The MSI RX800XL-VT2D256E is very good, powerfull and CHEAP!

 Hello!
Newegg.com has a super prices and the MSI Radeon X800XL it's very good......    what do you think?
see ya!    Newegg.com  MSI Radeon X800XL

Frankn,
You will like that card:
Take Care,
Richard

Similar Messages

  • [Radeon] MSI RX800XL-VT2D256E w/ No Plug?

    My MSI RX800XL-VT2D256E didn't come with a power plug on the GFX card, the card doesn't seem to have enough power and the picture of the product from the site has a plug on the card.. Mine doesn't, whats up with that?

    Quote from: Glenn on 03-June-05, 11:43:10
    I thought that connector was the European connection for VIVO.
    this is in fact a VIVO connector as some European system manufacturers like to put video inputs on the front panel of their systems, and this connector easily facilitates that. The Rage Theater provides the VIVO functionality on these boards, however this may not be available with all configurations, nor the internal VIVO connector
    Googled http://www.google.com/search?hl=en&q=yellow+connector+european+ATI+Radeon
    Source of first search result http://www2.technobabble.com.au/modules.php?name=News&file=print&sid=7
    Oh, ok very sorry, you are right. Thank you..

  • [MSI RX800XL-VT2D256E] Unable to get VIVO to work

    Here's my following specs:
    -MSI RX800XL-VT2D256E PCI-Express VGA card
    -DFI Lanparty UT Nforce4 Ultra
    -1x Seagate 160 GB SATA
    -OCZ Modstream 450W
    -Sound Blaster 2 Audigy ZS
    -1x 2x512MB Dual Channel Mushkin Lvl II RAM
    -LG 4163B 16x DVD-RW Combo
    -Windows XP Pro with SP2
    -Latest Catalyst drivers 5.4 without CCC
    -Latest ATI MMC software
    My current dilemna is whenever I tried to run the Multimedia Centre software, the program keeps bugging me that the "TV player failed to initialize the video".  Upon running the PC check on the configuration, the result is that the "capture driver is not loaded nor enumerated by the device".  The odd thing before running the MMC software  is whenever I tried to install the latest WDM capture drivers on ATI's website, it cannot even install them at all.  No ATI WDM Rage Theater Video nor the ADI WDM Specialized Codec were even detected, saying that it's an unknown device.  I was able to install these WDM drivers from the CD that came with the card and it installed perfectly and that's where I cannot run the MMC software at all.
    I tried to reseat the VGA card, re-install the drivers multiple times using old and new, install a fresh WinXP Pro on the hard drive, etc.  You name it.  I have a feeling that maybe the Rage Theater chipset is dead? 

    I are you saying that rx800xl have TVtuner?, or you want get video signal from a conventional TV?
    until I know rx800xl does not have tv tuner, the theatre chip only provide you capture video signal with the special conectivity kit included with the video card.
    regards.
    Fernando Campos

  • The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that  wifi network

    The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • In Pages when I go to FIND how can I change the highlight colour of the found word?  At the moment it is a very pale grey and not easily seen.

    In Pages when I go to FIND how can I change the highlight colour of the found word?  At the moment it is a very pale grey and not easily seen.

    Well, it might depend on the nationality of your keyboard, but on my US keyboard, the tilde ("squiggle") is above the TAB key; on a Mac, ⌘-TAB cycles through the active applications and ⌘-tilde cycles through the windows in the front application.
    When you do a Find, Pages selects an instance of your search text (the next one after the current selection, I think, but I didn't check that). It doesn't make the document window the front window, though. If you click in the window to bring it to the front, it moves the selection (or insertion point) to wherever you click unless you click on or above the ruler. Try clicking at the top of the document window after you do a find; say somewhere near the document name. Now you should see the highlighted selection (your search text). If you click back on the Find window, the selection will go grey again, unless you hold ⌘ down while clicking.

  • After installing 1.5 with the msi, can I then zip it up and use it...

