The meta data for the IDoc type "MATMAS05" is unavailable
Dear Gurus:
I need help in completing small test that I am doing to send MATMAS IDOC to xMII.
I have done:
1. RFC connection SM69 and tested ok
2. xMII IDOC Listner config with my SAP client
3. Connection appears in smgw ok (in logon client screen)
4. Completed Distribution channel and we20,we21
All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
On tRFC I see error The meta data for the IDoc type "MATMAS05" is unavailable.
Note that
a) I am NOT using transaction on routing tab
b) xMII version 11.5
c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
Please help.
Thanks
Jay
Jay,
What version of ERP are you using, perhaps this note will help: 770239
Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
-Sam
null
Similar Messages
-
The meta data for the IDoc type "LOIPRO01" is unavailable
Hello,
i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
The meta data for the IDOC type LOIPRO01 is unavailable
I've checked the parameters on MII side of the IDOC Listener:
Servername MII_JCI33
server Properties
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
progid MII_JCI33
trace 1
params
snc_myname
snc_qop
snc_lib
unicode 1
max_startup_delay
Client Properties
client 303
user RFC-I33
alias_user
passwd
lang en
sysnr 02
ashost h33-i0.rz.k-plus-s.net
mshost H33-I0.rz.k-plus-s.net
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
r3name H33
group
tpname MII_JCI33
tphost H33-I0.rz.k-plus-s.net
type 3
trace 1
codepage 1
There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
Has anyone an idea ?
Kind Regards,
Thomas StreckerThomas,
There is a link for a basic IDoc installation that may help.
[IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
One other issue that has occurred to cause problems is registering the program in Visual Administrator. If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server). Delete the registration in VA, if you did it.
If there are other error messages available, please post them.
Good luck,
Mike
I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem. Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
Edited by: Michael Appleby on Feb 10, 2009 5:02 PM -
ALE/IDOC:The group data for the material CS94163AOOO is locked by ECPUSER
Dear All,
I have extended the idoc for MATMAS and getting -The group data for the material CS94163AOOO is locked by ECPUSER
error on receving ( production ) server.I have written BDC in Z-function module to upload the data for extended segments after calling IDOC_INPUT_MATMAS01 function module.
When the same scenario executed in development server the material is not getting locked and idoc is posted successfully.
Please guide to resolve the error.
Thanks,
Sanjay Deshpande.
Edited by: sanjay_123 on Nov 1, 2009 4:41 PMHello,
Can you pls try to use ENQUEUE_E_TABLE or FM specific to lock/unlock MARA table during Idoc creation.
and put some WAIT statement before creation.
CALL FUNCTION 'ENQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '2'
*_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then write code for creation of MARA
Unlcok now like this
CALL FUNCTION 'DEQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '3'
_SYNCHRON = ' '
_COLLECT = ' '
~Pramod
Edited by: PKUPADHYAY on Nov 1, 2009 5:40 PM -
I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NLDid you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go -
Can we use the AdventureWorks2008R2 data for the real time project.
Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com -
How do I change the start date for the week from Monday to Sunday on my iPhone 5?
How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?
Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone
-
When is the release date for the 5th generation iPod touch
When is the release date for the 5th generation iPod touch?
Nobody knows (except for apple of course). All it says on the ipod touch page that it ships in October so it could be any date. I predict that it is in the first two weeks of October but when it says buy it now instead of pre-order you know its about to come out.
-
LIS - To get the data for the missing data for the infostructure S906
Hi
We have performed an unicode conversion In our SAP ECC 6.0 system, after the conversion, the infostructure S906 (copy of S006) was not updated for the period 22nd June to 25th June 09.
Then we regenerated the infostructure S906 using the tcode MCS/ on 26th June and after which the update rules are working correctly in S906.
Now when we run the SOP report for this week, the data is missing for the period 22nd June to 25th June 09.
We have gone thru the note 64636 - to setup the infostructure from the begining, which needs more downtime.
Is there a possibility to get the missing data for the above period only, instead of setting up the infostructure from the beginning.
Thanks & Regards
SenthilYou did not tell us what kind of update are you using. Some transactions (e.g. OLI1) allow to run it by posting date; others (e.g. OLI9) for a range of the documents. You can find what document numbers were created in the period of question and then run it for them. Although I would recommend the full rebuild.
-
How to find out the table, data for the IDOCS is pulled from?
HI
The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397. This creates IDOCS that are sent out and eventually wind up in IMOS.
The IDOC Type is CREMAS.
Can you tell me which table or tables the data for these IDOCS is pulled from?
Or tell me the procedure to find out the table name.
Thanks,
das.
Edited by: sathish dasari on Dec 10, 2009 11:54 AMYou can use Transp. Table TBD62 .
enter Message Type CREMAS
you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table BDCP. -
How can I transfer the meta data to the Oracle OLAP Object?
When I finished in building a simple DataWare house demo in the warehouse Builder, I got meta data. But it seems that those doesn't present in the "<Database>" - "OLAP" - "Dimension" where the Sample "SH" resides.I just want to export those metadata to the SQL script, but failing to import the script to the Database. How can I transfer my demo's meta data to the OLAP Object? It is the last step to finish the whole process and I can't solve the problem.
