The minimize function for Chrome is not working

Hello everyone,
since yesterday the yellow round icon (which allows you to minimize the window) on Google Chrome it turned grey and it's not working anymore. Also all the other ways to minimize windows are not working.
This is happening only with Chrome, and when I'm working with it the dock disappear...
How do I restore the minimize function for Chrome?
Thank you,
Silvia

I'm using 10.7.2. When I highlight some words, the highlight turns into a colored oval! The PDF file is from a vendor.

Similar Messages

HT204003 What can I do if the "date" fix for passbook is not working? Are there any other solutions?

I have tried the "date" fix but it does not work for me. Does anyone have any other solution for the passbook problem?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

SocialCast Bookmarklet for Chrome is not working (it does on Firefox and Safari) - Can someone help me with it

Building a community on Socialcast, and I am a Chrome browser user. The bookmarklet bar doesn't work for my version of Chrome - I do not see any pop up blockers or other issues.
Let me know what are my next steps (other than using Firefox of Safari).

Hello:
Thanks for reporting this issue. We were able to confirm the fact that the bookmarklet is in fact broken in chrome, but does work in firefox and safari (which it sounds like may not be helpful to you). We will raise a ticket with our engineering team.
Best,
The VMware Socialcast team

SetVisible() function for JDialog is not working on Macintosh machine

Hi All,
I have coded 2 dialog boxes and i m making only one dialog box visible at a time and using threading.
But using setVisible() function works fine when I am running that code on windows platform; while when I run on macintosh machine this is not working.It seems as i setvisible() is not executing at all on macintosh machine.
I am using jdk1.5 on both windows as well as on macintosh.
Tell me if there is some other method to make dialog boxes/frames visible/invisible.
Waiting for reply
Thanks

Since you mentioned that you're using threading, I have to ask: have you ensured that setVisible is called on the EDT, possibly by wrapping it in a SwingUtilities.invokeLater ?
db

ICal: 'Open in Address Book' Function for 'Attendees' does not Work

iCal lets you drag a Contact from Address Book to the 'Attendees' field of an iCal Event. (You can also put the information into the field by typing the first few letters of the person's name, and Address Book will automatically populate the field with contacts containing those letters.) When you click on a contact in 'Attendees' and select 'Open in Address Book', it is supposed to open the contact's information in Address Book (in case you needed their phone number, forgot their wife's name, etc.). In the previous version of iCal, this ALMOST worked; it would find someone in Address Book, but it would be the first person in your Address Book list with that first name; not always the person you wanted.
The problem now is that when you click on a contact in 'Attendees' and select 'Open in Address Book', it simply opens the Address Book application and stops there; it does not go to the contact's data in Address Book. I sent Apple feedback on this problem 3 years ago, and again a few months ago, but it still does not work correctly. Does this work correctly for anyone?

Mine actually performs the sync, but after a few rounds of syncing, some contacts get deleted, some get their photos removed, some get duplicated, and some get removed from groups. The sync basically puts my address book through a blender. I'm syncing both with MobileMe and Google. Well, that is I tried to. I've decided not to sync with Google since that's what seems to initiate the mess.

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

The Web Agent for IIS will not work

Environment: NT4 Server, IIS4
I try to install the Web Agent in use with IIS but IIS fails to load the dll. After the installation I can read the event-log :
The HTTP server was unable to load the ISAPI Application 'C:\Oracle\Ora81\ord\web\bin\wsciis81.dll'. The data is the error.
And the Browser gives me:
A dynamic link library (DLL) initialization routine failed.
What can be wrong?

