The mic volume is too high when calling with an earphone without mic

There are a common problem on the mic volume when calling with my earphone (TF-10 pro without mic). The mic volume seems like turned to speaker mode, so all the background sound has also captured. Therefore, I would like to clarify that it is a common problem or not.

nobody has the same issue with me？

Similar Messages

  • Muvo - volume is too high with new firmw

    Hi.
    I have a Muvo TX 52 mb with usb2.0, and when i upgraded the firmware to .3.something some months ago i got a problem:
    I cant decrease the volume enough with the new firmware!:angry: With the old firmware was volume setting "" very low, and the maximum volume wasnt very high. The new firmware has better mawimum volume but the minimum volume is too high... :-S Hope you understand what i mean.
    Today i tried the latest firmware again, .2.02, but its STILL too high volume!
    This is really driving me crazy, and propably i would need an OLD firmware (which is much worse in other ways), but i cant find any old firmware too download.
    Please help me. Thanks!

    I've mailed tech support now. If anyone has old firmware install, _please_ let me konwMessage Edited by muvotx on 07-03-2006 06:27 PM

  • "bit rate too high" in menus with overlay files

    Hi
    I opened in DVDSP4 a project I was working in DVDSP2.
    In DVDSP2 the project could build without a problem but now on DVDSP4 during build the program either gets stuck or gives the message "Muxer Bitrate Too High" when it reaches a menu with an overlay file (tiff or jpeg / advanced colors).
    I didn't add any new assets to the project, just used transitions between buttons and menus available in DVDSP4.
    As soon as I remove the overlay file, build continues succesfully.
    Anybody has an idea about why this is happening?

    Thank you for looking into this issue
    Here is something I tried out:
    I set the same file used for the overlay, as background image, and build was successful, which probably means that DVDSP can handle this type of file
    Ps. Originally the files were tiff (they worked fine in DVD studio pro 2)
    When the build problem started in DVDSP4, I converted them in jpeg but I had the same results.

  • Mic level too high when recorded, how to fix?

    I have an interview where the mic level has been too high when recorded.
    The sound is basically usable, it's not all rubbish, but how to fix this?
    I know there are tools for this, just don't know what they are.
    Thanks for helping.

    If the audio is clipped there's not much you can do other than re-record. But there is this: http://www.izotope.com/products/audio/RX/
    -DH

  • Error Rounding Difference too high when reset cleared document using FBRA

    My Client has posted cleared document with T_Code F-51. This cleared document has cleared 6040 open items.
    And now, they want to reset and reverse that cleared document.
    We found error "Rounding difference too high" when we are reset cleared document using FBRA.
    Kindly need your advice.
    Many thanks in advance.
    Regards,

    Hello,
    Please let me know the ERROR number.
    Regards,
    Ravi

  • I have a record player hooked up through the audio port.  The input volume is registering high, but there is no output anywhere.  Help?

    I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input".  The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere.  Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

    keithstopher,
    You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
    You may want to check into something like the following, there are may out there, see what fits your needs best.
    http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
    Hope this helps

  • When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

    I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
    Below is my iMac settings.

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • The XML document builds on itself when called twice. Help!!!

