The MSI FX5900XT has a cut down memory bus?

According to MSI's VGA product list the MSI FX5900XT has only a 128-bit memory bus. Is that a typing mistake? --because the FX5900XT benchmarked on Tom's Hardware has a 256-bit memory bus.
Tony.

It Must be a Typo, as there is No Way that NVIDIA would Let one of their Licensed Card Manufacturers even MSI, Cripple the Reference Design like that ......Chopping some Memory and Core Speed off of a Referece Card Design is one thing, But Changing the Whole Memory Pipelines Archetecture............Sean REILLY875

Similar Messages

I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account? Why not just change the e-mail associated with the old account?

My iPhone is about 6 months old now and I would say I don't use it that much. Yet for the last month or so the battery life has been going down and today after having charged it to 100% this morning, it was at 5% at 4 pm this aft. help!!

my iPhone is about 6 months old now and I would say I don't use it that much. Yet for the last month or so the battery life has been going down and today after having charged it to 100% this morning, it was at 5% at 4 pm this aft. help!!

Ok Fellas, let me give you a clue: Games, particularly those that make heavy use of graphics and sound are notoriously power hungry. In fact, when I was in the Navy many years ago, the folks working on the NTDS (Navy Tactical Data System) computers used a version of Space Invaders to load test the AN/UYK-43 computers.
I have also noticed that all of my laptops (I have a brand new Toshiba dual core, an older Toshiba single core, plus 2 Dell dual core machines) have significantly shorter battery life when I play Company of Heroes than when I am just reading e-mail or surfing the 'Net. I have also noticed the same behavior when I play games on my 4th gen Touch and my iPhone 4.
The fact is, iOS 5 did make some major improvements as well as adding some nice functionality like iMessage, wireless synch, and such, but the down side is that depending on how you use the device battery life can be shorter that what you may have experienced with pervious versions of iOS. Its just the nature of the beast...
We now return you to our regularly scheduled programming.....
Oh John.... Oh Marsha.....

Does the MSI P965 Neo-F support ECC memory?

Can it handle 2x 1 GB DDR2 ELPIDA PC2-5300, 667 MHz, ECC
Does the MSI P965 Neo-F support ECC memory?

As mentioned by many, No ECC RAMs support.
To me, I feel that current state of art DDR II RAMs are good enough to not produced much errors and HDDs have error buffer memory of up to 16MB, so ECC makes me feels that it is a "good to have but not a must" thing nowdays.

The last pin has been broken down .

The last pin in the charger slot (placed in my ipad) has been broken down but the device still charging well .
My question : does this pin effects the device or even the battery life cycle ?
What should I do in such case ?
Regards.

Thanx for answering my device is charging and is recognized by iTunes too but are you sure that this broken does not effect the device ? Will it cause any problem in the future ? Are you sure that the 32 pins are not used all because there were another post about such case. In that case the problem was stated that the iPad doesn't charge for more than 92 percentage and the answer for that's problem we're is the PIN number 30 has been broken. So I think that all the 32 pins are being used .

MSI Geforce 8800GTX 768mb OC Edition memory bus

In the nvidia control panel the memory bus (Factory shipped clock frequencies setting) is set to 1000 instead of 2000! Core bus is normal to 610. I also realized that if i increase the memory speed it goes only up to 1200? Remember, this is the OC Edition! Any suggestions? (Drivers installed: 162.22 vista 64bit)

Quote from: flobelix on 20-July-07, 03:32:33
Well... NO! control panel shows real clock 1000mhz, that's 2000mhz effective ( 1000mhz DoubleDataRate = 1000 x 2 = 2000!). So don't worry everything's ok.
Thanks man!

What has happened to my mozilla if the home page has been shrunk down and all the content has gone to thumbnails? Plus I have no tool bar at all

I was looking at a u tube video when all of a sudden when I tried to click the video off, the cursor started creating a circle around it and was moving all over and before I knew it, the google home page has shrunk down to a very small size all of the google eg web, video, etc details are in very small thumbnail rows on the left top of the screen and my tool bar is completely gone

Try [[How to clear the cache|clearing your cache]] that may well solve the problems on web content.
To get the tool bars back use Alt or F10 in your keyboard, then View -> Toolbars
* you will probably be able to just click on the relevant toolbar option such as the navigation toolbar to get it back
* if that fails you may need to consider the customise, and either drag items back, or restore the defaults
See also [[Back and forward or other toolbar items are missing]]

In multicam editing Im cutting a part and the audio is staying. The video part has been cut, but the original audio continues to play. I made several similar edits earlier and had no problems. Please help!! Thanks

Im using a multiclip as well. All volumes on cameras have been muted. The source of audio is pulling my hair out!! Thank you O Smart ones!

Absolutely nothing to do with top or bottom or whatever order they're set in the angle editor, though it's practical to set the audio at the bottom as you're not going to be cut, but it can be anywhere. In can bet in the middle if the stack. What is import is what is the active angle when you edit the clip into the timeline. You can change it afterwards, but it's easiest to do when you first make the edit into the timeline. In the angle viewer you set the active angle. That's what gets edited into the timeline as the first cut.
This is the angle viewer.
Cam 2 is the active angle. When it's edited into the timeline that's the video and audio that appears. In your case you would set bounce as the active angle. You can change the video in the timeline after you set the angle viewer to cut or switch video only. Then bounce remains as the audio.

