The navigation arrows in the upper left corner have disappeared
The navigation arrows in the upper left corner of my Safari have disappeared.
From your Safari menu bar, top of your screen, click View > Customize Toolbar
Click and drag the Back / Forward icon up to your toolbar.
Similar Messages
-
Yahoo toolbar suddenly imposed itself as my log on screen whenever I booted up my computer and clicked on Firefox. Now I can't get to my bookmarks even though it told me that if I activated the new bookmark system it would transfer my old ones. It didn't happen. The toolbar has no bar for typing in a www.http address. I cannot use it and don't want it. I am using Explorer just so I can access my bookmark address, but don't like Explorer. I want my old Firefox screen back that has the little orange button in the upper left corner of the screen. How can I get there? My computer use has been highly curtailed by this unrequested invasion!
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.<br />
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
*https://support.mozilla.com/kb/Menu+bar+is+missing
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
Transferred from iPhone 3GS to 4. Backed up and restored smoothly. Still getting a "no service" message in the upper left corner of new phone. Help?.....
Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone? -
Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong resizable black box sitting on top of anything. The content changes depending on the actions I take. Right now it says, "You are currently on a close button. To click this button, which closes the current window, press Control-Option-Space." Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there. I've tried closing all my applications and restarting and I also reset the PRAM. It won't go away. It's probably something simple, but I don't know how to get rid of it. Any suggestions are welcome.
Thanks,
JanetThanks so much. I saw this on "desktop strangeness" immediately after I posted and tried to retract my question. It worked perfectly. I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer. I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up. Still looking for the resolution to this.
-
How to display a frame at the upper left corner of each screen?
hi,
below are 2 ways to display a frame at the upper left corner of each screen (i have 2 monitors).
both work but the 2nd way is much slower. which, if any, of the 2 approaches is "more" correct?
import java.awt.Canvas;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.DisplayMode;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseAdapter;
import java.awt.GraphicsConfiguration;
import java.awt.GraphicsDevice;
import java.awt.GraphicsEnvironment;
import java.awt.Point;
import java.awt.Rectangle;
import java.awt.Toolkit;
import javax.swing.JFrame;
import javax.swing.JPanel;
// the thing that matters in here is setting the frame's location: xCoord
// is incremented in each iteration by the current screen's width and
// is used to set the frame's x-coordinate.
public static void main(String args[])
GraphicsEnvironment gEnviron = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gDevices = gEnviron.getScreenDevices();
Color colors[] = {Color.blue, Color.red};
for(int i = 0, xCoord = 0; i < gDevices.length; i++)
// set panel's size and frame's size to take up the whole screen
DisplayMode didsplayMode = gDevices.getDisplayMode();
int screenWidth = didsplayMode.getWidth();
int screenHeight = didsplayMode.getHeight();
JPanel panel = new JPanel();
panel.setBackground(colors[i % colors.length]);
JFrame frame = new JFrame();
frame.setSize(new Dimension(screenWidth, screenHeight));
frame.setContentPane(panel);
frame.setUndecorated(true);
// set location of frame.
frame.setLocation(xCoord, 0);
xCoord += screenWidth;
frame.addMouseListener
new MouseAdapter()
public void mousePressed(MouseEvent event) {System.exit(1);}
frame.setVisible(true);
// this is a lot slower and may not be correct: it sets the frame's location by calling
// getConfigurations() on each screen device but using only the 1st configuration
// (it returns 6 on my computer) to get the bounds (for the frame's x-coord).
// a screen device has 1 or more configuration objects but do all the objects
// of the device report the same bounds? if the anwser is yes, then the code
// is correct, but i'm not sure.
public static void main1(String args[])
GraphicsEnvironment gEnviron = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gDevices = gEnviron.getScreenDevices();
Color colors[] = {Color.blue, Color.red};
for(int i = 0; i < gDevices.length; i++)
// set panel's size and frame's size to take up the whole screen
DisplayMode didsplayMode = gDevices[i].getDisplayMode();
int screenWidth = didsplayMode.getWidth();
int screenHeight = didsplayMode.getHeight();
JPanel panel = new JPanel();
panel.setBackground(colors[i % colors.length]);
JFrame frame = new JFrame();
frame.setSize(new Dimension(screenWidth, screenHeight));
frame.setContentPane(panel);
frame.setUndecorated(true);
// set location of frame: getConfigurations() is very time consuming
GraphicsConfiguration[] gConfig = gDevices[i].getConfigurations();
// on my computer: gConfig.length == 6. using the 1st from each set of configs
Rectangle gConfigBounds = gConfig[0].getBounds();
frame.setLocation(gConfigBounds.x, gConfigBounds.y);
frame.addMouseListener
new MouseAdapter()
public void mousePressed(MouseEvent event) {System.exit(1);}
frame.setVisible(true);
thank you.Darryl.Burke wrote:
Blocked one abusive post.
