The network does not support the requested encryption method

Prior to last night, I had connected to several wireless networks without issue, so I know my computer can do it. The issue started after I reinstalled the operating system. I connected to my friends wireless network last night with no problems, using the password. My system was having other unrelated problems so I decided to reinstall the operating system since the computer had just had a new hard drive put in anyway. Then when I tried to get online after everything was up and running, I couldn't.
Wireless networks show up fine, but when I go to log in, enter the password and hit connect, after a second I get the error message : "The network "name" does not support the requested encryption method". I've scoured the help topics, searched high and low, and tried everything. Please help
Message was edited by: Eden51086

After you reinstalled the OS, you may need to download install any Airport Updates as well.

Similar Messages

  • The server does not support the requested critical extension (0x8007202c)

    Hello guys,
    The sympton is the same as the one in "The
    server does not support the requested critical extension." Exception.
    I got the error in calling IDirectorySearch::GetNextRow. As I observe, the error is trigger when retrieving the another page of records. The LDAP path to connect is "GC://<FQDN_of_GC>". The search filter is (&(|(objectClass=group)(objectClass=msExchDynamicDistributionList))(mailnickname=*)).
    There are about 100 thousands of group objects in the forest. So the answer in that thread does not help.
    Any thoughts?
    Thanks.
    [email protected]

    Hi Michael,
    Thanks for your remind of the server is Windows 2008 R2. 
    After deep research on this topic, there were a couple of possible causes. One was based on asking AD to do sorting on the results of the query. Our calls to AD do not do any sorting at all. The other I came to was a couple of pages that may help alleviate
    the problem of groups in large AD environments. It has to deal with the temporary table size that Active Directory uses, with the tunable parameter MaxTempTableSize.
    The articles as below are for your reference:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/95bfb95f-4e43-4dd8-ac3a-0c89d2cf528e
    http://support.microsoft.com/kb/315071
    http://msdn.microsoft.com/en-us/library/ms677927(VS.85).aspx
    Besides, if the above is not the cause of our issue, there may be something wrong in the C# code. Since I just an AD engineer and not familiar with the C# code, I suggest you should involve one C# code engineer to work with us about this issue. After doing
    many research, please add the class of the object when searching. For example, “DirectorySearcher ds = new DirectorySearcher(de, filter,class)”. I’m not sure if it’s correct, just a suggestion.
    Hope to hear good news from you soon. Happy X'MAS day!
    Best regards,
    Bryan

  • The Organizer does not support the color space in the file

    I just purchased and installed PSE 8 as an upgrade to PSE 6.  My catalog correctly shows all of my existing images.  However, when I try to import photos into the Organizer, I get a message that nothing was imported.  The reason given is that "The Organizer does not support the color space in the file."  This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS.  Any suggestions?
    Here is my system information:
    Elements Organizer 8.0.0.0
    Core Version: 8.0 (20090905.r.605812)
    Language Version: 8.0 (20090905.r.605812)
    Current Catalog:
    Catalog Name: My Catalog
    Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
    Catalog Size: 83.9MB
    Catalog Cache Size: 459.8MB
    System:
    Operating System Name: XP
    Operating System Version: 5.1 Service Pack 3
    System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
    Built-in Memory: 2GB
    Free Memory: 829MB
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: 7.65
    Adobe Reader Version: 9.2
    Adobe Acrobat Version: Not installed
    CD and DVD drives:
    J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • BPE_adapter The process does not support the given synchronous interface

    We are using PI 7.0 Sp 14 .
    Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
    Our scenario is Extern system send SOAP call to PI  - BPM_SYNC_ASYnc_process --> BPM Proxy_send 
    this BPM proxy_send   to ECC R/eceiver at R/3
    We are getting the following error after migraiton. Please help
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
    -->
    Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
    <SAP:Retry>N</SAP:Retry>
    </SAP:Error>

    Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
    Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
    Thanks

  • Win2012R2 error 364 Content file download failed.Reason: The server does not support the necessary HTTP protocol.

    Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
    System
    Provider
    Name]
    Windows Server Update
    Services
    EventID
    364
    Qualifiers]
    0
    Level
    2
    Task
    2
    Keywords
    0x80000000000000
    TimeCreated
    SystemTime]
    2014-08-27T06:43:36.000000000Z
    EventRecordID
    390
    Channel
    Application
    Computer
    wsus-server.murrcz.local
    Security
    EventData
    Content file download
    failed. Reason: The server does not support the necessary HTTP protocol.
    Background Intelligent Transfer Service (BITS) requires that the server support
    the Range protocol header. Source File:
    /msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
    Destination File:
    C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
    The online help not works:
    Content download has failed. BITS service is not starting or is  stopping during downloads.
    Open a command window.
    Type sc config bits start= auto
    Type net stop bits && net start bits
    Type net stop wsusservice && net start wsusservice
    Start WSUS 3.0: Click Start, click Administrative Tools, then click
    Microsoft Windows Server Update Services v3.0.
    Click Synchronization Results.
    In the Action pane, click Synchronize Now.
    Verify
    Look for the corresponding error event.
    Open a command window.
    Type cd <WSUSInstallDir>\Tools
    Type wsusutil checkhealth
    Type eventvwr
    Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
    The KB922330 not aplicable, ExecuteSQL.exe not present.
    Please help.
    Thanks

    .\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
    This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
    The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
    Either your device is misconfigured, or it needs a firmware update to support the full specification.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Yesterday i made some purchases in itunestore. the download went well. till the synch of itunes with ipod. some of the downloaded music did noch synchronize. the message was: the ipod does not support the file format (mp4). strange, right?

    Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?