Note: On Windows NT, use \ instead of / to separate file system directory
paths.
1. Check the Web Agent's log file.
Look in <oracle_home>/ord/web/logs for a log file in the form
wsc_<yyyymmdd>_<pid>.log. If the file exists, review it for errors,
then take the necessary action to remedy the problem. Possible
problems that might be logged are non-recoverable errors in the Web
Agent's configuration file <oracle_home>/ord/web/admin/wsc.cfg. If the
configuration file or the <oracle_home>/ord/web directory hierarchy
doesn't exist, then re-do the installation.
2. Check the Web Agent's "last-chance" error log file.
If the <oracle_home>/ord/web/logs directory exists, but there are no
log files, check in the %SystemRoot% directory on Windows NT or the
/tmp directory on Unix for a file named wsclstch.err. This is the Web
Agent's "last-chance" error log file. The Web Agent will try to write
to this file if it encounters a fundamental startup error, such as a
problem initializing CORE or NLS, creating a log file, or opening its
message file. If the file exists, review it for errors, then take the
necessary action to remedy the problem. (In a command window on
Windows NT, type set SystemRoot to find where the wsclstch.err file
would be written.)
3. Check the web server configuration.
If the Web Agent failed to create either its normal log file or its
"last-chance" error log file, verify that the Web Agent has been
configured correctly for the particular web server being used and that
the web server is running.
o Microsoft IIS
Use the Internet Service Manager to verify that IIS has been
configured correctly for the Web Agent. Review the installation
and configuration instructions in the wsciis.html or wsciis.txt
files to verify that the Web Agent has been configured correctly
and to make any changes or fixes necessary. Check that the filter
is up and running and that the virtual path has been configured.
To check the filter, select the web site, then click the
properties button (or right-click the web site icon). Select the
Filters tab. The Web Agent should appear in the list with a green
up-arrow. If it appears with a red down-arrow, check the Windows
NT event log for any errors relating to the Web Agent. IIS
doesn't always write detailed error messages. For example, if a
DLL used by the Web Agent can't be located, then IIS typically
logs the fact that a load error occurred along with the message
"the data was the error". Note that the installation and
configuration instructions describe the case where the filter
must be installed manually if there were no existing filters
registered at the time the Web Agent for IIS was installed.
If the filter looks OK, check the oracle_intermedia_bin virtual
path by clicking the properties button (or right-click the
virtual path icon). The path should reference the
<oracle-home>\ord\web\bin directory, which should contain the
wsciis81.dll file. In the properties window, select the directory
security tab, then click the anonymous access and authentication
control button. Verify that Basic authentication has been checked
and that Windows NT challenge/response has been cleared.
To function correctly, the Oracle8i home must be specified
correctly for IIS. Use the Oracle Home Selector to verify that
the Oracle8i home is specified as the default home. Use the
System Control Panel to verify that the Oracle8i home /bin
directory is specified prior to any other Oracle homes in the
PATH environment variable.
null

Reading list for Chrome extension not working...

I installed ICloud for Windows and the extension for Chrome. I can see my bookmarks in Chrome are working fine, but no sign of my reading list.
Has any one made this work?
Thanks in advance

Hi Felipe Rodrigues,
If you are having issues with the iCloud Reading List in Chrome, you may find the following article helpful:
iCloud: Troubleshooting iCloud Bookmarks and Reading List
http://support.apple.com/kb/ts4001
Regards,
- Brenden

Why is the Pages app for iPad Mini not working?

For the last few days I have been having major issues with the word processing application Pages for the iPad. It is taking a very long time to show me my documents, then it takes just as long to open up documents. Then when it finally opens up the document I have selected; the entire functionality is extremely slow and sluggish.
I turned the iPad on and off several times to see if that would help. I deleted the pages app. I even freed up some extra space on the iPad. None of these things have resolved anything.
If it is at all relevant I am using the most recent version of Pages (especially since I re-downloaded it). I am also using the latest version of iOS 8 on the iPad. My iPad is synched to iCloud. I have a maximum storage capacity of 20 gb (to which I have only used 675 kb). I am using the first generation iPad Mini (which is the very first iPad mini)
What could be the problem?
Should I reset the factory settings of the entire iPad? I'm at a loss of how to resolve this.

The problem may be due to slow internet access to icloud where the document is being stored and saved.
Try creating a new document which is not on iCloud to see how the performance is.