    After installing 1.5 with the msi, can I then zip it up and use that version on another computer? I've done this successfully already for my needs etc. Just not sure if this was "kosher" etc.
    I've installed Java JRE/JDK 1.5 using:
    jdk-1_5_0_12-windows-i586-p.exe
    I installed it on computer A at C:\jdk1.5.0_12. I then zipped it up and ran it successfully on computer B for my Tomcat service needs. It went seamlessly. However, did I over look any risks doing it this way. I did it this way because the MSI prompts a user for a install path. I need it for both the JRE/JDK to use C:\jdk1.5.0_12. Zipping up my installed version prevents that pesky user-error stuff/support tickets due to user error stuff.
    Granted, I'd rather have users fill out a support ticket due to a typo then erroneously think I was successful at repackaging Java for our needs etc. Follow?
    And therefore, was it ok to zip it up and port it?
    Thanks a lot for your time and help. Truly appreciated!
    Jeff

    JyefuDCJS wrote:
    After installing 1.5 with the msi, can I then zip it up and use that version on another computer? ...No. It will fail on Macs and Unix/Linux (don't know, don't care about other Windows boxes).
    [Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] *(<- link)* is a better alternative for installing (and updating) Java apps. JWS works on all OS' for which there is a JRE.

  • Does anyone else think the new iPhoto is not very good? you can no longer burn photo cd's directly from it!

    I do not like the new iphoto, it will not let you burn a photo cd directly from iphoto like it used to. It use to be simple, now it's not. I also think the faces feature is a waste of time and you can't disable it. Overall i am not happy with this new product i had to pay for. I had to update the iphoto i loved because they stopped letting you send your photo's to be printed from it. Apple is failing. It seems they are more after new sorces of revenue then keeping a good product.

    Did you have a question?
    I don't use the Faces feature, nor the Places one either, but I don't find them a waste of time. There's nothing to disable, just don't use them. Burning to optical media is going the way of the floppy disk. New computers of every brand are showing up now without optical drives. In five years you'll have trouble finding a computer with a built-in drive to buy and in 10, you'll find it hard to get a drive that will play optical media at all. iPhoto 08 was released in 2007 and that means they supported online printing services for 6 years. The installed base of iPhoto 08 is so small now that it's not worth their while.  How you get from your inconvenience to "Apple is failing" is not clear to me. iPhoto 11 is a much more capable application that 08, complete with full non-destructive editing.

  • My mini IPad very slow however I have iPhone working at the wireless always in a very good speed

    I notes my mini I pad always slow and most of the time not connected to the wireless as we'll however I have I phone working very well
    Why this happen My wireless working very well

    iPad running slow? How to speed up a slow iPad
    http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
    If You Think iOS 7 Feels Slow Here’s How to Speed It Up
    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
     Cheers, Tom

  • My name is Mike. I live in New Zealand. My username is waipukurau1. I downloaded MacBook booster from the prompts. Was this a good idea and good for my MacBook Pro? Please answer.

    My name is Mike. I live in New Zealand. My username is waipukurau1. I downloaded MacBook booster. I write to ask was this a good idea? Was this good and correct for my MacBook Pro. Please answer.

    ashish35,
    No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
    Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
    Sorry and good luck,
    Clinton

  • Iphone 5 won't charge unless I wiggle the cable around to fine a spot where it works. It's not the cable/charger as it works perfectly in other iPhone 5's. I haven't even had it a year so it's still under warranty and the phone is in very good condition

    Iphone 5 won't charge unless I wiggle the cable around to fine a spot where it works. It's not the cable/charger as it works perfectly in other iPhone 5's. I haven't even had it a year so it's still under warranty and the phone is in very good condition and has never been abused/dropped etc. I'm taking it into apple tomorrow for an appointment. Has anyone had this problem? if so, what happens? thanks

    I had the same problem and took my iPhone 5 into the Apple store.  What happened was a little embarrassing.  The genius took out a "special tool" (a paper clip) and began digging out an unimaginable amount of lint from the lightning connector port.  After that I was able to connect the cord and charge without any issues. 
    A few days after, I realized that my problems associated with the remote/mic not working on my ear pods might be due to the same issue.  (The volume and action buttons on the ear pods sometimes were not responsive)  I grabbed a paper clip and began digging.  Again, a large wad of lint came out of the headphone port and my ear pods have worked perfectly since. 

