The Navigator in "Develop" mode in Lightroom 5 doesn't show current photo

In Library mode, the Navigator does what I'm used to from previous versions of Lightroom -- it shows a preview of the currently selected photo.  However, when I go into "Develop" mode, the Navigator chooses another photo from the collection I'm working on (always the same one, it seems) and shows that one.  This is frustrating, because I like to use the Navigator in Develop mode to see previews of an edit I'm working on.  It's also just nonsensical that it shows a different photo.
Is this a setting I need to set somewhere, or a bug?
Thanks!

john27rg wrote:
Michelle, where did you find that option? I have this problem as well with LR5, but can't find that option.
Edit > Preferences > Interface tab,
Checkbox in "Filmstrip" section

Similar Messages

  • Lightroom trial doesn't show complete menu selections or import button.  Also get error message on launch:  An error occurred when attempting to change modules.  I am unable to find/see the following file to try renaming the SLCache and SLStore files:  Sy

    Lightroom trial doesn't show complete menu selections or import button.  Also get error message on launch:  An error occurred when attempting to change modules.  I am unable to find/see the following file to try renaming the SLCache and SLStore files:  System Library/Application Support/Adobe.  Any ideas?  I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro.  This is all I am seeing after Lightroom opens.  Thanks!

    Thanks to both of you for attempting to help.  I finally figured out what was wrong . . . it was a Permissions problem.  Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem.  I had to add a User and give it Read/Write privileges to Lightroom.  The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery.  Only a few days left on my trial version!  I hope I have time to try it out!

  • HT201363 When I sign in to my Apple ID in "My Apple ID" and go to "Passwod and Security" I should answer the security questions but I don't remeber them and the bar that says "send to rescue email" doesn't show !! How could I recover the questions??

    When I sign in to my Apple ID in "My Apple ID" and go to "Passwod and Security" I should answer the security questions but I don't remeber them and the bar that says "send to rescue email" doesn't show !! How could I recover the questions??

    You will have to contact iTunes Support and tell them you have forgotten your Security Questions and need them reset. They will respond to you by email, usually within 24 hours. Here are two links to contact iTunes Support:
    http://www.apple.com/support/itunes/ww/
    or by email:
    http://www.apple.com/emea/support/itunes/contact.html
    Cheers,
    GB

  • Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but  Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

    Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
    Is it a bug?

    Sorry for the huge chunk of code.
    Mm, yes, I'm far too lazy to read all that.
    But you should be overriding paintComponent(), not paint().
    http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
    I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

  • My iPod was stolen a long a few months ago and I've given up all hope in finding it. I have never purchased item on iTunes, and I think the iCloud might have been deleted. It doesn't show up in "My products" either.

    My iPod was stolen a long a few months ago and I've given up all hope in finding it. I have never purchased item on iTunes, and I think the iCloud might have been deleted. It doesn't show up in "My products" too and I tried Find My iPhone.

    No. Apple won't do anything without a court order. Since it wasn't upgraded to iOS 7 before it was stolen then there's nothing you can do. You could file a police report with your serial number but there may be a small chance.

  • I am unable to open images in Develop Mode in Lightroom 5.4. I keep getting system crashes. Now they wont even open images up at all in any mode.

    I have Lightroom 5.4 under the CC from Adobe. EVerytime i opened an image up in Develop mode, the program would crash and Microsoft would tell me its stopped working. After playing around with it, now it wont even open up images in ANY of the modes, WHAT IS GOING ON WITH LIGHTROOM ?!?

    First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
    All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
    Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
    This will make sure you don't accidently delete important app files.
    All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
    Hopefully this helps...

  • Develop Mode in Lightroom

    All of a sudden, the edit function in the Develop mode does not work (it's not lit up). Is there something that I did to cause this to happen, and how do I resolve this?

    Error changing modules | Lightroom
    Mylenium

  • Lightroom CC doesn"t show my login and won't sync

    I cannot sync desktop with lr mobile and I suspect it is because lr cc doesn't show me as logged in.When I go to Edit/preferences/lightroom mobile it shows 'Adobe Id: not logged in.When I go to the identity plate there is no option to login. When I open LR 5.7 it all works.

    <moved from Creative Cloud Download & Install to Photoshop Lightroom>

  • Lightroom 5 doesn't show GPS info from canon 6D

    Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8! Strange...

    I think I was having the same issue - after all I found out that when importing photos via Lightroom, I was overwriting the GPS information by "updating" the metadata by using the preset I used to use for my scanned film photographs. 
    Check the following:
    When importing, on the right hand side you see "Apply During Import"
    If you have the "Metadata" section "None" then this is not the solution for you.  But if you have something else, make sure that you go into "Edit Presets" then UNCHECK "GPS" section of it. 
    Hope this helps. 

  • HT4589 How do I get the update to 10.0.3? It doesn't show up in software update and I can't find it on the Apple site.

    I am stuck on 10.0 I have not received any updates since I installed FCPX last june. I can't find any links to the update on Apple's site and Software update doesn't show FCPX in its software list. What's the deal?

