The new LaCie Hard Disk,by Neil Poulton Fried my firewire on macbook

Does anyone has any suggestion for more reputable brand name fire wire external drives?
The new LaCie Hard Disk,by Neil Poulton Fried the fire wire port on the Logic Board on My Macbook the other day.
Just so you know I received the drive brand new. I already had an older Lacie external hard drive mounted on the Macbook, when I attached the ne *Lacie Hard Disk,by Neil Poulton*; It mounted for a brief second and caused the old Lacie external hard drive to unmount from the system.The *Lacie Hard Disk,by Neil Poulton* damaged my old Lacie drive too In the process.
It did not take long before the new drive got unmounted too. No matter what I do I could not get any of the external drive to work on the Macbook.
I called Lacie support. They claimed It was not anything major just zapp the ram, repair permission, and turn off computer unplug the power take out the battery start the computer over.
I had already done of that with no success. Lacies support still insist It was not their drive rather than the system.
My mac Is 1 1/2 year old. I don' t have the Applecare coverage. I took the Macbook to the store. They tested and they decided that the firewire was fried on the Logic Board and had to be replaced for $350 and normally should have charged me $800 for a Logic Board replacement.
Now I have to spend $350 extra for repair after buying a $150 dollar *Hard Disk,by Neil Poulton*.
Lacie told me that even after my ordeal they were not liable for any damages.
My loyalty to Lacie Is shattered. I lost confidence In Lacie and would never buy another Lacie external drive again.
From now on I will only buy from Western Digital, Seagate, and G-tecnology, Inc.
By being prudent It caused me more damage by buying another backup drive.
I believe that Lacie released this try without enough testing In the lab and used me as their guinea pig to test their product. As a paying customer It Is unfair for Lacie to use such practice.

This thread is not being very fair.
I just bought a 1TB LaCie drive for my MacBook, and it works great. They are a reputable and experienced vendor overall. I am sorry if your Mac got damaged, but posting such major allegations against LaCie when you don't really have any proof it is their fault could potentially have some consequences for you. Frying a Firewire port just by plugging in a compatible peripheral is almost unheard of.

Similar Messages

How to initialize the new internal hard disk in LapTop ?

Folks,
Hello.
My LapTop model is HP Pavilion dv4-2045dx entertainment notebook whose host operating system is Windows 7.
Because the current hard disk capacity is not enough, I need to replace it with a new hard disk with bigger capacity.
After take out the old hard disk and install "750 GB 7200 rpm Western Digital Scorpio Black 9 mm internal hard drive" into my LapTop, how to initialize the new hard disk ? What is the host Operating System for the new hard disk ?

Please see the answer in your other thread.
Which external hard drive supports Oracle Linux 5 on top of VMPlayer ?

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Be sure you have prepared the new drive correctly:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Connection failed when trying to connect to external Lacie hard disk

I have an external Lacie hard disk which sits under and is connected to my Airport Extreme base station. I access that volume by using the 'Connect to Server' option in the finder, and I can see the Lacie drive when I get to the stage where I click to 'browse' and then click the Network icon.
However, today instead of connecting as usual (after asking for password authorisation, etc.) I now get a temporary window message saying:
"Looking up, "x1-6........local..." I guess the IP address?
After 3 minutes I then get the following error message:
CONNECTION FAILED
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
Yesterday I had a problem with my MacPro while trying to access info on the Lacie volume and with no response from the MacPro to shut down, I had to hold the start button down to get it to shut down. I then turned the Airport Express and Lacie disk off at the main plug powerpoint (I forgot to dismount the Lacie volume from another Mac running!). Hoping this would reset everything, but now this problem has happened!
Any help or advice on this would be much appreciated as I hold some key financial and business info on the Lacie volume and I can't access it now!!!
Thanks

Hi Rick
That's worked!
I did reboot Airport Extreme initially (had to switch off power to AEBS and Lacie disk as looks like there is no power switch on the AEBS?...and tried, but same problem. But then tried this again and all now works as before.
Thanks for your advice and the direct connection tip, which I was considering doing anyway if the conventional route didn't work.
Phew!

Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
from HardMac.com by [email protected] (Lionel)
At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
A solution has been found, the details are given by Rémy.
These tedious beeps occur when the disc is inactive and are caused by a system
to reposition the play-back head carried out in a repetitive way.
In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
After copying hdapm into your user file, the command to enter is:
sudo ~/hdapm disk0 max
disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
max is the level of APM which is a number ranging between 1 and 254 included
the word following are preset and can used in the place a number for the level of APM
max (maximum performance) is the parameter to use to eliminate the “beeps”.
min (maximum economy of energy)
default (returns to the default setting)
The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?
The music I want to move was in iTunes but is now just files. I had to reinstall a new iTunes and lost all my old music.
Thank you!