    For music files purchased via the iTunes Store, Apple has used the following file extensions -
    .m4a unprotected AAC format music files
    .m4p protected AAC format music files
    .m4b protected Audio Books
    .m4r unprotected ringtones in AAC format
    As you can see Apple have never used .mp4 for music files via the iTunes Store.
    For videos Apple use .m4v and these are in H.264 format.
    You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it.

  • Script error (the object does not support the property or method of loaded0)

    I am getting a script error each time I "run" my site from Dreamweaver (F12). It says something like:
    "The object does not support the property or method of loaded0, code0, url https://apis.google.com" etc etc "Do you want to keep running the script?"
    (I just get it in a different language, so sorry for the translation). What have I done wrong here?

    I am using internet explore, with yahoo as my "startpage"
    These two have different urls, the last one is the one I got today when I didn't have Dreamweaver open. I rarely use google.

  • Just changed my router to Airport. Mac  Lap top and IPad works OK except my VAIO desk computer. It says that airport does not support the setting of the computer. Check the security setting. Whar

    Just changed my router to airport extreme
    My MacBook pro and iPad work fine but my VAIO wireless  desk computer is not working.
    It says
    , the router does not support the network .check security setting.
    Which of the security setting will I change?
    Thanks for your help.

    John, thanks for the email so quickly.
    I too hope I haven't tried "everything" either but I am reasonably technical.  I had done what you suggested to do before but I did both again.
    Ethernet is yellow in the left side bar.  In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
    I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both.  I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail.  I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
    Thoughts???

  • 'organizer does not support the colorspace in the file' PSE 9

    Does anyone know how to fix th eproblem of PSE 9 Organizer not importing a jpeg picture because 'The organizer does not support the colorspace in the file', short of a reboot?
    And no the obvious 'fix the colorspace' is not the solution. This has happened to me twice in quick succession. First it was one of a batch of photos all taken at the same time, with the same camera, with the same settings. I missed checking the first of the batch when downloading them to PSE, then when I came back to this photo after downloading the rest of the batch I got the colorspace error.
    The second time it happened was when I deleted a file from the catalog (but not the hard drive) and tried to import the smae file (that was previously in the catalog0 and all of a sudden the colorspace is not good enough for PSE.
    Actually when this happens PSE is not prepared to recognize the colorspace of any picture file (well ok, gif, png, jpg and psd) and a reboot is required.

    Please open one such file in PSE9 Editor? Does it open fine. Do a save as if it does.
    Another solution could be opening this file in IrfanView which is freely downloadable. Did you happen to edit these files in between? Sometimes, file headers get corrupt due to edits and hence Organizer or Editor refuses to open them. From my observation on this forum, opening the file in IrfanView once and doing a save operation there fixes the problem most of the times.
    Thanks
    Andaleeb

  • Why the iPod does not support Thai language

    Why the iPod does not support the Thai language? iTunes supports it. If I drag a song with ID3 tags into my iPod the title becomes blank. If I remove the ID3 tags the title displays but the enconding of the characters are inccorect.

    Why the iPod does not support the Thai language?
    The languages supported by the iPod are listed in detail in its tech specs:
    http://www.apple.com/ipod/specs.html
    Hopefully future versions will expand the list to included Arabic, Hebrew, Thai, Vietnamese, Hindi, etc.

  • Best way to announce that the hardware does not meet the minimum requirements

         Hi Everybody!!!
         I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
    to use does not meet the minumum requirements.
         In a nutshell:
     * I just created a game using Direct3D / DirectX 11,
     * I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
    much died in my arms).
     * According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
    the customer detailing the Direct3D requirements."
     * I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
         I don't have much knowledge about the current trends:
     * I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
    is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
     * I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
     * I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
     * Then again, displaying that message in a command prompt may not be the best idea either.
         Any help is greatly appreciated!!!
         Best Regards,
         Tarh Ik
    Tarh ik

         Hi Chuck,
         I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
    a museum). The crash started as a driver unload call, and after that everything goes down.
         I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
         What I finished doing was to create two sets of shaders (pixel and vertex):
     * If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
     * If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
    that the computer did not match the hardware requirements.
          It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
          Best Regards,
          Tarh Ik
    PS: This posting has been posted "AS IS"
    Tarh ik

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

Maybe you are looking for

  • Sort Table command no longer works in Numbers 3.2.2

    I am running OS X 10.9.4 and recently updated Numbers to 3.2.2 on my Macbook Pro. Since then I have been unable to sort a table which uses cells referenced from other tables. I have re-created a very simple set of tables to illustrate the problem. Ta

  • A Unix question: find command

    Hi all, Sorry for posting a Unix question here. In the following directory I have: /opt/SonicSoftware/SonicMQ/samples/TopicPubSub/DurableChat>ls DurableChat.class DurableChat.java Readme.txt However, if I try: /opt/SonicSoftware>find -iname DurableCh

  • Folders are missing in windows 8.1 after inserting pen drive.

    I have windows 8.1 in my laptop.i had some files in the drive c:\users\my profile\downloads folder and also in e:\downloads folder.I connected pen drive to my laptop.scanned with anti virus no virus found.My anti virus signatures are updated till dat

  • Not able to start Gnome via GDM

    I have just installed Archlinux on an old laptop (HP ZV5000), which I want to bring back to life as there is always a long queue to us the other PC in the family Everything went smooth, except the last step: when I try to login via GDM, the screen be

  • Map directions won't load unless using current location

    Does anyone else have this problem with the Maps app? If I map a location, then ask for directions to or from my "current location," the routes display immediately. But if I try to use any other location (for example, from my contacts), it displays a