    When I run the Sample program for the Oracle classgen for Java
    the XML document node repeats itself when called the second
    time. This is what I mean:
    import oracle.xml.classgen.*;
    import oracle.xml.parser.*;
    public class TestWidl
    static WIDL w1 = new WIDL();
    public static void main (String args[])
    test();
    test();
    static void test ()
    try
    DTD dtd = w1.getDTDNode();
    w1.setNAME("WIDL1");
    w1.setVERSION(WIDL.VERSION_1_0);
    SERVICE s1 = new SERVICE("Service1", "Service_URL");
    s1.setINPUT("File");
    s1.setOUTPUT("File");
    BINDING b1 = new BINDING("Binding1");
    b1.setTYPE(BINDING.TYPE_INPUT);
    BINDING b2 = new BINDING("Binding2");
    b2.setTYPE(BINDING.TYPE_OUTPUT);
    VARIABLE v1 = new VARIABLE("Variable1",
    VARIABLE.NULLOK_FALSE);
    v1.setTYPE(VARIABLE.TYPE_STRING);
    v1.setUSAGE(VARIABLE.USAGE_INTERNAL);
    v1.setVALUE("value");
    VARIABLE v2 = new VARIABLE("Variable2",
    VARIABLE.NULLOK_TRUE);
    v2.setTYPE(VARIABLE.TYPE_STRING1);
    v2.setUSAGE(VARIABLE.USAGE_HEADER);
    VARIABLE v3 = new VARIABLE("Variable3",
    VARIABLE.NULLOK_FALSE);
    v3.setTYPE(VARIABLE.TYPE_STRING2);
    v3.setUSAGE(VARIABLE.USAGE_FUNCTION);
    v3.setMASK("mask");
    CONDITION c1 = new CONDITION("CRef1", "CMatch1");
    c1.setSERVICE("Service1");
    c1.setTYPE(CONDITION.TYPE_SUCCESS);
    CONDITION c2 = new CONDITION("CRef2", "CMatch2");
    c2.setTYPE(CONDITION.TYPE_RETRY);
    CONDITION c3 = new CONDITION("CRef3", "CMatch3");
    c3.setSERVICE("Service3");
    c3.setTYPE(CONDITION.TYPE_FAILURE);
    REGION r1 = new REGION("Region1", "Start", "End");
    b1.addNode(r1);
    b1.addNode(v1);
    b1.addNode(c1);
    b1.addNode(v2);
    b2.addNode(c2);
    b2.addNode(v3);
    w1.addNode(s1);
    w1.addNode(b1);
    w1.addNode(b2);
    w1.validateContent();
    w1.print(System.out);
    catch (Exception e)
    System.out.println(e.toString());
    e.printStackTrace();
    The XML output looks like this:
    First Call to test():
    <?xml version = '1.0' encoding = 'ASCII'?>
    <!DOCTYPE WIDL SYSTEM "file:/home/hmiranda/tmp/WIDL_dtd.txt">
    <WIDL NAME="WIDL1" VERSION="1.0">
    <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    OUTPUT="File"/>
    <BINDING NAME="Binding1" TYPE="Input">
    <REGION NAME="Region1" START="Start" END="End"/>
    <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    USAGE="Internal" VALUE="value"/>
    <CONDITION REF="CRef1" MATCH="CMatch1" SERVICE="Service1"
    TYPE="Success"/>
    <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    USAGE="Header"/>
    </BINDING>
    <BINDING NAME="Binding2" TYPE="Output">
    <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    USAGE="Function" MASK="mask"/>
    </BINDING>
    </WIDL>
    Second Call to test:
    Please note how service1 repeats itself. I would expect that
    the XML string would look like the first output:
    How can I fix this??
    <?xml version = '1.0' encoding = 'ASCII'?>
    <!DOCTYPE WIDL SYSTEM "file:/home/hmiranda/tmp/WIDL_dtd.txt">
    <WIDL NAME="WIDL1" VERSION="1.0">
    <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    OUTPUT="File"/>
    <BINDING NAME="Binding1" TYPE="Input">
    <REGION NAME="Region1" START="Start" END="End"/>
    <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    USAGE="Internal" VALUE="value"/>
    <CONDITION REF="CRef1" MATCH="CMatch1" SERVICE="Service1"
    TYPE="Success"/>
    <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    USAGE="Header"/>
    </BINDING>
    <BINDING NAME="Binding2" TYPE="Output">
    <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    USAGE="Function" MASK="mask"/>
    </BINDING>
    <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    OUTPUT="File"/>
    <BINDING NAME="Binding1" TYPE="Input">
    <REGION NAME="Region1" START="Start" END="End"/>
    <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    USAGE="Internal" VALUE="value"/>
    <CONDITION REF="CRef1" MATCH="CMatch1" SERVICE="Service1"
    TYPE="Success"/>
    <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    USAGE="Header"/>
    </BINDING>
    <BINDING NAME="Binding2" TYPE="Output">
    <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    USAGE="Function" MASK="mask"/>
    </BINDING>
    </WIDL>
    Any Help is appreciated.
    Hector.
    null

