The music on my nano is not playing properly, I can hear the song but it is slow and not the way it is meant to sound.

I have used the online help and reset my ipod but that still doesn't work and it was working fine this morning and is fully charged.

Did you try a complete restore of the device in iTunes? Perhaps tried a different set of headphones before doing that?  Does this only happen with particular songs or all of them?
B-rock

Similar Messages

  • TS1717 i am clicking the buy button, but itunes is not responding.  i can look up songs but not purchase.

    I am clicking the buy button in iTunes but it is not responding.  I can look up songs and play them, but not purchase.  I am working on a playlist for a school dance and purchased 10+ songs yesterday so it was working yesterday.

    Hi B
    I meticulously followed the instructions but I still haven't been able to completely uninstall itunes and the ipod.
    When I right-click on the bin folder in the ipod folder in program files and then choose delete, I get the following message:
    "Cannot delete iPodServiceLocalized.dll: Access is denied. Make sure the disk is not full or write-protected and that the file is currently not in use."
    When I right-click on the Quicktime folder in program files, I get the following message:
    "Cannot delete QTTASK.EXE: Access is denied. Make sure the disk is not full or write-protected and that the file is currently not in use."
    When i open the windows installer cleanup tool I cannot see itunes/ipod/quicktime in the list.
    I suspect this is something to do with administrator rights? How do I log in as an administrator? Only me and my husband use the computer, but we don't log in under any different IDs or anything, we just switch it on and start using it?!
    I tried installing 4.9 from one of the other threads anyway, but I still get the message that a newer version of itunes is installed so it cannot continue. The itunes in the ipod program file shows as 4.8.0.
    Look forward to your advice again.
    Thanks, Amanda.

  • For the past few days videos are not playing properly. They appear to load but stop and start, even though the line of thumbnails shows up at the bottom. Clicking play does nothing.

    There seems to be a major problem with video playbacks both from web sites and YouTube. If I click on a video the loading circle shows it is loading but either the video starts for 2-3 seconds and stops, or it won't start at all. At the bottom of the screen there is a section that shows individual thumbnails for the video and that shows that the video has loaded, but it refuses to play. I just tried a youtube video on my iPhone and the same thing is happening. Some occasional videos seem to work okay but I have spent much time trying to watch clips.

    Use SpeedTest to test the speed of your internet.  If slow, contact your ISP to confirm if the problem is on their end.
    You have 2 versions of QT.  Version 7.x is inside your Utility folder.  Try that one.
    =================
    The latest version of Adobe FlashPlayer can be obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157  and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • How can I set my WebI filters to Null and not Null

    Folks,
    I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
    How can I set my WebI filters to Null and not Null?
    Regards,
    Bashir Awan

    Hi,
    As you said you could do it at the report level and also at the universe level.
    One more way is to create the filters in the universe levele and add them in thequery filter.
    Ex: in the filter you need to write :
    Column1 is null and and column 2 is not null etc.
    Hope this will help.
    If this did't  solve your problem then please explain it in detail.
    Cheers,
    Ravichandra K

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • Why do I have to turn the volume in my car up to at least 30 to hear newer songs from iTunes normally? Older versions I can hear just fine at a volume of 12

    Topic says it, I can't hear the newer songs unless I turn the volume in my car up to 30, yet I can hear other songs at 12, so my volume is set at 30 from one song then another song comes on and I go deaf

    I had the exact same issue!! Seriously p*ssed me off when I checked out my ITunes purchased items (via my computer) and noticed that most of the additional tracks listed on my IPhone playlist was listed there too. However, I never authorized any purchases!!  (I have actually written Apple Support asking for a full refund of all tracks listed on my purchased list)
    Be careful when you swipe your finger to the left/right on those "additional" tracks on your IPhone playlist... I'm pretty sure that the cloud symbol is an option to download or automatically buy those tracks.
    Solution for the problem:
    1 - go to your IPhone settings
    2 - choose "iTunes & App Store"
    3 - go to "Show All" & "Music"
    4 - turn off "Music" by moving the bar to the left (it should be a white color once you turn it off)
    Should solve your problem :~)

  • A lot of my music is on an external Hard Drive, currently "H" drive.  When I try to play a song in the Library in Itunes I get the message that it can't find the music.  Info says it's in a different location "G" Drive.  But it's not. it's in "H" Drive.