Enabling the wiki service for a group not working

Hey all,
I am getting my server up and running and I have the following services: AFP, DNS, and Web. I am currently trying to enable the use of a Wiki but am running into some problems. I have enabled Wiki and blog in the Web Services in Server Admin and I have added the groups I wish to be able to use the Wiki. When I go to Workgroup Manager, I get stuck. In the Accounts tab and the group I am trying to give access to, I attempt to use the pulldown tab to "Enable the following serves for this group on:" I would like to get the pulldown to be set on "Default web site of server17.pretendco.com, but I cannot even use the pulldown. It is grayed over, and I cannot change the settings.
I am using the Administrator account, so I should be able to change that. Any ideas?
Thanks
Pat

Hi
The reason the option is grayed out for your users is because your server is not an OD Master. Wiki, Blog and iCal won't be available unless this happens first.
Page 61 Web Technologies Admin Manual
Wiki will not work without a local Open Directory master. Your server can be connected
to another directory server simultaneously, but for wiki to work, your server must be an
Open Directory master. For more information, see Open Directory Administration.
You can download the relevant manuals from here:
http://images.apple.com/server/macosx/docs/WebTechnologies_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/OpenDirectory_Admin_v10.5_2ndEd.pdf
Other manuals may also be of use:
http://www.apple.com/server/macosx/resources/
Open Directory requires a tested and configured Internal DNS Service resolving on the forward and reverse lookups. DNS does not need to be running on the server itself just as long as it is running on a server on the same network. Don't confuse internal DNS Services with the external ones you are used to.
Tony

Peak detection function for sawtooth waveform not working properly

I am using peakdetector function for finding peaks in a sawtooth wave. The peaks it detects is 2 units higher then the actual peak. But when i do the same thing for sine wave it detects the peaks properly.
Can anyone please tell me why am I having this problem and how to resolve it? Any help would be greatly appreciated. Thanks in advance

With that line i got a sawtooth wave having 10 cycles. It dtects all the 10 peaks but at an amplitude 2 units higher the the actual peak. I have attached a picture of what I got...
Attachments:
sawtooth.jpg ‏206 KB

File-renaming functionality for book does not work as expected

Adobe Framemaker 8.0
I am on Windows XP. Dell computer. Xerox printer.
I follow the basic instructions for renaming a file in a FM book (To change the name of a document in a book:
1. In the book window, select the file you want to rename, and then choose Edit > Rename File.
2. Type the new name of the file and press Return or Enter. When the alert message appears, click OK to update other files in the book.) but I do not get past step 1. Instead an error message comes up that says "The text cannot be changed. To change the name of this file, please display filenames."
What is meant here by "filenames" and how/where would one display such?

Thank you indeed! I was with your help able to rename the file. However, the Book Error Log barked at me that it couldn't open BadFileName (a reference not to the file I renamed but another file which I not so elegantly dubbed "Conten ts" (with an unintended space between "n" and "t"--maybe this spacing is the reason behind its being dubbed bad?) since it could not be found. Should I disregard the error message or play along and rename "Conten ts" to "Contents". If that's all I need to do to get rid of the error message then of course, I'll do it. Thank you for answering my last question--whether or not you answer this one. Cheers, Siobhan

After i made update to ios system the auto brightness for screen is not working any more although i am turning it on

Before i make update the auto brightness was working properly
The screen was very low bright in the dark automatically and high bright in light
But now after i made update it is nit working
I am surprised that apple system is not stable
Please support
<Email Edited By Host>

This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

The new update for iTunes is not working

so i tried to open the imovie app but instead it brought me to the app store and showed me that i needed to update itunes. I did the update and it restarted my computer but the i movie ico is still biring ing me to the app store and it is still telling me that is need to update itunes. please help

What do you mean? More info on what you are experiencing, please. We can't see your Mac screen...
GB

Repost Function using Variable is not working

Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
Teri

Ravi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri

The minimize function for Chrome is not working

Similar Messages

Maybe you are looking for