The music in slideshow quit working

We ran about three slidesshows with music and now it won't play the music with the slideshow

I have found that you need to convert your audio file to an .mp3 file and then it works perfectly. You must do this from iTunes, as follows:
Select the song file you want to convert --
Select Edit
Preferences
          Under the "General" tab, click on Import Settings
               Select "import using mp3 Encoder
                    check the "use error correct . . "
Then you will have to import the song into Elements 11 and add it to the slideshow.

Similar Messages

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

Why doesn't the music, but audio is works fine, in iMovie'11?

I recently opened up a project I was working on in iMovie '11. The music I had recently added wasn't working because it said it couldn't locate the original file.
I reloaded the music and started adding it to the project, deleting the music that wasn't working as I went along. The new music worked for a couple of minutes, but now it isn't working at all. Nothing plays, whether in the playback mode or through scrolling. But when I scroll over the dialogue in the project, that is working...
Any one know how I can fix this?
<Links Edited By Host>

Hi
You are using a Non Destructive Video Editor - and to get this to work as it should - non of the raw-material can be moved at all.
So if You are using material on external hard disks or USB-memories or Audio-CDs they all need to be there when working on the project.
There is no Movie in Your project (no copies) but just a small text document pointing to Your raw-material and how it is to be played to be the Movie You are working on.
I do a folder on my Mac where I put all extras Audio and photo files so they are in a specific location at 100% (no alias). Audio as .aiff 16-bit 48kHz (no .mp3, wma etc - but all converted to .aiff and photos as .jpg)
From here I get it into my movie project - just to be sure that all is there if external hard disks, Audio-Cds etc are not connected.
Audio from iTune is a chapter on it's own. I collect all needed audio into a new PlayList then BURN it out as an Audio-CD (.aiff not .mp3) then I use the files on this one.
Yours Bengt W

When I am listening to music whether through pandora or the music ap it stops working when I bring up safari. It worked before I updated, is there a solution in fixing this?

When I am listening to music whether through pandora or the music ap it stops working when I bring up safari. It worked before I updated, is there a solution in fixing this?

Reboot your iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Is there a quality iphone headset cord extension that allows the music/call buttons to work?

Hi folks,
The open-style earphones included with the iPhone 4S work very well, but the cord is about 6" too short (deep pockets). I've looked online but am having difficulty finding a quality iphone headset cord extension that [definitely] allows the music/call buttons to work. Alternatively, are there other open-style earphones (as opposed to in-ear buds) that have the same music/call buttons and a longer cord?
Thanks.
Jeff

I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm

My slideshow quit working on iphoto

My slideshow suddenlly quit working in iphoto. The screen goes black for a second like it is going to work then it just returns to photos.
Anyone else with this problem?

You also may want to post this in the iPhoto forum if no one here has any ideas.

The music controls are not working after updating to iOS 7!

After updating, the main music app is working fine, but the music player accessed through the lockscreen and the menu you pull up by swiping upwards is not working properly!!!!! The fastforward, rewind and play/pause buttons aren't responding at all! Volume and the pace bar works though...Please help!!!

I had the same bug. Powering off the phone and back on resolved the issue

I have an iPhone 5. I got it just over a year ago and the power button recently quit working. Since ive had it for over a year, can i take it in and have it replaced or fixed?

I got my iPhone 5 a little over a year ago, and my power button recently quit working. Since ive had it for over a year, can i still get it fixed or replaced?

Wow that is so unlucky. If I was you I would try talking to someone at the Apple Store, explain your situation and don't be shy to shed a tear or too. Its just a shame 3 weeks after your phone getting hardware problems. I know people will say, oh buy Apple Care but I feel ya and I know adding that extra money in the beginning feels pointless and expensive.
Worst case scenarion like I said you will have to pay Apple 269 for them to swap phones. Or if you have any nerd friends have them fix it for you. Its a tedious repair the way the power button has some weird hinge that needs to snap on and ribbons are so thin. I do not advise for you to attempt to fix your self unless you don't care if you break it completely.
Alternatively you could just turn on Assisitive touch on accessibility and use that. That way you wont need to pay anything to fix your phone and wont need to take it apart either.