    A lot of my music is on an external Hard Drive, currently "H" drive.  When I try to play a song in the Library in Itunes I get the message that it can't find the music.  Info says it's in a different location "G" Drive.  But it's not. it's in "H" Drive.  How do I tell it where to go?

    What if you take this same topic of an external hard drive with music but instead of directly attached to the computer the music is on a Network Attached hard drive(NAS)? Will I be able to add music to my ipod without any problem? Step that up a notch, will the two computers on my network be able to recognize the music on the NAS? Will the two users be able to create their own playlists and update their ipods independently? Now step up that up one more notch, will I be able to do this with one PC running XP and my macbook with OS X?
    Before I run out and buy a NAS I want to be certain. I also would like to convert my DVD library in the future and put it on the network available to an AppleTV or other UpNp media player in the future, because I love having power at my finger tips.

  • My ipad2 will not play my iTunes video that i just purchased; i've deleted and reloaded, but they still won't play, only the music

    My ipad2 will not play my itunes videos that i just purchased; I've deleted and reloaded them twice, but still won't play; plays music only, any suggestions?

    You are playing them in the Videos app correct? Music Videos will play the video in the videos app, not in the Music app.

  • When I open Power Point files in Keynote the music does not play. How can I solve this?

    When I open Power Point files in Keynote the music does not play. How can I rectify this?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • The music app on my Iphone 5 is acting up, it keeps skipping  songs and wont allow the to play. You can see the music icon the on notification bar play and pause. When i go back to the app is states the url is not responding. I have restored it.

    The music app on my Iphone 5 is acting up, it keeps skipping  songs and wont allow the to play. You can see the music icon the on notification bar play and pause. When i go back to the app is states the url is not responding. I have restored it from the backed up cloud save. It is the music app, I played music on pandora and it worked fine. I think it must be the app or the ios.

    restore with itunes not from an itunes backup or cloud save they do absolutely nothing only a clean restore will solve your problem

  • HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

    I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

    Hi Novagurl2369!
    I have an article for you that can provide some helpful troubleshooting steps to address your issue:
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • On iTunes 11, how can I access home sharing if the music is from a CD? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

    On iTunes 11, how can I access home sharing if the music is from a CD on a different computer using Home Sharing? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

    Yes, you can copy songs that you ripped from a CD to your Home Sharing computer.
    Turn on Home Sharing first on both computers.  To do that, go to File > Home Sharing > Turn on Home Sharing.  Enter your Apple ID and password.
    Now go to your computer that you want to copy the songs to and connect to your Home Share.  You can do that by clicking on the popover button located at the left top corner right below the play control buttons.  Click on it and scroll to the bottom until you see your Home Share and select it.
    Go to Music in your Home Share.  Select the songs that you want to copy in your Home Share and click Import at the bottom right corner.

  • How do I load the music to my Nano?

    I have downloaded music from a CD to Itunes on my computer.    How do I load the music to my Nano?    I have tried, but all I get is static or load roar when I try to play it back on Nano.  What am I doing wrong?

    Does this music play okay in iTunes?  If so, have you tried restoring your Nano to factory settings in iTunes and then reloading this music back over to it?
    Have you also tried a different set of head phones to rule out that possibility as well?  If might be hardware issue and in that case, I would schedule an appointment at your local Apple Store/Genius Bar and have them take a look at it for you.
    B-rock

  • How can you let GB show the music sheet of what you've played

    Hello,
    I heard that it is possible to see the music sheet of what you've played in GB.
    Does somebody know how to do that.
    Greetz Indy

    Hi,
    You can view a Software Instrument region in notation view.
    Select the track, open your "Track Editor", look in the section to the left, at the bottom, there are two choices - one is lit (has two bars on it). The other is a note. Click on it to select "Notation View".
    You can edit your track in this view if you want to.
    (There is unfortunately no way at this time to print this notation out from within GarageBand.)
    WH [:c)~

  • I purchased a song from the itunes store and down loaded it to my ipod. The song will not play. I attempted to listen to it on my computer and itunes asked me to authorize my computer. I did so and it told me I authorized one out of five computers .

    I purchased a song from the itunes store and downloaded it to my ipod and it will not play what happens now?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Maybe you are looking for