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

ITunes cannot write to my lacie hard disk

I have an iMac G5 that I recently upgraded to 10.4.10. I've had a 160 firewire lacie hard disk for over a year, and all of my iTunes content is stored and called from that device.
beginning today, I cannot add to my library, I am getting an error that says cannot read from or write to that lacie hard disk.
I've tried manually copying the files over via the Finder, and that is yielding an error (error code -36).
any thoughts? I've also had iChat problems since introducing 10.4.10, wonder if that's part of the problem.

I have an iMac G5 that I recently upgraded to
10.4.10. I've had a 160 firewire lacie hard disk for
over a year, and all of my iTunes content is stored
and called from that device.
beginning today, I cannot add to my library, I am
getting an error that says cannot read from or write
to that lacie hard disk.
I've tried manually copying the files over via the
Finder, and that is yielding an error (error code
-36).
Error -36 is an i/o error. This means that you almost certainly have a hardware problem. This might be with the FireWire cable; replace the cable. It might be with a FireWire port on the disk; put the cable into a different port. It might be with the FireWire port on the Mac; try a different port. It might be with the FireWire controller on the Mac; try a different Mac. It might be with the FireWire controller on the disk; put the disk into a different enclosure.
Unfortunately, what it's most likely to be is with the disk itself. I hope you have a backup.
any thoughts? I've also had iChat problems since
introducing 10.4.10, wonder if that's part of the
problem.
Unlikely.

New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7

New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7 workstation.
Windows 2008r2 hosts the hyper-v server. I can create VMs and VHD's when connecting to the server locally with the hyper-v manager.
The issue arises when I try to connect to the hyper-v server from my workstation which runs windows 7.
I have installed The Windows6.1-KB958830-x64-RefreshPkg.msu that was suggested for windows 7 sp1.
I can connect to the hyper-v server, create vm's but I cannot create vhd's the gui just hangs with no errors in event log or on screen.
The files are there on the hyper-v hard drive but i suspect they are just created by windows as they are written and are not valid.

I've had just the same solution. Both did Hang Fixed size and flexible.
Two parts were taken:
1 - KB939820 for Windows 2003 server based domain controllers
2 - disable using IPv6 on your NIC
Result - both types of VHD's are created normaly.
-----Infrastructure----
Windows 2003 Domain upgtraded to 2008R2
Windows Server 2008R2 Hyper-V - virtualisation clustered
Windows 7 Pro - Hyper-V management
Feel free to use --Mark as answer-- or --Propose as answer-- option and rate if a comment helps you or seemed usefull. -------------- Не забывайте использовать кнопки --От&#1084;етить как ответ-- или --Предложить как ответ-- и проголосовать, если
ко&#1084;&#1084;ентарий ва&#1084; по&#1084;ог или кажется полезны&#1084;.

Can I run an external display off the new LaCie 2Big Thunderbolt.

I currently run FCP 7 on a brand new MacBook Pro. I use the Thunderbolt port into a Thunderbolt to VGA adapter (third party) to run an external Asis 27" display. It all works quite well. But...
Right now I use a LaCie d2 Firewire 800 external HD as my scratch but would like to upgrade to the new LaCie 2Big Thunderbolt. I want to then run my external display (still using the adapter) off the second Thunderbolt port on the 2Big. Is this possible? My local Apple authorized store was very sceptical although they had never tested it, in fact, they haven't even sold a 2Big yet.
Has anyone done this? Am I going in the right direction. I don't want to pop for the 2Big (+$500) and find out the setup can't be done.
Thanks

Yes, I've demo'd this a lot. Thunderbolt out of a computer, to the drive, looped to a monitor. AND!! Thunderbolt to an AJA IoXT for broadcast monitoring, back out to the drive, then the drive to a computer display.
Boggles the mind, but it works

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L

About the amount of hard disk memory used during Testdrive installation

Dear all,
I have a question about installing SAP Netweaver Testdrive on Redhat Linux Enterprise 5.3. Currently I have a virtual machine (sun virtualbox) where Windows Vista is host and the guest operating system is RHLE 5.3 (32 bit). For doing several tests I would like to install the Testdrive on this linux system. Yet, the total available virtual hard disk memory is about 15 GB and I have already used more than 6GB.
Is there any way to specify the amount of hard disk memory used by Netweaver once it installs DB2 on the system? Because as it seems to me it takes more than 15 GB just for the database. But I'm not sure whether the whole space is really needed, particularly in my case where the aim of use is just for ABAP development and tests (for self-training).
Thanks in advance,
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Dec 5, 2009 11:23 AM

Hi,
You can refer the specific installation guide for the minimum disk space requirement.
Whatever functionality you use you need minimum space as mentioned in the installation guide.
You can configure slightly more memory than given in the installation guide to be safer.
Cheeers...,
Raghu

I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
Peter

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

The new LaCie Hard Disk,by Neil Poulton Fried my firewire on macbook

Similar Messages

Maybe you are looking for