The metal flap over the dvd drive won't close on my Mac Pro

The metal flap over the dvd drive won't close on my Mac Pro.Very annoying,dust will kill.
Any ideas?

Hi Toby,
See if one of these videos shows you how to get to it...
http://eshop.macsales.com/installvideos/macpro_2010_opt/
http://eshop.macsales.com/installvideos/macpro_2009_opt/

Similar Messages

4 TB Hitachi drives won't fit in 2008 Mac Pro

I just purchased 2x 4 TB Hitachi drives for my 2008 (3,1) Mac Pro. When I went to install them, they would not fit. I mounted the drives to the sleds, and tried to slide them in. They would only go about 95% of the way, and I could see that the SATA connectors weren't linking up. I pushed fairly hard and couldn't get them to budge.
I turned on the computer to see if they were mounting, and they didn't.
On OWC they say the drives are compatible. Any ideas?

Desktop Hard Drive screws are an SAE (American) #6 size, 32 threads/inch. If you had a die to clean up the threads afterwards, you could file them shorter.
There is also a common electrician's wire stripper/crimper tool that has dies in the handle for those and a few other common screws used in American Elecrtrical work. You can screw a screw into that die, and squeeze the handles to lop off the end, then back it out to clean up the threads. I was surprised to find one in a drawer, and it has been very handy. Looks like this:
-- image courtesy Lowes.com
CD, DVD, and notebook Drives use a metric 3mm screw, 0.5mm/thread

2TB Western Digital Drive won't mount in my Mac Pro. Please Help

Hello, everyone. I have a Mac Pro (MacPro1,1) with an internal drive that won't mount. I bought it used last year with 12GB RAM and 1TB hard drive and SuperDrive. I have since upgraded storage with an internal 2TB drive from Seagate (no problem), and a 500GB drive (no problem) from Western Digital, and installed a second optical drive from an old Power Mac G5. I had an additional newer 2TB drive from WD that I bought as an external. I took it out of its case and put it in a carrier and then in Bay 4 of my Mac Pro. It's the only drive I've had problems with, and I don't know why. The drive is immediately rejected by OS X upon startup. The options include "Eject" and "Initialize..." but I've clicked initialize every time. Disk Utility opens and I can see the drive but for whatever reason, it will not mount. There is one partition on it, and I think when I bought it, I formatted it with GUID and Mac OS Extended (Journaled). I haven't used it as a Time Machine drive, but I've backed up some files on it. I've restarted several times, and I'm not sure if I can hear it spinning inside my computer.
Should I pull it out and see if the partition is still on the disk? Wha

When DU launches or launch it yourself, that is the most useless "eject, ignore" and there is no real initialize command anyway anymore.... Click on raw drive WDxxxx and goto Partition tab, change the number of partitions to anything (another silly item) so you can go to the Advanced Options finally
WD MyBook drives are often not standard SATA drives with power and data connectors.
Does it look like one?
It should be GUID but make sure, you can also tell from the status below.
Might even change it to something else, erase, then set it back to GUID.
Apply. And only then does it matter what user partitions you create.
Jump through hoops for no reason.
If you have Windows or a PC, use WD Lifebuard. Great at testing any SATA drive.
Quick format with zeroes. Then Extended Test. Maybe even Full Format with zeroes to insure no bad sectors.
When and where, at what point in time, did you use it and write files to it?
By "carrier" I assume you mean the drive sled to go inside the Mac Pro.
Did you ever use it in an SATA external other than WD? some of their MyBooks are moled into and drive and case cannot be used separated.

My dvd drive won't work on my MacBook Pro.

I've looked through tons of forums on this subject but have only found people that have the same problem as me but no solutions. I slide in a store bought DVD movie it spins and whirs for a few seconds and then gets spit back out. No sign of it even reading the DVD at all. Please help.

Probably you have already read this article. If so ignore this reply.
http://support.apple.com/kb/HT2801

My dvd drive won't open so I can insert a disc. It has opened in the past by pushing the button on my mac

I can't insert any dvd's because my dvd drive won't open when I push the open key. It has always worked in the past. Any suggestions on how to fix this?

It's possible there is a CD/DVD in the drive that's stuck. Open Disk Utility in Applications/Utilities. Do you see a CD/DVD in the drive? Try ejecting using unmount.
If that fails, restart and hold down the mouse button whe restarting.
Other links:
Kappy's Five ways to eject a stuck CD or DVD from the optical drive https://discussions.apple.com/thread/4795807
Ds store's suggestion: Reboot the computer holding the option key down, wait for the boot drive options to appear, then press the eject key on the keyboard. When it's out, then select your boot drive and click the arrow key to boot up.
http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
Hope this helps!