    If you don't meet the minimum system requirements, it will not allow you to download it:
    http://www.apple.com/finalcutpro/specs/

  • LR 4.3 continuously refreshes the image in develop mode

    I am using LR 4.3 with Photoshop CS5. I have found that after editing a picture in photoshop (transfer from CR2 to .TIFF file) it correctly transfers back into LR as an updated .TIFF file with all edits from PS. However, on further editing of the picture in LR the image is refreshed after EACH edit (ie. file reloads into LR taking a few seconds). If I am trying to apply an edit as the refresh starts then that edit gets lost i.e. NOT applied. The refresh happends after ANY change to the file. It is very frustrating as it wastes time and makes editing slow (have to keep waiting for a refresh). It does not appear to happen in that way when editing CR2 files.
    I have only noticed this feature since installing V4.3 although it may have been happening in previous versions. Is there any way round this problem?
    I am using W7, i5 2.5 Ghz processor and 8 GB ram with dual screens.

    This problem has existed in LR since about 3.0.
    If Lightroom creates a tiff or psd for external edit, then when it is returned to LR and one attempts to further adjust the image, the adjustment sliders gray out, the photo reloads, then the sliders become active again.
    Many folks say it is caused by the program writing to XMP, to turn "automatically write to XMP" off. Does NOT work!  It is not the root cause.
    Bampton says to flick to the next photo. Does NOT work. This is not normal behavior.
    What will work to stop the activity is to close and reopen the program. This is not normal behavior.
    This will not occur if the file(tiff or PSD) is written by Photoshop. If you are using 4.X and CS6 then Photoshop will write the file at the end of your session in PS. No blinkies.
    If you are using 3.X and CS5 together you will not experience the problem since again PS writes the file. No blinkies.
    If you are using 4.x and CS5 or under you will encounter the problem, blinkies!
    I have not encountered the problem with any file written by the OS or any other program.
    The problem is ONLY with tiffs or PSD files created by LR for external editing. It would seem to me this is a bug.
    It is not a major bug, but annoying.
    I have filed a bug report again here......http://feedback.photoshop.com/photoshop_family/topics/lr_continuously_refreshes_the_image_ in_develop_mode?rfm=1
    Please drop by and sign it...........maybe we can get some attention this time. I filed a bug report before, but can't find it.
    Thank you for your time,
    Rich

  • Create a Developer Site, my Admin site doesn't show the drop down

    I have a O365 Admin account and want to create a Developer Site. I tried to follow the instructions at
    http://msdn.microsoft.com/en-us/library/office/jj692554(v=office.15).aspx , but when I get to step 2 of 'Create a Developer Site', and click 'Admin', instead of a drop down being displayed, it takes me the a 'Welcome, let's
    get started' page and there is nothing about Developer Site there.
    Should be:
    but I get:
    Am I missing something?
    Ron.

    I'd ask them over here.
    Office 365 Sites and document sharing forum
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Why is the cloning and healing tool in lightroom 5 no longer showing the stamp where it is replacing from?

    When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.

    The source should show on both Heal and Clone.  Hit the H key to turn them off and on or pick one of the options in the Toolbar.

  • I purchased the Photoshop CC subscription but Lightroom 5 doesn't show as an available download

    I'm running a Dell XPS 17 with windows 8.1. Photoshop installed fine.
    Any help would be great.

    Try opening the Cloud app, signing out and signing in again.

  • Hi people new kid on the block. just imported to iphoto and made a slide show, but photo's in wrong order, how do I move  them about? cheers

    Hi every one question please?
    Just imported photo's to my mac iphoto, great, but made up aslide show viewd by dates but photo's all over te place out of sinc, how can I move them about  in order please ?.
    New kid on the block.

    In the slideshow mode there will be a slide tray at the top of the window.  There you can move photos to where you want them in the play order:
    OT

Maybe you are looking for

  • Open Pages documents from an older version

    I need to open Pages documents from an older version of Pages that I saved to an external drive from a computer that I no longer have access to.  My current operating system is 10.7.5 and I can't upgrade it right now.  I see that Pages 5.0 requires 1

  • 1 of my HD partition suddenly can't mount and want me to initialize! HELP!!

    Hi, If anyone who frequented these kind of problems before please let me know your solutions solving these problems. Thanks very much!! I'm a musician and a frequent mac user,I have a Power Mac G4 dual 800 with 1.25GMhz ram running on Mac Os 9.21 but

  • How to get the OUT value of a PL/SQL procedure?

    that is to say, I want to get a number form a procedure which code is familiar to: create or replace procedure get_salary( name in varchar2, id in varchar2, salary out number In java code, How to get the value of salary? PLZ

  • Is there lead in the Mag Safe power adapter's cord/cable?

    I was just wondering if there is lead in the Mag Safe power adapter's cord/cable specifically, and if there is any in apple's cords/cables in general. I couldn't find anywhere to email apple about it.

  • Response message became too slow, after transported to Consolidation Sys!

    Hi guys, I have a sync interface with BPM who calls an HTTP service. In development system things work fine and the interface is really fast. It gets a response from HTTP service in a few seconds (also with big messages, over 2 mega bytes). After tra