The "network.IDN.whitelist.la" setting in about:config is being ignored

Hi,
By default .la domains are not enabled to show IDN names (they get converted to punycode).
I want to override this just on my PC so I created the new setting network.IDN.whitelist.la as a boolean and set it to true. But when I navigate to
http://xn--ls8h.la/
( http://

Hello,
Is this really worth any amount of troubleshooting whatsoever? A turd emoticon domain name, displaying nothing but said emoticon.
* http://blogs.msdn.com/b/michkap/archive/2012/02/27/10273315.aspx
As you can see from the screenshot, manual whitelisting works with the following site.
* http://xn--gmq498agtkrpk40y.la
* http://看護師求人.la
If the other one doesn't work, then it's probably because symbol domain names aren't supposed to be allowed. I thought the ''network.IDN.blacklist_chars'' preference would be the place to look, but I didn't see the character there.
* http://unicode.org/faq/idn.html#6
* http://unicode.org/cldr/utility/idna.jsp?a=%F0%9F%92%A9.la
''cor-el'' wrote:''
This forum doesn't seem to be able to display this character
A font that supports the character must be installed.
* Windows 8, Mac OS X Lion, Mac OS X Mountain Lion: works out of the box.
* Windows 7: [http://support.microsoft.com/kb/2729094 update KB2729094].
* Other operating systems: [http://www.fileformat.info/info/unicode/font/symbola/index.htm Symbola font].

Similar Messages

  • My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

    My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

    Hello Nazer_502,
    I would be concerned too if my iPhone was acting this way.  It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT204400 my apple tv show "apple TV can't sign in to the itunes store until the network time has benn set."

    my apple tv show "apple TV can't sign in to the itunes store until the network time has benn set."... what is the network time ? how i resolve this?

    Ronaldo, I'm also in Brazil... It seems to be a problem with us... I've been searching the internet and many people have the same problem.
    I also have a thread open here... If you find a solution, please answer it here so that we can share.

  • TS3297 apple TV can't sign in to the iTunes Store until the network time has been set

    Having trouble signing into iTunes Store from my apple TV unit... I get the message: Apple TV can't sign in to the iTunes Store until the network time has been set.

    Ronaldo, I'm also in Brazil... It seems to be a problem with us... I've been searching the internet and many people have the same problem.
    I also have a thread open here... If you find a solution, please answer it here so that we can share.

  • [svn:bz-trunk] 10167: Add tests to test the enforce-endpoint-validation system setting in services-config .xml.

    Revision: 10167
    Author:   [email protected]
    Date:     2009-09-11 13:43:18 -0700 (Fri, 11 Sep 2009)
    Log Message:
    Add tests to test the enforce-endpoint-validation system setting in services-config.xml.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
    Added Paths:
        blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/user_classes/qa/CustomNetConnection.as
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/services-config.xml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/services-config.xml

    Revision: 10167
    Author:   [email protected]
    Date:     2009-09-11 13:43:18 -0700 (Fri, 11 Sep 2009)
    Log Message:
    Add tests to test the enforce-endpoint-validation system setting in services-config.xml.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
    Added Paths:
        blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/user_classes/qa/CustomNetConnection.as
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/services-config.xml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/services-config.xml

  • HT4623 After downloading the iOS 7 update, my wifi stopped working. (It grayed out) I was able to fix it when i Reset the Network Settings. However, it has gone back to being grayed out and that solution is no longer working. How do I fix it?

    After downloading the iOS 7 update, my wifi stopped working. (It grayed out) I was able to fix it when i Reset the Network Settings. However, it has gone back to being grayed out and that solution is no longer working. How do I fix it?

    After downloading the iOS 7 update, my wifi stopped working. (It grayed out) I was able to fix it when i Reset the Network Settings. However, it has gone back to being grayed out and that solution is no longer working. How do I fix it?