ITunes Stores featured apps for ios 6 has been cut down in half on every category

Recently I notice that itunes apps store for ios 6 was not displaying all the apps like it was before. Itunes stores now only show few apps in less than 25, slightly different amount than the ussual, does apple have to force me to update to ios 7 to be able to see all available apps on apps store?

Unless Apple replaced your battery, and it appears they didn't, you're pretty much on your own now. Have you tried going back to whoever replaced your battery? That's gonna be your only choice now, because if a third-party replaced your battery, Apple won't touch your phone now.

I have new iPhone 4s and music will not play I can pull my So we are totally on one water filtration system and the other one has been taken down?music up and hit the play button and it dose nothing!

I have new iPhone 4s and music will not play I can pull my music up and hit the play button and it dose nothing!

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?
And, just out of curiosity, what doe water filtration systems have to do with this?
Best of luck.

May I use MSI FX5900XT with Adobe Premier 1.5 to capture analogic video?

Hi Folks,
Does anyone know if it is possible to use MSI FX5900XT with Adobe Premier 1.5 capturing video ?
I am trying to use this software to capture video and I see that Premier does not recognize it. I can normally capture with Virtual VCR or VirtualDub.
Is there any plug in or driver to permit Premiere recognize the MSI FX5900XT ?
Regards,
Mario Rodrigues

In the Adobe site there is no mention about Nvidia Cards.
I think it is stranger because the capture with Nvidia Cards are becoming very common nowadays.
I would like to know if someone has tried to capture with Adobe Premier using MSI FX5900XT.
Mario

Msi Fx5900xt Bios

Does anyone know where there is a copy of the MSI BIOS for the MSI FX5900XT - VTD128?
My BIOS has become corrupted and I cannot use the Live BIOS Update to recover.
I have searched on the MSI website and cannot find.
I have also contacted MSi Technical Support but they are slow in responding.
Please help; I have a copy of FarCry that needs to be played
Thanks

Deathstalker - relax !
No need to get excited.
I was experimenting. I knew the risk and I'll live with it. It's not the end of my world and I'm not complaining.
I asked if someone could help. Noone did and as it turns out I was able to find the file myself.
My new keychain is driving Farcry at maximum resolution and colors.
Thanks for your kind thoughts and support

Elements 9 ACR 6.5 is a cut down program

I've used ACR with CS4 before to process my RAW files but recently bought Lightroom 3.5 and Elements 9. I've upgraded both programs to ACR 6.5 to support my camera and noticed for the first time that the Elements plugin is a cut down version of ACR 6.5 with many of its features missing. If ACR 6.5 is a free download and available from thrid party websites why isn't the full program available when opening a RAW file withing Elements 9? I've tried downloading it from Adobe and using it as a standalone probram but when opening it up I'm told that it isn't appropriate.
George

From what I’ve seen, while many adjustment tabs and sliders are not in PSE-hosted ACR, the underlying RAW converter is still the same, so if you have made adjustments in LR and save into an XMP then open in PSE, or just use Edit In Photoshop Elements from LR, the ACR that opens the file on the way in to PSE will apply all the adjustments that were made in LR. And so since you can make all the adjustments in LR there’s no need to make anymore adjustments in the ACR on the way into PSE is there?
Is your experience different than this, where if you do something in LR that doesn’t have a corresponding slider in the PSE-hosted ACR, it doesn’t get applied. For example, if you make a manual lens-correction for perspective that is easy to tell whether it happened or not, in LR and then do a Edit in Photoshop Elements from LR, does the perspective-correction not happen?
The only thing that should be different is that you have to be in LR to make all the adjustments, not use PSE-hosted ACR to make them.

MSI R48R4870-T2D1G-OC video card and the MSI K9A2 Platinum

I recently bought the new video card for my system the R4870-T2D1G-OC.
MSI stated that the power cord for the video is not a required, and the MSI board has its own connection for power to the video.
When I tried installing the new card all I get is a series of beeps, as if there is not video card installed. BEfore I send it back and replace it with another I would like to verify that it does not require the power connector and that perhaps I need to do something special before I repalce the card.
I have always used the MSI mainboards and never had a problem till now.
Daniel

Quote
The system boots and I see the dos screen, then it goes black
You mean you see the BIOS logo / POST screen, and then nothing? So the card is working then, no beeps?
Quote
I have replaced the power supply and loaded the drivers supplied by MSI. Now I have no video.
Can you elaborate, as I don't know how you can install drivers if you're not getting any display? ???
Quote
What can be done to get the APPROPRIATE drivers for windos Vista, or do I need to install the 3rd party software to get the ATI cards to work.
Download the Full Catalyst Suite for your appropiate OS version from here:
http://game.amd.com/us-en/drivers_catalyst.aspx

MySQL has run out of memory ::Help needed::

::Help needed::
I've created a PHP web application in Dreamweaver, which uses a MySQL database, containing 14 tables.
On one page, I use a an SQL query to select data from 10 of the tables in the database.
However, when I try to preview the page in a browser, a PHP warning stating that the MySQL engine has run out of memory.
Is there a way of increasing the Memory Cache of the engine, or a way to optimize the performance?

Is this happening locally?
If it is, try rebooting your system and see if this fixes the problem. If not then you have a problem with your code. If it works locally but not on the server, then you know it's not something in your code causing the issue, so you can confidently go to your host support and have them sort it out.
With any such situation, testing locally first is a vital debugging step.
Hope this gives you a path to follow.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer

The MSI FX5900XT has a cut down memory bus?

Similar Messages

Maybe you are looking for