My DVD drive won't open when I click the button

Hi there
I'm hoping someone can help me.
My DVD drive won't open when I click the button.
I've tried clicking on eject on the DVD Drive icon in My Computers and it comes up with an error message.
I think I deleted cookies the other day. Could that have anything to do with the problem?
Any help would be greatly appreciated as I really don't want to send my laptop away to a technician.

Hi
Try to open the CD/DVD drive manually.
Near the eject button you will find a small hole.
You could use a small object like staple and could push it carefully into this hole.
Usually this should helps to open the drive manually.

DVD drive does not close: Stays open whether there is a cd in the tray or not

I have a toshiba laptop:
Specifications:
Satellite Series: L305DS5881
Model: PSLC8U-00D010
Optical Disk Drive: TSSTCorp CDDVDW TS-L633P
I have had the laptop for a little over a year now and just recently the DVD drive will not close even when I have a cd in the tray. I have not reinstalled the operating system therefore have not ruled out that it is not an OS issue. Is there anything I can do to fix this issue?

Hi
In my opinion its a mechanical CD/DVD drive problem and you should contact the ASP in your country for a check.
I mean your warranty must be valid because this notebook does not seem to be old.
So ask the ASP and maybe the CD/DVD drive must be replaced.
Bye

Can I disable the button that opens my DVD Drive?

The button on my dvd drive is so sensitive that it's hard to touch the side of my T510 withou accidentally opening the drive. VERRRy annoying.
I'm loking for a way to disable the manual button.
Is there a solution for this?

I wrote LockCD application after giving up on finding a properly functioning software that would lock the CD ROM eject button which i hit quite frequently on my Lenovo T520 laptop. The main problem with the software found over the internet was that it wouldn't retain the lock state after Sleep/Resume. I made it freely available at http://sourceforge.net/p/lockcd/wiki/Home/

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

MacPro 2007 DVD Drive won't open

Lion 10.7.4
Pressing the Eject key on the keyboard does not open the DVD tray. Usually the Eject symbol appears briefly on the screen and then the tray will extend. But, this is not working at all. I've reset the PRAM, but still the problem persists.
Going to About this Mac shows that the system "sees" the DVD drive, I just can't the the tray to extend. There is no DVD or CD in the drive at this time.
Any suggestions are appreciated.
Thanks.

Hi Galb:
Sometimes the best solutions are the manual ones. There is a mechanical fail safe built in to these devices, I have had to use this method several times myself, so ....
..... Try this:
1) Power off your mac pro.
2) With your finger, pull down the metal bezel on the affected drive.
3) You should now see the front plastic bezel on the affected drive, it is usually black or grey.
4) Look for a small pinhole somewhere on the front. It will have a very small diameter, about 0.5mm.
5) Yes it's there, all cd/dvd drives have one! Note: a small flashlight comes in handy here.
6) Straighten out a standard paperclip for about 2 -3 inches.
7) Insert the paperclip in the small hole and push, you will have some resistance, and then the drive tray will slowly push out about 0.5 inches or more.
8) Grab the tray and pull it out slowly!!
9) You are done!
10) If you do this gently you won't hurt the drive. Boot up and the tray should automatically slide back in. You are good to go.

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

E440 CD/DVD Drive Won't Open

Hello. I bought a Thinkpad Edge E440 and it came yesterday. However the CD/DVD Drive won't open. If it do the paperclip trick, it will, but when I press the button it just makes a few noises and then nothing, if I right click the drive and press eject, same result. Any suggestions please?

reliablepctechs wrote:
obtain a paper clip, straighten it out and insert it in the small hole found on the bezel of the cdrom drive. Doing so mechanically releases the drive...
take reasonable care in doing so....insert it about an inch or so
I saw that you posted the suggested paper clip trick as a solution, but it does not work for me. my machine is a new (2011) hp. i do not think it matters that it is a bluray drive. any other hints would be hugely appreciated

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Imac dvd drive won't accept disks

My iMac's dvd drive won't let me insert any disks. It feels like there's something blocking the way in. The eject button on my keyboard doesn't seem to be working either – usually the dvd drive makes an 'ejecting sound' when the button is pushed, even when there's no disk. I've also tried some disk ejecting tricks found in this community. The dvd drive seems to be responding to nothing...

Try this:
Repairing the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
No guarantee this will work but it's a start.

MacBook CD/DVD drive won't read disc

I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
Is there a way to use Terminal to force it to read my data on the disc?
Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

The metal flap over the dvd drive won't close on my Mac Pro

Similar Messages

Maybe you are looking for