    Hector Miranda (guest) wrote:
    : When I run the Sample program for the Oracle classgen for Java
    : the XML document node repeats itself when called the second
    : time. This is what I mean:
    : import oracle.xml.classgen.*;
    : import oracle.xml.parser.*;
    : public class TestWidl
    : static WIDL w1 = new WIDL();
    : public static void main (String args[])
    : test();
    : test();
    : static void test ()
    : try
    : DTD dtd = w1.getDTDNode();
    : w1.setNAME("WIDL1");
    : w1.setVERSION(WIDL.VERSION_1_0);
    : SERVICE s1 = new SERVICE("Service1", "Service_URL");
    : s1.setINPUT("File");
    : s1.setOUTPUT("File");
    : BINDING b1 = new BINDING("Binding1");
    : b1.setTYPE(BINDING.TYPE_INPUT);
    : BINDING b2 = new BINDING("Binding2");
    : b2.setTYPE(BINDING.TYPE_OUTPUT);
    : VARIABLE v1 = new VARIABLE("Variable1",
    : VARIABLE.NULLOK_FALSE);
    : v1.setTYPE(VARIABLE.TYPE_STRING);
    : v1.setUSAGE(VARIABLE.USAGE_INTERNAL);
    : v1.setVALUE("value");
    : VARIABLE v2 = new VARIABLE("Variable2",
    : VARIABLE.NULLOK_TRUE);
    : v2.setTYPE(VARIABLE.TYPE_STRING1);
    : v2.setUSAGE(VARIABLE.USAGE_HEADER);
    : VARIABLE v3 = new VARIABLE("Variable3",
    : VARIABLE.NULLOK_FALSE);
    : v3.setTYPE(VARIABLE.TYPE_STRING2);
    : v3.setUSAGE(VARIABLE.USAGE_FUNCTION);
    : v3.setMASK("mask");
    : CONDITION c1 = new CONDITION("CRef1", "CMatch1");
    : c1.setSERVICE("Service1");
    : c1.setTYPE(CONDITION.TYPE_SUCCESS);
    : CONDITION c2 = new CONDITION("CRef2", "CMatch2");
    : c2.setTYPE(CONDITION.TYPE_RETRY);
    : CONDITION c3 = new CONDITION("CRef3", "CMatch3");
    : c3.setSERVICE("Service3");
    : c3.setTYPE(CONDITION.TYPE_FAILURE);
    : REGION r1 = new REGION("Region1", "Start", "End");
    : b1.addNode(r1);
    : b1.addNode(v1);
    : b1.addNode(c1);
    : b1.addNode(v2);
    : b2.addNode(c2);
    : b2.addNode(v3);
    : w1.addNode(s1);
    : w1.addNode(b1);
    : w1.addNode(b2);
    : w1.validateContent();
    : w1.print(System.out);
    : catch (Exception e)
    : System.out.println(e.toString());
    : e.printStackTrace();
    : The XML output looks like this:
    : First Call to test():
    : <?xml version = '1.0' encoding = 'ASCII'?>
    : <!DOCTYPE WIDL SYSTEM "file:/home/hmiranda/tmp/WIDL_dtd.txt">
    : <WIDL NAME="WIDL1" VERSION="1.0">
    : <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    : OUTPUT="File"/>
    : <BINDING NAME="Binding1" TYPE="Input">
    : <REGION NAME="Region1" START="Start" END="End"/>
    : <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    : USAGE="Internal" VALUE="value"/>
    : <CONDITION REF="CRef1" MATCH="CMatch1"
    SERVICE="Service1"
    : TYPE="Success"/>
    : <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    : USAGE="Header"/>
    : </BINDING>
    : <BINDING NAME="Binding2" TYPE="Output">
    : <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    : <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    : USAGE="Function" MASK="mask"/>
    : </BINDING>
    : </WIDL>
    : Second Call to test:
    : Please note how service1 repeats itself. I would expect that
    : the XML string would look like the first output:
    : How can I fix this??
    : <?xml version = '1.0' encoding = 'ASCII'?>
    : <!DOCTYPE WIDL SYSTEM "file:/home/hmiranda/tmp/WIDL_dtd.txt">
    : <WIDL NAME="WIDL1" VERSION="1.0">
    : <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    : OUTPUT="File"/>
    : <BINDING NAME="Binding1" TYPE="Input">
    : <REGION NAME="Region1" START="Start" END="End"/>
    : <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    : USAGE="Internal" VALUE="value"/>
    : <CONDITION REF="CRef1" MATCH="CMatch1"
    SERVICE="Service1"
    : TYPE="Success"/>
    : <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    : USAGE="Header"/>
    : </BINDING>
    : <BINDING NAME="Binding2" TYPE="Output">
    : <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    : <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    : USAGE="Function" MASK="mask"/>
    : </BINDING>
    : <SERVICE NAME="Service1" URL="Service_URL" INPUT="File"
    : OUTPUT="File"/>
    : <BINDING NAME="Binding1" TYPE="Input">
    : <REGION NAME="Region1" START="Start" END="End"/>
    : <VARIABLE NAME="Variable1" NULLOK="False" TYPE="String"
    : USAGE="Internal" VALUE="value"/>
    : <CONDITION REF="CRef1" MATCH="CMatch1"
    SERVICE="Service1"
    : TYPE="Success"/>
    : <VARIABLE NAME="Variable2" NULLOK="True" TYPE="String1"
    : USAGE="Header"/>
    : </BINDING>
    : <BINDING NAME="Binding2" TYPE="Output">
    : <CONDITION REF="CRef2" MATCH="CMatch2" TYPE="Retry"/>
    : <VARIABLE NAME="Variable3" NULLOK="False" TYPE="String2"
    : USAGE="Function" MASK="mask"/>
    : </BINDING>
    : </WIDL>
    : Any Help is appreciated.
    : Hector.
    Move
    WIDL w1 = new WIDL();
    out of test() and modify it as
    public class TestWidl
    static WIDL w1 = new WIDL(); ...
    and this will work.
    Oracle XML Team
    http://technet.oracle.com
    Oracle Technology Network
    null

