The need to read
elo all
staight to the problem:
i imported a antec true550 out of the UK(i live in South Africa) not knowing its a EPS12V...
Now im stuck with a shweet PSU that doesnt work on me Mobo.
(eps12v has a 24pin mobo connector and ATX12V has).
I know you get converters (24 -> 20pin) for dum asses like myself but i can't seem to find a company that
does international shipping. so im stuck with my finger up my @ss.
can any1 help me with this prob.
thanks
Yes there HAS to be a Company that Ships International, as MOST PSu's over 500 Watts are Indeed "eps12V" Spec., as I know that Both of my PSU's are, And I cant For the Life of Me, Beleive That Freakin ANTEC does NOT supply the 24-20 pin Adapter, as you are the 2ND Member to Reveal this .I would Call ANTEC and Tell them To Send you an Adapter ASAP, as they MUST have them....Why dont you try http://www.tigerdirect.com ..As I am Almost sure that the Ship Overseas, and I am Sure that they have the Part in stock ................Sean REILLY875
Similar Messages
-
When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back! -
I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.
This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks! -
Hi guys!
I really need help. I tried to back up the data on my iphone 4 on the iTunes version 11.01 but failed.
The error message read : the backup was corrupt or not compatible with iPhone. can anyone advise me on this,
as I urgently need to back up my phone in anticipation for my iPhone 5.
Greatly appreciated!this usally happens when the backup you tool was from an old ios version. Two options that you can try is
1. Delete the back up by going to edit> preferences> devices & delete back up on itunes & try backing up again
2. Update the ios software of the iphone4 & then take a back up. then try restoring
Taz -
I Cannot download apps
wwhen I try i am told I need to read and agree to iTunes new terms
wwhen I agree I am told my session has timed outForgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.
Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.
-
Which version of Adobe Acrobat is needed to read .pdf files on the iPhone?
I have Blackbaud's iBBDemo4.exe iPhone simulator for Windows XP. I'm trying to view/read various .pdf files with it. I received an error message that says, "file uses a new format that is not supported by the current version of Acrobat." Does anyone know which Acrobat version is needed for .pdf files on the iPhone and/or iPhone simualtor?
The iPhone has it's own built in PDF reader, and doesn't need Adobe Reader. So if your simulator software isn't working then I suggest you contact Blackbaud's support. Besides, Adobe doesn't make an iPhone version of Reader.
-
Search help - Need to read dynpro of the calling program
Hello all,
We have a requirement where we need to read the dynpro of the calling program of a search help.
Say I have a screen (selection screen, module pool or ALV grid etc) where I have a field PARTNER with whom a custom search help is attached. But on this same screen there is another field RLTYP. What we want is that when an F4 is taken on PARTNER, the value of RLTYP should also be passed as value to the Search help exit.
In short, we need to read the screen fields of the calling screen of a search help.
Any ideas are appreciated.
Regards
PriyankaCheck the sample code:
FUNCTION F4IF_SHLP_EXIT_OFFRCONT.
""Local interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCT
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
DATA : ws_flag(1) TYPE c,
ws_rec(1) TYPE c.
DATA : i_dynpfields TYPE dynpread OCCURS 0 WITH HEADER LINE.
DATA : ws_data TYPE ddshiface,
i_data TYPE ddshifaces.
ws_flag = 'X'.
ws_rec = 'X'.
IF ws_flag = 'X'.
i_dynpfields-fieldname = 'P_CUST'.
APPEND i_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = '1000'
TABLES
dynpfields = i_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
READ TABLE i_dynpfields WITH KEY fieldname = 'P_CUST'.
ws_data-shlpfield = 'ZCUSTOMER'.
ws_data-valfield = 'G_SIMFIELDS-FIELDNAME'.
ws_data-value = i_dynpfields-fieldvalue.
APPEND ws_data TO i_data.
ws_data-shlpfield = 'ZOFFRCONT'.
ws_data-valfield = 'P_CONT'.
ws_data-f4field = 'X'.
APPEND ws_data TO i_data.
LOOP AT shlp_tab.
IF ws_rec = 'X'.
shlp_tab-interface[] = i_data[].
APPEND shlp_tab.
ws_rec = ' '.
ENDIF.
ENDLOOP.
DELETE shlp_tab INDEX 1.
ws_flag = ' '.
ENDIF.
ENDFUNCTION.
Regards,
Prakash. -
Need to read messages from the log instead of displaying
Hi,
I need to read all the messages from the log with a particular log no..
i was able to display it using FM BAL_DSP_LOG_DISPLAY..But i want to collect the messages instead of displaying..To display according to my requirement..