I'll appreciate any one who can help me.Hello,
To enter/move the metadata for dimensions and facts to the OLAP catalog, you need to perform the following actions:
1) Create a business area in the OWB business tree holding the dimensions and facts you want in OLAP
2) Perform a metadata export, using the bridge (not to file!)
3) This will launch a wizard that will guide you through this process, follow the instructions carefully
4) Upon completion you will see metadata added into the OLAP catalog
We will be releasing a new version for this, which will be running on 9.2.0.2 database that allows you to use all the new 9i Release 2 OLAP features. This will create Analytic Workspaces from Warehouse Builder and should be released late this year (around end of November).
Hope this helps,
Jean-Pierre -
I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.
In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
Cyril Bouton
Active LabVIEW Developper -
The delivery date for the PR needs to consider planning Calender Periods
Hi Friends,
Please help me in solving in my scenario given below:
The Planning calender periods are from Monday through Thursday(No Friday and weekends). When there is a Purchase Requisition (PR) planned date on Monday and the GR processing time is one day. The delivery date should be on the before Thursday (Becasue there is no period on Friday).
But, the delivery date is being created with the before Friday, which shouldn't happen.(Requirement is that Delivery date shouldn't consider that friday, hence, the delivery date needs to be on Thursday).
NOTE: The lot size settings are Lot sizing Procedure : P(Period lot sizing procedure), Lot-size indicator: K (Period lot size as in Planning Calender), Scheduling : 1 (Period Start = Delivery date).
Thanks for helping me in advance,
Surendra ChakkaHi Santosh,
Thanks for your Questions. Below are the explainations:
1. Can you expalin how your system is behaving at the moment?
A. Presently the GR Processing time is 1 day for a material in Plant. So, if the user wants to produce on Wednesday (Planned date in PR, provided by the MRP run), then the delivery should be on Tuesday (Because GR processing time is 1 day). In the same way, he dont wants the delivery to be on Friday. I mean, if he wants to produce on Monday, he wants the delivery to be on Thursday.
Only Friday, he don't wants to make the Delivery.(The delivery date should not show Friday in PR's).
2. Pls explain your original MRP view and planning calendor setting...
A. For solving of the above issue, we changed the Lot size to copy of "PK" - Period lot size acc to planniong calendar. Then we maintained the Planning calendar, in which the periods are for every Monday, tuesday, wednesday and thursday. Expecting, the delivery should be excluded for friday, the friday in the planning calendar is not given as a period.
The scheduling paramter in the Lotsize is tried with both the options (period start = Deliery date and period end = Delivery date).
Later removed "PD" in MRP type and tried with "R1" Time phase req. But, the precondition for this is to maintain "Forecast req". This is also done. But, then, the system for this material is not responding to the MRP run. It is asking to run the forecast model. We ar not using SOP.
3. The results thst you get with current setting?
A. For the planned date in PR of Monday, the delivery date in PR is on the day before monday. i.e., Friday (Saturday and sundays are holidays).
4. Expected results...?
A. For the planned date in PR of Monday, the delivery date in PR should be Thursday (the day before monday production).
Hope, i am clear in my explaination. Please revert back, if you need any more information.
Thanks and Regards
Surendra Chakka -
Error when reading the access data for the Adapter Engine
We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
AmarI got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually. -
Unable to presist the business indicator meta data for the Audit Core
The error above - caused by javax.ejb.EJBException is - I belive due to implementing too many business indicators? however I'm puzzled as to why this error occures and how to fix?
Thanks for any insights,
RossHi Experts,
How to configure and launch the Siebel EAI?
I'm having problems with url: http://ws811/eai_enu/start.swe?SWECmd=Start&SWEHo=ws811
HTTP 500 - Internal server error
Internet Explorer
And the other url is OK:
http://ws811/sales_ENU/start.swe?SWECmd=Start&SWEHo=ws811
Please provide solution the asap. -
How to get the tax data for the material in the Sales:sales org.1 view 1?
as the title,many thanks!
Hi,
the TAX details are stored in table TSKM ---> Material Taxes
You can find field TAKLV ---> Tax classification of the material in MARA table .
You need to link MARA-TAKLV and TSKM-TAXKM field .
Best regards,
raam
Maybe you are looking for
-
Image map (Open a link in the same place not a new Window)
Image map (Open a link in the same place not a new Window) I'm using image map From KM a made a Image and I put the link like this "documents/images/image.jpg" okay, its works, but when I click on the link open other page, How to open on the same pag
-
How do I get iWeb to publish just the files to my root directory
Hey all, when I publish my site to my hosting server via iWeb it's just copying the entire folder into my root directory instead of copying the files to the root directory. This is causing my site url to look like this: www.mysite.com/myfolder/ how d
-
Format of reference document number is invalid Message no. 8A556
Dear Expert, I have problem while executing transaction Manual Posting incoming invoice with t-code FB60. The error message shown as written above "Format of reference document number is invalid Message no. 8A556" I have check the customizing on doc
-
This is with iPad 3 after ios6 update...I be already tried resetting the dates and reboot...not working so far...consistently opening iTunesU on click of iTunes icon.
-
How do you set the End Action on last slide of slideshow
Encore DVD CS3. I must be the village idiot. I have setup a slideshow with manual advance. I cannot find a way to set the end action for the last slide. When I click on the last slide in the slideshow timeline there is no option that I can find for e