  • Difference between MSI NX7600GT-VT2D256E and E-HD?

    Hi all,
    Once again, I believe I'm going with a new vid card from MSI. I already have one in my machine, and like it very much. This is for a B-day present, and am looking to purchase within the next couple hours if possible.
    Basically, I'm just looking to find out what's the difference between the MSI NX7600GT-VT2D256E and the E-HD. Does that mean the "HD" handles hi def or something? The only difference I know of so far is that the E seems to be slightly more expensive than the HD.
    Looking to find this out as quickly as possible. Thanks in advance.

    Bimmerboy,
    The -E:
    The -EH:
    The -EH has:
    Quote
    HDCP - High-bandwidth Digital Content Protection
    HDCP is a content protection specification to protect digital entertainment content across the DVI/HDMI interface. The HDCP provides a robust, cost-effective and transparent method for transmitting and receiving digital entertainment similar to DVI/HDMI-compliant digital displays. HDCP encrypts the data transmitted between the DVI/HDMI connector on the graphics adapter and the display. To provide this support, both the graphics adapter and the display need to have an HDCP transmitter and receiver respectively.
    Take Care,
    Richard

  • WRT150N - Very Good Signal with little or no connectivity from wireless computer

    I just hooked up my WRT150N today and have had countless issues with the wireless connection.  Literally only 50 feet away and I was having LOW signal strength and intermittent connection.  After HOURS on phone with tech support, and after downloading the firmware to no help, they said to just play around with the channels until it improves.  Well, I followed some advice in one of the other threads and suddenly the strength jumped up to Very Good.  The problem is that it shows 4 out of 5 bars lit up and at times all 5 bars lit up but it still says Limited or NO connectivity.  Anyone know how to fix this?  I reset the settings based on the advice of another thread and have LOW signal but yet excellent connection and video feed.  I'd prefer the "Very Good" strength AND great connectivity which is obvious.  Does anyone have any advice?  Thanks!!!! 

    You can be physically close yet have poor signal strength is you have a very absorbent wall between the client and the router. So that's one ting to watch for. Having the router near any metal, cordless phone system, the ground, or other absorbing material (think of things that absorb water, like drywall) will also reduce signal levels.
    Most often this sort of problem is interference from other routers that your neighbor has nearby, or cordless phone systems, which share the same frequency space as 802.11 routers.
    Install the utility "Network Stumbler", available free from http://netstumbler.com/ Then check for what other routers and clients appear in NetStumbler, the channels they are on, and their signal strengths (as well as yours). You can use this to find a channel that is less congested and spaced far apart from competing channels (they overlap in frequency significantly), as well as to optimize your antenna orientation, router location, client location, and router settings.

  • Would the GS70 Stealth Pro-24 be good for a Mechanical Engineering student?

    I will be attending college in the fall with the intention of studying mechanical engineering. I am looking for a good laptop and I was told to find something with a dedicated graphics card. The Stealth Pros seem like they could handle 3D design and other engineering software pretty well. Can anyone with an engineering background give me any advice? Thanks.

    Quote from: CBerger02;107428
    I will be attending college in the fall with the intention of studying mechanical engineering. I am looking for a good laptop and I was told to find something with a dedicated graphics card. The Stealth Pros seem like they could handle 3D design and other engineering software pretty well. Can anyone with an engineering background give me any advice? Thanks.
    Hey CBerger02, I am an PLC programmer in which have a 4 year degree in elctro/mechanical technician and am 2 years away from my masters in electro/mechanical engineering. So I think I could answer your question right quick.
    If you want something that's going to be the best for what you need, its really dependent of the software you going to be using. If its straight autocad and maya, you'd be better off with the msi workstation, gt60 with quadro 4100 gpu and 3k screen.
    If you want something that will be all around good for most programs, not great in any specific but good in pretty much every one, then the gt70 with 880m 8gb gpu and intel i7 4810/4900. **This is the one I have, its the gt70 dominator pro 890.**
    If your willing to sacrifice some rendering time, but add slim and easier on the portability side, then yes, the gs70 ghost pro would be  a great option. It will run slightly warmer, and fans will be louder while maxing it out. But it offers superb specs for the space and weight provided.
    Just make sure with the pro, that you get the x2 msata option or add your own. Most programs and rendering sessions will be cut into 20% of the time if you can read from and write to a ssd vs mechanical. But don't allow raid on the drives, just use the 2 msata as 2 individual drives. So youll have like c:/ d:/ with msata and then e:/ will be your mechanical.
    Also the 870m will provide the best times for rendering sessions. Wont take away much battery as the 860m in the msi's is the keplar not Maxwell. But the extra cores/shaders/vram will help you out.