  • OS X Server - Setting Up Laptops properly to synchronize when connecting back to the network, OS X Server - Setting Up Laptops properly to synchronize when connecting back to the network

    I have a Mac Mini server (twin 500 gb HD) which I have had for about 2 years.  Mainly I have just played around with it, but never set up the server functionality to it's full extent.  I just clean installed OSx Mountan Lion (10.8) on the machine.  The two HD's are separate and not in a RAID configuration.
    With the release of 10.8 OSx, the server functions are now in an App you have to purchase and download.  No issue for me, but I would like some assistance and guidance from the community on how to properly set up the server for my needs (or if staying with the basic OS is fine).
    I have a couple of MacBooks, an iPad and two iPhones in the family, plus a remote Mac in another city.  The OSx devices will be upgraded to 10.8 soon, the iOS's are up-to-date with the latest os.  I also have a new Time Capsule running our network, but haven't started using it as a TM backup location (current backups are on local attached drives}
    I plan to use the Mac Mini with dual HD's primarily as the location where our media resides, regardless of whether it becomes a server or stays in the base OSx.   However, reading over some of the capabilities of the server ( 1 ), I'm hopefull I might be able to do more with the machine. 
    I'd like to be able to have a centralized user account managment via the Open Directory that the OSx Server provides.  Would also like to be able to set the other "client" computers / devices to allow for synchronization back to the server when they reconnect to the network after being mobile.   Also, it would be nice to set up the configuration of each of the users such that their preferences, iTunes media file locations, etc are consistent across all machines. 
    There may be some limitations to what I am attempting, that I am unaware of.  However, if at minimum I could accomplish the account managment easily, that would be a win.
    Assume I know little or nothing about domains and authentication -- not exactly true, but I don't want to assume anything with my limited knowledge.  I don't mind reading detailed step-by-step manuals if they are available, but I would appreciate some guidance and wisdom to get me started.
    Thanks for any help y'all can provide.
    Kirk
    (1) http://movies.apple.com/media/us/osx/2012/server/docs/OSXServer_Product_Overview .pdf

    OS X Server is an interesting beast, I am at work an IT Director in a Microsoft only environment, and am reasonably familiar with Linux/Unix having used it personally for many years.
    OS X Server is, as you will likely know, a combination of various open source packages (BIND, Postfix, Dovecot, Open Directory etc.) with an Apple 'wrapper'.
    I have recently got into similar situation as you, Apple gear at home (not one MS or Google product) and my old Linux server machine running Gentoo was long overdue for retirement. Let's get a Mac OS X server I said — it's based on *nix with the Mac front-end, what could be better??
    [rant]
    My experience after installing and configuring the whole thing — Mac mini + ML OS X Server ? Personally I think that Apple has gone backwards with Lion/Mountain Lion server. Trying to make a server platform act like an end-user product is a mistake. Servers are not end user machines — by their very nature they are sophisticated and may require complex configuring. Making some lollipop front-end that is claimed to be 'simple' simply by virtue of removing (necessary) configuration options ends up fooling no-one, and frustrating pretty well everyone.
    Tim Cook, if you're listening, the guys who made the changes to OS X server are on a par with the guys who made maps — sack 'em and please fix/improve OS X Server.
    [/rant]
    Phew that feels better. Having said all the above I will be sticking with ML Server — and keeping my fingers crossed.
    OK my suggestions to you are:
    First get some decent documentation I'm recommending the 'Apple Pro Training Series: OS X Server Essentials: Using and Supporting OS X Server on Mountain Lion' to people. You can get a Kindle edition on Amazon (I don't work for Amazon or the publisher).
    Make a dedicated new Apple ID for Apple Push Notifications, don't use your personal Apple ID. I made one like '[email protected]' where 'example.com' is my domain name. Get this ready before server install and make sure you can receive incoming emails to that email address.
    Make sure DNS is setup properly before installing OS X server. I have domain name and use the OS X DNS server to serve DNS in the LAN using that DNS domain. When client machines are on the Internet the DNS records point to the same server.
    Make sure the server name & host name are correct & match the public DNS records. Don't have the host name registered in external servers until you get the (internal) OS X DNS server running OK.
    After installing OS X server turn on DNS only first and configure it (read the book and remove the original domain based on the server name) and check that it is (basically) running OK and serving DNS (in the LAN) for your domain by checking Network Utility and finally also this command in Terminal.
    sudo changeip -checkhostname
    do not proceed any further unless this command returns success — don't.....
    Ideally purchase and use a real (not self-signed) certificate. I just got a simple (not wildcard) certificate. Make sure that is installed and working on the server. One good test is to get the certificate installed, assign it to the web server, open the OS X web server to the Internet and then go to
    http://sslchecker.com/sslchecker
    and put in the URL of your server, for example if you had machine called 'server' and your domain was 'example.com' with SSL certificate of 'server.example.com' this site should give you green checkmarks for all parts of the certificate chain.
    Only after the certificate is working OK proceed with turning on other services like Open Directory.
    If you start turning on a few services you will quickly need RAM, my Mac mini is running an i5 and is OK with CPU but the stock 4 GB of RAM is not enough. Swap memory is already going up to 2 GB, I will likely increase the RAM to 16 GB. 8 GB could be enough but don't want to buy to that level and find out after (as there are only two memory slots in Mac mini) that it is not enough.
    Read the book first... be prepared to reinstall the whole machine from scratch at least once. If something goes wrong at the beginning and one of the fundamental things gets messed up — don't bother trying to rectify it, and don't think that just re-installing Server will be OK. Wipe the whole machine including the base OS and restart from scratch.
    Setup OS X Server DHCP for the LAN and point DNS (for LAN clients) to the server DNS server.
    Bring up new services one by one and check they are functioning — use logs to check what is happening even if things look to be going OK.
    I found for email addresses and Open Directory accounts that the short name of the OD account had to be the same as that to the left of the @ sign of the email address. So if someone's email address is [email protected] then their OD account short name had to be 'fred'. Otherwise Dovecot (IMAP) will not deliver email. I am sure there is somewhere to fiddle with this so the OD account short name can be different but I didn't bother digging around at the time.
    Good luck!

