? Did you buy it from the App Store? Then you can download it again on your MBA, if you sign into the App Store.
    If you bought Aperture buy buying a licence key to unlock the trial, try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    And if you own the boxed DVD installer , use the DVD to install Aperture on your MBA. If the installer does not work - and you get the message
    "check with the developer to make sure Aperture works with this version of Mac OS X"
    you may have a problem with an expired developer certificate (they expired mid march).
    To fix this, set the Date  in " SystemPreferences -> Date&Time" to a date well before March 2012 and run the Installer again. If that succeeds and Aperture now runs, reset the date to the current date.
    You can see your serial number in the "About" panel in the main Aperture menu bar on your MBP:
    Aperture > About Aperture.
    For the "invaldid serial number" see these links: You may have read the letters incorrectly - some are look alike, "1" or "I", "0" or "O"; your shift-lock key may be set.
    - Pro Application Replacement Serial Numbers: http://support.apple.com/kb/HT1861
    - Troubleshooting Professional Application Serial Numbers:
    http://support.apple.com/kb/TS2005
    Regards
    Léonie

  • Reboot during lion installation

    Hi @all,
    i've downloaded lion from the App-Store.
    After the download the installer startet automaticly and reboot the System.
    The problem is, that the installer starts after the first reboot and failed with no error and shutdown the system.
    After restart the MacBook Pro, the system reboots during the installation anymore,
    what can i do ?
    thx
    forti

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

    hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Hi,
    Can you pls. provide more details of the issue?
    OS/Platform
    It would be great if you can provide the MSI logs for repair from the %temp% directory.
    Thanks,

  • Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

    Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying.  iPhone remote app works just fine.  Any suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    I haven't received an answer. I hope someone can answer this because it's an ongoing problem that I can't play some CDs on my MacBook Air (see my original post for the details). Anyone? Please? Thanks in advance!

  • After I unplug headphones, the speakers no longer work until rebooted.  Anyone else experience this?  Also had the same issue on the Droid Razr Maxx.

    After I unplug headphones, the speakers no longer work until rebooted.  Anyone else experience this?  Also had the same issue on the Droid Razr Maxx.

        Ahh. We can still help find the culprit, TeaParty14. Do you have any 3rd party applications installed to play your music? Are you able to hear any audio if you plug the headphones back into the phone instead of rebooting? Any audio for calls through the phone direct or through speakerphone?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Is Aperture 3 the best software for working on a databse of images from different photographers?

    Hi everybody,
    I have only been using Aperture for a few months and am unsure of its suitability for this project.
    It seems to me that Aperture is designed for the photographer who wants to work on his own photos. I need to select, re-name, add metadata, keyword & eventually improve photos & re-size photos to be used on a website. Photos come from all over the world & different copyright names & rights.
    In my previous job, I  used XnView for PC for the selection, renaming & metadata process  & Extensis Portfolio for adding keywords & Photoshop for working on technical improvements, I would like to know whether somebody out there uses Aperture (3) for much of this process.
    Can you share an ongoing project over 2 different computer owned by 2 different people in Aperture 3 updating each simultaneously?
    I will work on some photos on my computer and other photos at my client's house. I presume that I will have to export the photos that I work on on my computer to my USB stick in order to be able to read the information that I have saved on my computer on her computer??. It seems that even if one chooses to save photos to the original file and thus work on 'managed masters', it doesn't save over the original file. I have just done some more work on this photo database on my computer I decided to save to 'referenced master', ie: the aperture library.
    However, when I want to continue working on this big project, I want to update the aperture photo library on my client's Aperture library, do I have to export the work I have done in my computer in Aperture to my USB stick and then re-import on the other computer to keep all the images up-to-date, this will be an ongoing situation. Can this work? I cannot see a way of joining the Aperture library from 2 computers in another way.
    I have just read this article: http://www.apertureexpert.com/tips/2010/2/12/aperture-3a-game-changer-multiple-m acs-syncing-projects-more.html
    It's very good but, I still don't understand how to take my edited images worked on in Aperture from my computer to my client's one. Do I have to connect the computers and if so how is this done?
    I have also read this: http://support.apple.com/kb/PH7863
    If I want to constantly update each Aperture library when switching computers, do I have to follow this procedure of exporting the photos as a library from one computer to another with the updated images?
    I really appreciate any clear help I can get from this forum.
    Thank you in advance!

    Aperture would be fine for a single editor editing images from multiple photographers. It would not work well (if at all) for multiple people trying to edit the same library.
    so the answer to this:
    Can you share an ongoing project over 2 different computer owned by 2 different people in Aperture 3 updating each simultaneously?
    is no.
    I will work on some photos on my computer and other photos at my client's house.
    The images at your client's house will be from where? Will the client have  Aperture running in the house on there computer?
    Apart from those two the rest of your post is a bit impenetrable.
    But a few thoughts you can mull over:
    You could put the Aperture library on an external drive and carry the drive between locations. If you wanted to leave the library of a part of the library there you could copy to the clients drive (if you're leaving the whole thing) or else export the projects/albums/images as a library and have the client import that into there library (or just run it as a standalone library)
    regards

  • I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

    I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
    Why the mouse pointer in Logic Pro does not change shape during work???
    It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
    At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
    The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
    With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
    This thing drives me crazy!
    Solutions?
    Here some ideas in other foums:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
    But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

    I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
    The Result:
    Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
    BUT
    Reason and Nuendo dont' have this issue !!
    I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
    And that's not all!
    After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
    Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

  • Appear flashing line on the screen during work

    I bought Macbook Air since 1st July 14. I found the flash line appear on screen during work but it's just shot line at the first and It appears just few secs. So I thought it's not too serious to me. Till now the line is seem more longer and appear frequently. Then I decide to take it to Service centre. They said my screen is not in its position. It's just a bit, If you don't look at it exactly, you won't notice it. I don't know what happen. It's usually as it was on fist day I bought it, never be fallen it. It's still in the good condition.  They fixed my problem by re-fit my screen but after I use it again I still found that flash line. what should I do? Now my air got the scratch on the screen edge from re-fitted it.  I really disappoint.

    I'm assuming by "flash line" you mean there's a horizontal or vertical line randomly appearing on your screen? If that's the case I've seen that on laptops before. If its an intermittent issue try to move the screen forwards and backwards on its hinge to see if you can find one spot where that line almost always appears. You should have an issue with the cable connection to the main logic board, or the cable itself could be malfunctioning.
    Also what exactly did they do when they "re-fit" your screen? Did they simple check the connectors, or actually dissemble the computer and resemble it? Either way if a cable is bad then it wouldn't have made a difference. You may be looking at a warranty replacement solution on this one.

  • Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

Maybe you are looking for