  • Hi I can not pay chart in the program Seapilot, ITray too buy charts Call Sweden

    Hi I can not pay chart in the program Seapilot, ITray too buy charts Call Sweden

    Contact the developer about how to use their app. And how to buy in app purchases.

  • HD doesn't operate when the ambient temperature is too high

    Hi
    I've got an iBook 800 and the internal drive starts to click when the temperature in the room is a little, or so it appears. Is there any known issue with this?
    I think I am about ready to replace the drive but some insight would be great.
    I wouldn't want to throw away an otherwise good drive.
    Throw in your two cents.

    Alexander, some of the other threads here may offer some points to work through to check the actual status of the HDD - maybe it is on its way out?

  • KMDF Driver. What are the recommended limits for buffer size when calling WdfCommonBufferCreate

    Hi,
    I have a customer who wants to really stress-test his PCIe hardware. His idea is to declare two 8 GB buffers alternately filled by application software and fetched by scatter/gather DMA in the hardware (Transfer to PCIe card). If I calculate this through,
    this is a maximum of 2M scatter/gather elements per buffer or 32 MByte, assuming S/G element is 16 bytes. i.e. 64 MByte logically contiguous memory as a common buffer for storing the S/G lists. The test system will have plenty of memory, 32 G upwards.
    Still don't think I am likely to get a 64MByte common buffer from the system or even two disjunct 32 Mbyte buffers. If I look at poolmon on my server, the current size for NP is only 86M
    So I expect the driver will have to handle multiple calls to EvtProgramDma, each covering just part of the 8G to be transferred.
    Still I have two questions:
    1) Are there any recommendations, house numbers from experience etc. regarding what is a usable maximum size I can reliably get for a common buffer with a call to WdfCommonBufferCreate (percentage of NP pool?, absolute number? ...). The common buffer is
    for storing the S/G elements for the HW DMA controller
    2) If I just declare a huge array of SCATTER_GATHER_ELEMENT[4M] or 2x huge arrays SCATTER_GATHER_ELEMENT[2M] in the device context (to be managed later by WdfMemoryCreatePreallocated() etc.) , will windows refuse to load the driver because the driver footprint
    is too large?
    We are talking about Windows 7/x64
    Thanks,
    Charles

    Don,
    thanks for your reply. The card is always physically present in the test system which means I could load the driver at boot time, but it would have to be after PCIe enumeration of course.
    So far I have always managed to avoid writing a boot-start driver, my main objection being for "purist" reasons. I understand the MS documentation to mean that boot-start is really only intended for devices that are required to boot the system
    (disk, console, keyboard, maybe network ....). I am aware of the advantage of boot-start though, a much higher probability of getting contiguous memory in larger chunks. This driver however is definitely not relevant for system start. The add-in card is essentially
    a high performance source of test data and only runs when a SW application has been started.
    The card does have high performance scatter/gather DMA support also 64-bit addressing capability.
    I do wish Microsoft would issue some guidelines regarding realistic sizing of common buffers, it would make my discussion easier. Yes, I could write a test driver and measure it out but I don't really have time for that. Microsoft surely have test/application
    teams for figuring these things out.
    Charles

