The menu bar will not show up.

I accidentally hid the menu bar (which has file, view etc. on it) and i do not know how to get it back. Please help me.
== This happened ==
Just once or twice
== Today

Press the Alt key, this will temporarily display the menu bar.
You can then make it permanently display the menu bar by selecting the View menu option, then Toolbars, and finally Menu bar

Similar Messages

  • My clock in the menu bar will not keep time.

    My clock in the menu bar will not keep time.
    However, if I click on it and open Date & Time and do nothing more, it adjusts to the current time but still doesn't work as the seconds aren't advancing. I close Date & Time but the clock stays highlighted/selectted, which is also strange.
    Any suggestions as to how to get my clock running again?

    Hi Peter,
    Not certain, but I'd try this...
    You've probably got a couple of corrupt preference files.
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
    /Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
    where 'xxx' is a 12 digit (hexadecimal) numeric string.
    This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
    reboot

  • The url bar will not show the full url of an website.

    When I go to a website Firefox doesn't show the full URL I'm not talking about the http:// part but the bottom half of the URL is cut off. Though if I scroll/move the text over the rest of the URL appears.
    Images
    http://i.minus.com/iJWfmqV1wlN7g.png
    http://i.minus.com/iEmXgazGQbM0.png
    This just started today for me though after I had some problems with a plug-in called Grease Monkey un-enabling itself but that problem fixed itself

    hello lilirulu, do you have a device with a fingerprint reader and authentec truesuite software (might be re-branded with a different name by your manufacturer)? if so please try updating it to the latest version or in case this doesn't work either you might have to contact the truesuite support directly.
    in [https://support.mozilla.org/questions/937571 this thread] we've already gone through the whole firefox troubleshooting procedure available and it looked like that no tweak or setting in firefox could cure the issue...

  • Srpy menu bar will not display

    Was working away on modifying a spry menu bar when all of a
    sudden the menu bar will not display. Tried creating a new page and
    inserting the menu bar and still will not display. Won't even
    display in previous pages created.
    Anybody have any ideas?
    Thanks

    The following code calls the MenuBar widget into your
    document, but the widget will not be found, if the code that I
    provided you is not properly formatted.
    <script type="text/javascript">
    <!--
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1",
    {imgDown:"SpryAssets/SpryMenuBarDownHover.gif",
    imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    //-->
    </script>
    When I insert a SPRY widget into my document the Javascript
    and CSS files that construct and determine the appearance of the
    widget are automatically placed into a folder called SpryAssets. My
    document is housed in a different folder. Thus, I must exit the
    folder in which my document is contained before entering the
    SpryAssets folder. When I read your href attribute it appears that
    your SpryAsset folder and your document are located in the same
    directory folder. If this is true, then I do not understand why
    your widget does not appear.
    I can offer two additional suggestions, and then my knowledge
    of what might be wrong is exhausted:
    1) If possible insert the widget again using a previous
    version of your document in which the widget has not already been
    inserted.
    2) Always make sure that your document has been saved at
    least once before inserting a SPRY object. This will insure that
    everything is properly linked when the widget is inserted.
    In the meantime, maybe someone more knowledgeable than I will
    be able to help.

  • Firefox 4: the drop down menus in the top menu bar will not appear in Google pages.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/808729''
    Firefox 4: the drop down menus in the top menu bar will not appear in Google pages. For example, when I click "more" it is like clicking a dead link. Nothing happens. When I click the "tools" icon or my email address to log out, same thing.

    Could you do the following please.
    In the location bar at the top, type '''about:config''' and hit Enter
    In the filter at the top, copy/paste the following setting:
    '''browser.urlbar.maxRichResults'''
    If the figure on the right is a single number, or a minus figure i.e. '''-1''', right click it, choose '''Modify''', remove the current setting and replace it with the figure "'''12'''".
    Then close Firefox and restart it again.
    I went to Google Maps, but as you can see from the screenshot, directions appear to be working.
    You could also try creating a new Profile. See [[Managing profiles]]

  • THE ADDRESS BAR IS NOT SHOWING

    THE ADDRESS BAR DOES NOT SHOW WHERE IS IT
    == This happened ==
    Every time Firefox opened
    == I DOWNLOADED IT

    Be sure that the Navigation Bar is being displayed. On the Menu Bar click View > Toolbars , if there is no check mark next to Navigation Toolbar, click on Navigation Toolbar to place a check mark next to it.
    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars . Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars . Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''

  • Safari: Will NOT Open and Menu Bar will NOT Respond to input

    Safari: When opening Safari it sticks on Top Sites, Menu Bar will NOT respond to inputs and wheel spins indefiantly.  Can someone assist? (I am using OS X Lion 10.7.5 on Macbook Pro)

    If you updated to 6.1 & the problems began then - you might have Glims installed...
    How do I uninstall Glims? | www.MacHangout.com
    If not, test briefly in a new or Guest user account on your computer.

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    Hey there Kellee,
    It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Start with these three steps, and there are more in the article if you need them.
    1. Update iTunes
    Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
    2. Check the USB cable
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    3. Verify that Apple Mobile Device Support is installed
    iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
    Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
    Reinstall iTunes for Windows XP
    Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
    If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Menu bar does not show on screen?

    Menu bar does not show on screen.

    I'll assume your profile is wrong (10.4.7?) and you are using Lion in full screen mode.  If so click the double arrows in the menu bar which should appeare if you mouse into the menu bar area.
    If that isn't the case then are you zoomed in?  Contol + fingler drag on mouse (or scroll wheel) zooms in or out (see Mouse preferences, Screen Zoom, look at the little movie).

  • I have Windows 8. The address bar does not show on firefox. How do I fix this?

    The address bar does not show. How do I get it to appear?

    * If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear. Make sure that you have the Navigation Toolbar and other toolbars visible: View > Toolbars .
    * If items are missing then see if you can find them in the View > Toolbars > Customize window.
    * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
    * If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
    See also [[Back and forward or other toolbar buttons are missing]] and [[Customize navigation buttons like back, home, bookmarks and reload]] See http://kb.mozillazine.org/Toolbar_customization

  • When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • The volume controls will not show up in the music app or the lock screen music controls. What do I do?

    The volume controls will not show up in the music app or I the lock screen music controls. What do I do?

    OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it    Can not believe it was that simple. I am one happy person again.....

Maybe you are looking for