The MRP parameters are not maintained in plant JK01

Good morning,
t-code : md04 (stock req.list) but got an error.
MRP parameters for plant 'JK01' have not been maintained
Message no. 61273
Diagnosis
The MRP parameters are not maintained in plant JK01.
Procedure
Maintain MRP parameters in Customizing.
how to maintained mrp parameter fro plant JK01 ?
Thank you.

Hi Robert,
First maintain the plant parameter using tcode OMI8 for the plant JK01.
this will solve ur issue.
hope it wud have answered ur question
reward if useful
shawn

Similar Messages

Error: Control parameters are not maintained in the current client

Hi,
We have recently installed IDES IS-H 6.04 - HEALTH CARE. In the SAP easy access menu when I go to Hospital>>Basic data administration>>Hospital structure>>Organizational Structure>>Organizational Unit>>Create it throws the following error message
"Control parameters are not maintained in the current client"
Any help on this would be greatly appreciated. I can't move ahead without getting to create an OU.
Warm Regards,
Prasoon Singh

Hi Prasoon
Are you starting from scratch?
Was the client created after the activation of IS-H?
For new installation I always recommend to activate the industry solution in client 000 and then to create the new clients as copy of 000. It will bring you the configuration of the Institution 0001. If not, it's very hard to do all the customizing, specially the SD ones.
It seams that you have nothing configured, try to do the copy, if not, probably an entry in transaction ON05 is missing.
I hope it helps
With best regards
Matías

The page parameters are not showing in the URL .

I my appliaction all the pages have textboxes with some values . But the URL for none of the page shows the parameters like every page has url :
http://127.0.0.1:8080/apex/f?p=105:8:598450314306501::NO:::
but none of the page parameters are being shown . What is the problem here
please help

You can setup a page branch that responds to your specific button and within that branch definition you can specify page items and values to be set when that branch fires.
Is there a specific reason that you want the values passed on the URL? That's not really required to make ApEx function properly.
Earl

SSRS,MDX- Passed parameters are not hitting the main query in Dataset

I have created a SSRS report which has to accept two parameters i.e., store name, Date(to show sales on particular date) in report. which are working fine for me. but, those passed parameters are not hitting the main query in main Dataset. what ever i
pass in parameters, it is displaying all the rows(every city values). i think i am not correct in creating the statement in Main dataset query, to receive those 2 parameters into the main query. can anybody please help me how to create the statement
in main date set to display the results for the exact parameter i am passing(which has to be in MDX).
ram

Hi ramprasad74,
According to your description, you want to use parameter in the report, then after parameter values are selected, corresponding data will be displayed in the report. But the parameters do not work and all the rows are displayed.
To pass parameter to main report dataset, we need to define parameter for MDX query and assign parameter name same as SSRS report parameter. For detail information, please refer to the following steps:
Create a Dataset to retrieve data for Store name parameter.
Create Store name parameter, type name and prompt, set Date type to Text, check Allow multiple values check box, then select get values from the dataset.
Create a Dataset for Date parameter.
Create Date parameter, type name and prompt, set Date type to Date/Time, then select get values from the dataset.
Create a new dataset used to retrieve data for the report, add statement like below to the mdx query: {STRTOMEMBER(@Date)} * {STRTOSET (@Store_name)}.
In Query Designer pane, click Query Parameters and assign parameter name same as SSRS report parameter.
For more information about SSRS Report with Single and Multi Selection Parameter using MDX Query, please refer to the following blog:
http://www.codeproject.com/Articles/799265/SSRS-Report-with-Single-and-Multi-Selection-Parame
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

The Informatica maps are not taking the parameters from dac

Hi All,
The Informatica maps are not taking the parameters from dac. We have tried setting the parameters at DAC level, task level. The parameter file is getting generated by DAC and has correct values as we expect. But when we run a full load from DAC, the initial date in Informatica is being taken as 1/1/1753. Do we need to specify the parameter file name at workflow level?
Is there any setting that we are missing. Please guide us and let us know the steps we should take to make sure that the parameters that we set at DAC level get passed to the Informatica maps. Also mention this is happening only with dates and other parameters like data source num , soruce and target database information is getting passed to Informatica maps.
The version of Informatica as 7.4.1 and dac version AN 328, Build date Aug 8 2007.
Please Help me in this issue.
Thanks in advance for all members.

Hi Ananth.v
Try to make sure that your parameter file's path in Infa is in-sync with the path of DAC files being generated.
The date you are getting seems strange - which are your Source/Target DB platforms?
In general take a look at [this thread| http://forums.oracle.com/forums/message.jspa?messageID=3405906#3405906] , it may make some thing clearer for you.
Hope it helps,
Please post if you found a solution,

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver.

Material not maintained in plant P100

while adding material using MB1C T-Code i m getting bellow error
Material "bicycel" not maintained in plant P100 and if i press again getting another message
parameter for plant P100 not maintained in inventory management

Hi
Check whether the plant parameters have been maintained for your plant under Inventory management and Physical inventory
If not pl maintain the same in SPRO
Then U will not get the error
Hope you are clear on this.
Regards
Vijay

Scheduling parameters are not defined for production orders

Hi All,
when i convert the planned order to production order i got this massage popup coming Scheduling parameters are not defined for production orders . please let me know this .