  • Multiple Issues with the MSI board...

    This is my first experience with the MSI board and so far its not very smooth... I have this MSI NEO 2 standard board My specs are
    P4 2.8C
    256 MB (single module) DDR 400 RAM. (TWIN MOS)
    Geforce Ti4200..
    80 GB Maxtor SATA
    FAX
    CD-ROM
    WIth WINDOWS XP HOME Edition..
    i have done no overclocking and the problems are..
    1. First of all it takes lot of time to show the first screen... like the vga card screen comes after 4 seconds.
    2. Some time i press the power button and when the system is detecting the hard disk and CDROM it gives error message like DRAM timings are too tight. i have check the BIOS setting and everything is normal and there is no overclocking and RAM is rated to run at 400 MHz.. although not a great brand but not a bad one either..
    3. Sometime just before loading the operating system it gives an error message that No boot sector found.. insert a Bootable floppy or CDROM.. and when i restart it start going on as usual..
    So wot are the causes of these problem .. i think mainboard is the main culprit... i have scanned my system with 2 anti virus and there is no virus..
    any suggestions..?
    Thanks..

    Quote
    Originally posted by Eddio1
    I've been reading the posts here for about a week and I decided to finally ask for some assistance.  Just picked up the MSI 865PE Neo2-V from BZBOYZ.COM and 1Gb generic matched Elixir 512's and I've tried dozens of bios settings as posted here.  I was finally able to install 2003 ent. server and if I'm lucky, it will get past the 2003 splash screen to a login screen, I'll log in, then put it to work (you know browse some heavily populated folders) it freezes and a reset is necessary.  Now, I cant even get past the splash screen.  I must have booted 200 times with every bios combination and I'm tired of doing fresh installs and experiencing the same system freeze issues.  I've been in the IT business and built dozens of boxes in the past and never had such problems (using bios failsafe defaults no less!) getting an OS to install and run in a reasonably stable fashion.  Mobos these days are extremely frustrating!  I'm going to pick up some Corsair twinx RAM and hopefully this will resolve.  Any ideas would be greatly appreciated in advance of more waiting and RMAing the RAM I have for some Corsair.  Do you think I'm on the right track because I'm gonna be really pissed if new RAM doesn't do the trick.
    Bios settings:
    Bus mastering enabled
    Configured RAM manually in bios 3-4-4-7-8 (tried PSD to no avail)
    Disabled dynamic o/c
    Disabled spread spectrum
    Normal speed
    HT enabled
    All other settings bios setup defaults
    MoBO specs:
    MSI 865PE Neo2-V latest bios: Version  5.4   Update date 2004-7-5
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=612
    P4 3.2 Prescott
    400 FSB
    1Gb Elixir PC3200 RAM (I suspect this cheap RAM is the issue)
    Memtest says it runs at 3-3-3-8
    I configured it manually in bios (per some previous posts) to run 3-4-4-7 (only way to get a boot)
    Native for SATA/ATA
    PS-Enermax EG365P-VE FCA-3.3V-32A, +5-32A, +12-26A
    ATI Radeon 8500 64MB
    Seagate SCSI Cheetah-36Gb 15K 160Mb/s
    Seagate SCSI Barracuda-73Gb 10K 160Mb/s
    Adaptec 29160N
    Boot to Adaptec then floppy then CD
    HI check my previous thread, entitled problem after udate of xp, or look for threads with name on  Sounds like a similar problem.

Maybe you are looking for