Thanks in advanceUse this for reading :
BAL_LOG_MSG_READ
Regards
Neha -
Function module needed to read all the BOM statuses
Dear Friends,
In a report we are using CS_BOM_EXPL_MAT_V2 function module to get the dispaly the BOMs. But it is displaying only the BOMs which are in Active stauts e.g 1 & 3.
My requirement is needs to read both active and inactive BOMs. Inactive BOM status is 2.
suggest me if there is any another FM or any another way to get all the BOM status materials.
Thanks for your help.
Srinivas.You need to supply another application for alternative determination (field CAPID). It should be possible to customize one for your needs using "Define Order of Priority for BOM Usages" and "Define Applications" under "Production->Basic Data->Bill of Material->Alternative Determination"
Edited by: Carsten Grafflage on Aug 5, 2010 1:44 PM: Corrected one string from customizing - sorry. -
I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.
Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun -
My free Adobe Reader has expired. I tried uninstalling the Reader and installing the new Free Reader trial, but my system still will not open a PDF file and states I need to subscribe to Adobe. Any way around this?
Thank you.
On Thu, Jun 26, 2014 at 9:44 AM, Bernd Alheit <[email protected]> -
What is the need to break a VI when a local variable in read mode is unconnected?
What's wrong with an unconnected "read" local variable?
A control terminal (or indicator terminal for that matter) can exist on the BD without issues!
Use case: When I create a new control, I may want to drop a few local variables in different cases of an event structure to be connected later.
If in addition, I am planning to create a few controls, to be used in several cases, this is quicker than dealing with each case one at a time.
I'll just grab the terminal, create a local variable for it, copy it and then paste it in all the cases I need it in.
Then repeat with another control and finally, deal with the bunch of local variables in each case later on.
I would like to be able to run the VI without having to treat all cases, which I can't right nowm because the VI is broken as long as there remains at least one unconnected "read" local variable.
Again, I cannot fathom why the compiler would be unhappy with a "read" local variable unconnected to anything. Generate a copy of the data if you wish, don't use it, that's all!
I can see the problem with a "write" local variable, although I would wish an unconnected "write" local variable would be simply ignored. And probably the same should be done with an unconnected local variable: no copy should be generated.
Of course, a warning would be useful.Then put it on the IE (assuming it's not already there) and see how it fares. Personally, I think I prefer the current situation for safety (i.e don't forget to use the code you actually put in), but I wouldn't be terribly broken up if it behaved like you want.
Try to take over the world! -
I have successfully built a vi which communicates with a piece of equipment via the serial port using ASCII characters. I am trying to replace the older versions of Serial Read and Write VIs with the VISA Serial Read and Write VIs. The VISA Write works fine, but the when reading data coming from the "box", the VISA Read VI returns string data with foreign looking characters instead of the usual correct ASCII characters as shown by a dumb terminal which is in parallel with the serial data line. Is there a special property node which needs to be configured on the VISA Serial Read vi, or do I need to set something on the VISA Configure Serial port v
i?
Why aren't the VISA serial vis compatible with the older serial vis?
Thanks...Usually, garbage characters are an indication of a baud rate or parity mismatch, or maybe a stop bit or number of data bits setting. Make sure that you have configured your port correctly with VISA Configure Serial Port. I have used VISA serial successfully many times.
- tbob
Inventor of the WORM Global -
Need help- need to read a customer table from the payroll schema
Hi gurus,
I need to read an amonunt from a customer table in the payroll schema. Is it possible to input TABLE XXXX in the schema, or is impossible to read from a customer table?Do I need to create a report to upload the amount in an infotype?
Thanks in advanced for for support!You should create your own custom operation (based on operation TABLE) to read your custom table from a Payroll PCR.
If your custom table's name is longer than 5 characters, you may be required to use operations VAOFF and/or VALEN prior to your custom operation in the PCR.
Maybe you are looking for
-
Error reads. Could not access network location %APPDATA%\\
-
Analysis does not show all rows returned by SQL
Hi. OBIEE 11.1.1.7.0 I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of
-
PLZ help me out i'm very new and confused to java
Hi~ I'm very new to java and I just brought a phone (Nokia 6670). It's capable of J2ME, as it says in the instrusction book, but I'm not so sure which Java to download. (THERE ARE SO MANY). Please help me out, I'm not sure what to do, since I'm putti
-
SOAP Exception from XI to R/3 via RFC
Hello, We have a scenario where we are mapping SOAP Exception to RFC Exception. Message status is application error in SXI_MONITOR and in payload,it shows correctly mapped RFC Exception (SOAP_EXCEPTION) with name and message. But this message doesn't
-
BT no-show then lie saying engineer appointment wa...
I see other people also have this problem so to draw attention to this I will post what happened to me for the record. Yesterday an engineer was booked ( third engineer visit in 5 weeks) between 1pm-6pm to my home at old windsor, I called up 3 times