  • I changed the "keyword url" setting in about:config to allow it to be used as a google search box, but when I exit and restart firefox it reverts to its previous setting.

    chrome://browser-region/locale/region.properties
    This is the URL that is in "keyword:URL" in about:config in my Firefox 4. I attempted to change it to http://www.google.ie/search?q= so as to use the address bar as a search bar. It works fine while Firefox remains open, but when I exit and come back later to open Firefox and use the address bar for search items I find that it has reverted to the default setting.
    Can you please help me resolve this issue?
    Thanks

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    You can start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

    Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?

    tim-bob wrote:
    Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
    If you haven't yet installed the Windows Support Software, that's probably why, so install it now.

  • How do I display more icons on the New-Tab page? I tried about:config

    The New-Tab page I see doesn't match what FF shows in help. I changed rows and columns and nothing changed.

    Hello,
    With the latest Firefox update, the number of tiles is now determined on screen size - if you zoom out or expand the window you can have more tiles appear.
    If you want to set a fixed number of tiles, you can do so with the following extension:
    * https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/
    You can also see '''jscher2000''''s Chosen Solution here: https://support.mozilla.org/en-US/questions/1025414
    It requires the [https://addons.mozilla.org/firefox/addon/stylish/ Stylish] add-on but will automatically shrink the tiles on the page and will limit the tiles based on what you entered for your rows and columns in the '''about:config''' page:
    * https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  • Firefox gpo is set in about:config but start page fails

    Hello,
    I have firefox adm & GPO 0.9.4 installed and working.
    I see where the GPO was been pushed to the clients in the about:config screen.
    The home button works correctly,
    But the startup page always comes up as the firefox splash screen
    and
    New Tabs open up blank.
    Here are my settings:
    Mozilla Firefox/Locked Settings/General Options
    Homepage - Enabled - 10.0.0.10:8000
    Mozilla Firefox/Locked Settings/General Options
    browser.startup.homepage - Enabled - 10.0.0.10:8000
    browser.startup.homepage_override.mstone - Enabled - 10.0.0.10:8000
    browser.startup.page - Enabled - 1
    browser.tabs.loadOnNewTab - Enabled - 1
    Is there something else I need to do?
    Thanks in Advance
    ~D