@flounder
Please watch your language.
dbDude - I just looked at your profile. WTF are you doing in India?? -
What's the RIGHT way to draw an image in the upper left corner?
I have an NSView in a ScrollView and I'm trying to draw an image in it. The problem is that I want the upper left corner of the image locked to the upper left corner of the frame, instead of the lower left corner, which is what the View wants me to do. I will need to be able to zoom in and out, and rotate.
currently, I have a kludge of a system where I calculate how much I have to translate my image based on the size of the image and the size of the window. In order to do this, I needed to create an extra view outside the scrollview, so that I could get the size of the window, not including decorations. Then I can calculate the size of the view based on the size of the image and the size of the window, and based on THAT, I can figure out where to translate the image to.
My only other thought was to use the isFlipped: method, but that ends up reversing my image L-R which is bad.
Is there another way I should be doing this?
thanks.Ah, the problem is that the content view includes the control panel, and while I'm sure I can get access to the control panel, and find out it's size, and then calculate everything off that, it becomes messy, and my way is easier, and no more messy.
And I never said this was HARD. I have already DONE it. It's just ugly, and I'm wondering if there is a better way to do it. Translating between coordinate systems is normal, but changing lower left to upper left origin is an artifact of the Mac's history with PDF and PS.
If the way I'm doing it is the accepted normal way, then fine, just tell me that. -
I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows -
I've done it a million times, I copy a selection of type...I select the type that I want to replace it with, and then I paste. Now, Illustrator will only paste the text as a "point text" (a single line) somewhere else on the artboard—it seems to always be the upper left corner of the art board.
peg,
In cases of sudden appearance of strangenesses, the list may be relevant, hopefully the easy part at the top.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
How to replace the LabVIEW icon in the upper left corner of panels?
Hi Gang,
We're going to create an application that will go to customers. We want to replace the LabVIEW icon in the upper left corner of panels with the company logo. How do I replace that?
All responses will be appreciated.
Thanks in Advance,
Roger
Solved!
Go to Solution.As rolfk said, edit the icon in the build specification.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Edit EXE Icon.png 36 KB -
There is no file or other things in the upper left corner. Not even a place to upgrade in the future. I talked to a guy in support today and I told him I was missing that stuff and he helped me navigate better but didn't really help me with the missing elements. Like why is my phone listed under home share sometimes and othertimes it is not.
Right-click a toolbar, untick "menu bar".
-
I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?
To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
to pin a tab as an app, right click on it; it's an option in the right-click menu. -
I have this question mark (?) in the upper left corner of my Finder windows. Anyone know what's up with that, what it might portend, and how to get rid of it?
Are you sure you have a PowerMac? They can't run Mac OS 10.6.8. Maybe a Mac Pro instead?
Can you post a screen shot of that portion of the screeen for us to review? Does the question mark replace the Apple that's at the left end of the menubar? -
The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications. Does anyone know how to get those buttons back? I guess I could just switch betwen appliations, but I am used to doing it the other way.
You're welcome
You had Safari in full screen mode. -
HT3204 my phone has no service in the upper left corner, help please
My iphone has no service in the upper left corner, please help
i cant get service to my iphone its a diffrent network im with optus and i dont no how to change it over
-
Question mark in the upper left corner of finder
Hey,
I have just installed a bigger harddisk and more ram in my MacBook Pro (from last year).
Now there is a question mark in the upper left corner of finder. If I click on it, there is a message : the object doesn't exist, well my message is in danish, but I think this is a close translation. So what is happening?
Regards StigControl-click it and choose to remove it, or command-click it and drag it out of the title bar.
(38394)
Maybe you are looking for
-
Trying to open my layers or brush panels in photoshop Cc 2014 and they won't stay open. They close as soon as they open. This started immediately following the latest update that I ran today.
-
AS2 using HTTPS - Handshake failure # null
Hello, I have scenario IDoc - PI - AS2 using HTTPS. when i am trying to send data it is giving me "Handshake Failure" error. I have check certificate and configuration properly. Parnter is saying "your client doesnu2019t sent the requested client cer
-
How to write the exceptions in function module
dear all, how to write the exceptions in function modules with example. thanq jyothi
-
How to disable software auto update from iPad
I was trying to download my favorite programs and iOS 7, but first I have to stop software auto update, how will I do this?
-
Reg Usage of ODS Table in Transformation
Hai All, I am new to SAP NetWeaver BI. Can i use the ODS Table in the transformation rules ? Is this the right approach or not ? My requirement is i have to poulate some infomration into new ODS depending on the data which is available