  • Error message Translational currency is too high when posting GR for a PO

    Hi,
    I am trying to post a GR for a PO,with document currency say in GBP and local currency in EUR,when i tried to post a GR the system gives the message with-"Translational currency is too high" and also the value updated for previous GRs(for a qty 10) is vary high like 37,056,361,610.68     GBP,just i want to know how this value is picked by the system,i know exhange rate table maintained is plays important role,but the value i am getting is too high which is not at all related with rates we maintained in the table TCURR.
    I want to know why system is giving such a high value.     
    further PO quantity is 17,000 and net price is 1 GBP.
    we have posted very sucessfull GR earlier,but now this high value and error in GR  we are facing.
    with regards,

    Hi,
    Good afternoon and greetings,
    Wishing you a Happy New Year 2007
    Please go through the following OSS Note
    Note 191927 - Posting logic: GR for foreign currency PO
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Video bit rate too high when try to build and burn.  Audio is AC3

    I am trying to burn a dual layer DVD and when I go to build/format the DVD it says that the video bit rate is too high. I am confused by this because this DVD was burned previously without a problem. Changes had to be made to the project and the files were compressed in compressor with the same settings and now they do not work. The audio is AC3 dolby. Is there some setting that needs to be changed in DVDSP? What am I missing here...
    I am using FC Studio 2.
    Thanks!
    Natalie

    I don't know exactly what the total length of the video is in minutes, but I do know that it is 6.8GB for a dual layer. Probably at least 3 hours. I don't know what the target bit rate is? Is what you are referring is to what the compression I used in compressor?
    I am using the setting DVD Best Quality 150 minutes 3.7mbps for video and the AC3 for the audio.
    I am recompressing all the videos again just in case there was a problem with one of the compressions. I don't understand why it isn't working this time when none of the settings or compression had changed.
    Thanks!!

  • S10 noise level too high when closed

    HI,
    I just unpacked a new S10 6423 47G. I was startled by the noise level from the start and now that after completion of the windows setup the noise level has not gone down(I has hoping for a fan control issue), I have stopped further installation and am wondering what to do next.
    The three fans seem ok and fairly quiet, I think the installation of the hard drive is also nicely solved.
    When the unit is open the noise level is nothing great but ok. As soon as I put the side panel on, I have an increase in noise level that brings me over the tolerance treshold. 
    I am not sure about the reason, the panel is quite loose but when I press on certain or all parts there is no change in sound. It seems there is resonance in the entire case when I install the side panel. It starts even when the panel is not completey vertfical. In addition to the general noise level there also seems to be resonance of other frequencies as from time to time there is a humming with a frequency of a few changes a minute. 
    I am really disappointed, the "quiet like whipser noise level" (or so the ad went) was the thing that made me buy this computer without thinking much either about specs or price, I just wanted a reasonably quiet computer.
    Any advice?
    ThanksM.

    Dear Brian,
    thanks a lot for your info. I am relieved to see that the noise level is acceptable with your machine. That gives me hope.
    FYI, I contacted Lenovo Germany and they were polite but not too helpful, they said that naturally this computer should be louder than a normal pc and did not want to hear much about the way the system is advertised as ultra-quiet. I do not believe in advertising promises but a moderately decent noise level i do expect.
    I will return this unit to the dealer and order a new one - hoping that this is only a singular experience.
    For me  it is not an option to be unhappy with Lenovo - I like the Think series a lot and buy their notebooks all the time for business..
    M.

  • The problem by hearing my voice when calling from iMAC

    I use the latest version of OS X and iOS on all my devices (OS X and iOS 8.1.1 10.10.1). The receiving calls through iPhone 5 have a problem with hearing my voice when calling from iMAC. When make incoming, but also outgoing call through iPhone5 on my iMac, I can hear the caller, but he can not hear me, although tilde see sound when I speak to your iMac.
    When the call using my iMac I can hear the caller, but he's not me.
    MacBook Air while everything works smoothly, there hear me. You do not know me with this please help?
    Thanks

    Yes, my microphone works correctly, f.e. skype, record spund for my videos... no problem with microphone on my iMAC

Maybe you are looking for