    What prefs are being set and to what values?
    Note that Firefox set some prefs automatically and may reset the Firefox profile folder if it detects a different Firefox version then has been used the previous time, so be cautious to set any prefs that deal with Firefox versions.
    See also:
    *http://mike.kaply.com/2014/01/08/can-firefox-do-this/
    *CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/

  • TS2972 apple tv can't sign in to iTunes Store until the network time has been set. this is an Apple generated message. what does it mean? how can i fix it? very very very simple questions but there is no reasonable answer from Apple anywhere on the intern

    this is an apple generated message. simple!
    what does it mean? so far no one at apple has a clue.
    how do i fix it? nothing even begins to address this issue so far. generalities about system setup show a lack of respect for customers. yes my system is plugged in and i have reset and rebooted and rechecked everything. i need help because this a real problem that needs a real solution, not more platitudes.
    help please, not more wasting of my time. i have spent an entire afternoon on this already.

    this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
    this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
    i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
    remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
    i have been to the local apple care store and they are clueless, too.
    should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
    at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
    thanks...sorry it was you who got this problem..

  • HT1551 My apple tv says:I can't sign in until the network time has been set, how do I set it???

    How do I reset network time?

    Make sure location is set correctly and DNS is set to ISP's. Try rebooting device and router.

  • Typing cursor when I click anywhere on the page (this issue is not in the other, probably something I changed in about: config)

    There is an screenshot: http://img35.imageshack.us/img35/73/problemfirefox1.png

    hello, please press F7 in order to leave caret browsing mode - then the behaviour should be back to normal...

  • Suddenly my 4 hour setting for requiring password is being ignored. Why?

    My display on my MacBook Pro sleeps after 10 minutes. But I have had it set do I don't have keep re-entering the password each time. And I also have it set to never sleep when the lid is open.
    My Security & Privacy settings are set to require a password 4 hours after sleep or screen saver begins.
    But over the past week every time the display sleeps I have to enter my password again to log back in. Why?
    Thanks,
    Doug

    That's something I never would have figured out on my own, that parent paths are a web server setting. The issue does only apply to the ASP includes, not any of the CSS files. I will have to call the web host to see how the server is actually configured. I will also do some testing just out of curiosity if these automatically inserted includes - even the one to the Connections folder are goverened by the site setting where you choose to use root or document relative links.
    I've always set my sites to document relative - but is one way better than the other or is it just a preference?
    The CC Desktop app is a weird duck. It took some doing to even get the Filters and Versions menu to display - but I'm now downloading DW CS6. I wasn't sure if this list was dependent on what I had had previously installed or not. The menu also didn't seem to display until after I checked Keep CC Manager up to date in preferences - but this could be just that I didn't see the menu before - it showed up to the left of the button area, and my eyesight is very narrow so I could have just not seen it.
    Thank you much - very much.
    Sorry, I wanted to mark both posts and correct answers but I guess the forum doesn't allow that or I can't find where to do it.

Maybe you are looking for

  • Dialog Box as "Do you want to save the changes?" in Forms.

    Hi, I have 4 datablocks in my forms that corresponds View. In the form design, I have a canvas(multiple inserting design) with two buttons that calls the other two blocks. Am inserting the records in the following way, In first record, am entering th

  • How do i convert my PDF files to an iBooks file?

    Hello I have been doing my school threw Penn Foster Career School online. I read my books as PDF files and open them in iBooks on my iPhone4 and iPad2. I was wondering if there was a way to convert my PDF files into iBook files so I can define,highli

  • What are the possibilities

    of using an older Airport Extreme as a router but without an internet connection. I want to use it as basically a LAN within the house. Is this possible?

  • How to get all materials of plant DE20

    Hello Team, I want all materials of plant DE20 , Could you please tell me how to get this ? Thanks in advanse! With Regards, Pritee.

  • How to Change the name of the Job scheduled in the background.

    Hi, I hava a program that has can run many reports based on the selection screen report selected. and this program runs in the background. When I run the  program in the background for seprate report selected in the selection screen.. the background