Why won't the music player quick link work on ios7

I have installed ios7 and now the quick link music player will not work! Any ideas as I cannot play music in the car without going into the full music player! Also my in car controls have stopped working the player? Very annoying worked fine on ios6

Unfortunately, I think that is probably your only option. the "!" is stating that the link between the music and the visual title on your iPod is broken and the iPod doesn't know where it is. Did you have auto-updating on for your music when you plugged it into your friends computer? And how did you remove it from the computer? If the iPod was still updating when you removed it, that could have caused it.

I have an iphone 4S. The calendar application just quit working. Help!

I have an iPhone 4S. The calendar function quit working. All existing appointments were wiped out and the "+" button no longer works to add new appointments. Any suggestions?

Restore the phone, first from backup, and if that doesn't work, then as new. If that still doesn't resolve your problem, you'll need to bring your phone to Apple for evaluation.

All the fire wire ports quit working.

Hello to all. As you see I am a newbie on here. Last night I was transferring files from my exteranl FW400 to my other FW800 which are daisy chained together. Ive done this hundreds of times. Last night as I made sure at least one of the files transferred over, I went to bed like I always do. I woke up this morning and had noticed it didnt finish several files because it was no longer seen on my mac.
This has happened before, so I shut down and restarted. Nothing, Then I noticed my other FW800 hard drives where not showing up. I shut down for 10mins, started up and nothing. Went over to check on my firewire bus and it said it can not locate the bus at this time. Nothing is smelling burnt, I looked inside and it looks normal. Please help. This is the first Major issue ive eeeeeeeever had with my macpro.

Here's more......Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good!
Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.
DALE

I installed Photoshop 13 which appreared to do fine. Everytime I try to open it I get the message "Photoshop has quit working and is shutting down." Why?0

I installed Photoshop Elements and Preimere 13. This appearred to install properly but I can not open it. When it opens the circle goes around for awhile but then a pop up say that Photoshop has stopped working and is shutting down. Also. how do I get my photos from Photoshop 10 into Photoshop 13?

You don't have "Photoshop" proper. You have a cheapo emasculated version called Photoshop Elements. That is NOT Photoshop.
As Gene told you:
Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Why did the smaller/larger buttons quit working in Mail 3.3

In Apple Mail 3.3, message toolbar, the smaller/bigger buttons no longer works. The function works using the pulldown menu. I tried reloading mail, and a new tool, but no cigar. Anybody know what's what?
Thanks
Dalej

My bad, I should have said Mail V. 3.2 as that is what I have.
The buttons I refer to are on the tool bar of a message window. If you don't have them, you can go to the view pulldown menu, then select customize toolbar and drag the
button to the toolbar of your message window. It looks like a small capital A and a large capitol A. When viewing or writing an e-mail in the older versions, if the message letters were small I could go and hit the large A a few times and the lettering would increase in size, but no more with my upgrade to 10.5.
Dalej

I fell and crack the back of my iPhone 4S now the phone and 4S quit working.

Tried restoring, and taking out SIM card didnt work. Can Apple do anything to help or will I have to buy a new phone

Apple will replace the iPhone for you if you pay for because the warranty down't cover damage. The chage for a replacement is generally about half the cost of buy a new one.
Allan

I installed Photoshop Elements 13 which appreared to do fine. Everytime I try to open it I get the message "Photoshop has quit working, closed the program

Original CD Program with reg-number Win7 64bithome 8mb ram, i have re-install the program, and cancelled all reg. but nothing change. How can i use this program. One week ago it was normal, but since 3 days i can not work. I have the Lightroom 5 on my computer - there no problems.

Try deleting the prefs which will get re-built to the default status.
Go to:
C:\Program Files\Adobe\Photoshop Elements 13
Find PhotoshopElementsEditor (see image below) and hold down the three keys Ctrl+ Alt+Shift (not Ctrl+Alt+Delete) then right click on the editor application and choose Open.
Keep all three keys pressed until you see the settings dialog and then release.
Click on Yes and the program should launch.

The music in slideshow quit working

Similar Messages

Maybe you are looking for