Hi,
One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
Regards.

Parameters are not created for M0001 feature

Hi Friends,
During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
Edited by: sharada vemula on Apr 4, 2010 11:31 AM

Hi,
Go to PE03 enter M0001
create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
Hope this helps
Ajay

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Some parameters are not shown in parameter dialog

Hello,
I created a VB.NET program using VS2005 sample.
When the program refers to CR10's DLLs (VS2005 bundle),
it prompts all parameters correctly.
But when the program refers to CR12's DLLs, some parameters are not prompted.
I installed merge module 12.2.
I also checked CR11 (merge module 11.5) and found the result is equal to CS12.
Thank you

Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

GR and GI for the Subcontracting PO are not aligned

Hello,
We face an issue were the posting dates of the
GR(101 mvt) and GI(543mvt) for the Subcontracting PO are not aligned (GR takes
the posting date as the next day and GI as the current date).
We did an initial analysis and found that it is
the user time zone that leads to the different posting date. The user who does
the GR has a time zone setting of UTC+8 maintained in her user profile.
Whenever the user does a GR for the Process Order after 18:00CET, system
proposes the posting date for GR asthe next day. But GI picks the current date.
As per subcontracting scenario, the GI(goods issue from subcontracting stock)
happens whenever we do the GR. We understand that time zone has an effect on GR
posting date but the question is why GI posting date is not affected? Is it a
standard SAP behaviour?
Procedure -
We create the Process order via COR1 transaction,
In the master recipe we have maintained the control key for the subcontracting
operation.
Purchase Requisition will be created from the
Process Order. This PR is converted to Subcontracting PO via ME21N. The
delivery and PGI is done
via ME2O transaction. We have a custom transaction
to do the GR similar to MIGO transaction.

Hi Manikumar,
Empty the Personal time zone for the specific user & test the same. As by default, system time is maintained in UTC time zone.
Thanks,
Nihar

RFC Function Module - Message Reference parameters are not allowed with RFC

Hi,
Ive checked the Remote-Enabled Module radio button, declared Import and Export parameters using Type typing and checked the Pass Value in export and import parameters but I still receive message Reference parameters are not allowed with RFC and not able to activate the function module.
Am I missing something?
Regards,
...Naddy

Hi all,
I faced the same problem and solved it ,
You have defined a reference parameter for a remotely called
function module. However, only value parameters are allowed
for this type of module.
Procedure
Change the reference parameter to a value parameter.
Guys pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
Regards
Krishna Acharya

Parameters are not Passed in a Struts(JPDK) Portlet

Dear All,
I am getting below problem in Oracle Portal Environment(10.1.2)
I am passing news_id parameter along with title from one page to another page like below code
In CompanyNewsShowPage.jsp
<tr>
<td class="desc">
<%
page_url ="/showpageNews.do?news_id="+com_events[0];
// System.out.println("value of page url : "+ page_url);
%>
<input type="hidden" value="<%=page_url%>" id="hdnpageurl"/>
<pdk-html:link page="<%=page_url%>" styleClass="desc">
<%
String obj_title= com_events[1];
if((obj_title.length())>30)
out.println(obj_title= obj_title.substring(0,15)+ "...");
else
out.println(com_events[1]);
%>
</pdk-html:link>
</td>
TO passing
shownews.jsp
The code for accepting parameter is below
<%
System.out.println("value of newsid :"+ newsid);
String news_id=request.getParameter("news_id");
if(news_id !=null)
newsid= Integer.parseInt(news_id);
System.out.println("value of newsid :"+ newsid);
%>
Kindly any one help me how to pass the parameter from one page to another page above problem, because our go live date is very close.
But same code it is works in IE browser, but not working after deployed in Oracle Portal Environment.
However, the
parameters are not passed from the form to the Struts action. When retrieving the parameters, then
a null value is retrieved, even when the parameter was specified in the form.
Regards,
Chandrashekhara
Message was edited by:
user487286
Message was edited by:
user487286

Hi Anton,
I make some tests and it appeared that it's only the output parameter which is not passed through the step (why ?).
I get this output parameter by a post-running action which parse the joblog and retrieve the sequence number at the line with the pattern "vendor" (hereunder) :
100601 20091008 00 516 Job started 0
100601 20091008 00 550 Step 001 started (program ZCO_MANAGE_FILE, variant ECLO2, user ID ABAPUSER) 0 001 ZCO_MANAGE_FILE ECLO2 ABAPUSER
100601 20091008 00 001 No vendor specified 0 00233
100602 20091008 00 517 Job finished 0
Here is the postrunning action script wich was working before we upgrade :
JobFile log = jcsJob.getJobFileByName("log");
if (log != null)
    com.redwood.scheduler.api.search.SearchResultSet myResultSet = log.search("No vendor specified");
    com.redwood.scheduler.api.search.SearchResult myResult = null;
    while (myResultSet.next())
      myResult = myResultSet.getSearchResult();
      String [] line = myResult.getLineText().split(" ");
      JobParameter jp = jcsJob.getJobParameterByName("VendorCode");
      if (jp != null)
        jp.setOutValueString(line[line.length-1]);

The MRP parameters are not maintained in plant JK01

Similar Messages

Maybe you are looking for