The new OX has caused a problem with my dictation

After upgrading to the new operating system I can't always use my dictation feature, I have to restart the computer to use this feature.

You need to make sure you PIN of the BB is registered with the new account, and your emails are setup there.
http://eu.blackberry.com/eng/support/blackberry101/email.jsp
But also, make sure Orange provisioned the BlackBerry Data Plan to the account, sometimes people make mistakes and it might not have been activiated.
On your handset, go to Options > Advanced > Host Routing Table. Press Menu > Register. If you are set up correctly for a BlackBerry Data Plan, you should get a registration message in your Message folder within 15-20 minutes if not sooner.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I changed my ipad in warranty: the new one has a big problem!!

    I sent my ipad in warranty two weeks ago because of a problem with Home button.
    The new one has a bigger problem: the battery has a duration of maybe 1 hour!! I mean: i charge it, then i unlock it in order to run Safari. When i start the app, the buttery goes from 100% to maybe 93%.
    Other example: this morning it had 13% of battery. Just unlocking it, and using it to read some mails, the buttery went after 10 minutes to 3%!!!!!! it is absolutely unacceptable!!
    I tried so to go to the website of Apple, to order another changing of the iPad, but finally it gave me the error: Sorry, but you can't do this transition at the moment. Try again later o use the assistance centre. This since two days ago. How to solve it?
    I even tried to call the assistance centre but it said that all operators were busy, so i had to call later. and i did: every time the same...

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon.  The only thing that matters is the total amount of operating time from full charge to auto-shutdown (ignore any low level alerts that may appear).
    An irony is that doing a test (per the above procedure) to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.

  • The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

    The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

    Have you tried yesterday's update to iOS8.0.2?
    iOS 8.0.2
    This release contains improvements and bug fixes, including:
      •  Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
      •  Fixes a bug so HealthKit apps can now be made available on the App Store
      •  Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
      •  Fixes an issue that prevented some apps from accessing photos from the Photo Library
      •  Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
      •  Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
      •  Better support of Ask To Buy for Family Sharing for In-App Purchases
      •  Fixes an issue where ringtones were sometimes not restored from iCloud backups
      •  Fixes a bug that prevented uploading photos and videos from Safari
    For information on the security content of this update, please visit this website:
      http://support.apple.com/kb/HT1222

  • NEW VERSION has a serious problem with the recepient fields

    TO
    CC
    BCC
    old version I could paste from excel a list of email addresses into the TO field and it would work perfectly even if:
    they had a "," (comma) at the end of each email
    or if
    they had a line break (one empty row)
    TB would just recognize them as valid - for example:
    "[email protected],
    [email protected]
    [email protected]"
    would be treated as
    [email protected]
    [email protected]
    [email protected]
    ~~~~~~~~~~~~ NEW VERSION BUG:
    it chokes at both the comma and the empty line -- it sends the message but puts a comma as
    ",[email protected]"
    when sending the [email protected] line for example.
    PLEASE FIX THIS PROBLEM.
    THANK YOU
    Also I find the graying of the header section when not active to be annoying BECAUSE IT MAKES IT HARD TO READ (BLACK ON GRAY HAS NO CONTRAST) -- WHY MAKE IT SO FANCY AND BAD? TB IS GREAT ALREADY
    THANK YOU

    Hi Toad - thanks for the note. I saw that you were able to recreate it -- your first reply talking about importing addresses .csv etc. is all fine but the way I have used TB for years is as follows. I run several mailing lists etc.
    for example
    I go to excel
    and I copy let's say a 100 rows (1 column) that contain either
    ~~~~~~~~~~~~~~~~~~~~~~
    [email protected]
    [email protected], [email protected]
    [email protected],
    <BLANK cell anywhere>
    ~~~~~~~~~~~~~~~~~~~~~~
    THEN I go to TB - put curser in BCC field (change TO to BCC) - and hit paste.
    It pastes it as one line.
    THEN I press RETURN
    and it separates it to multiple BCC lines.
    This has always worked.
    The new version chokes at this
    AT THE BLANK LINE
    AT THE COMMA
    ETC.....
    Thanks for reporting it b/c it's a very important bug.
    ''Toad-Hall [[#answer-670828|said]]''
    <blockquote>
    I've just tested this on my system.
    Test one:
    Copy pasted two email addresses from a column in an excel sheet.
    One was above the other - no blank rows.
    Pasted as two email addresses separated by a comma.
    Sent and received ok, so the commas did not cause an issue.
    Test two:
    Created a blank line/row in excel sheet between the two email addresses, then copy pasted the two plus the blank line.
    In TO field this was shown as: email address followed by two commas then last email address.
    When sent this caused the second email address to become invalid. After fist comma, it added double quotes followd by a comma (where the blank line was positioned) then added another double quote just before the @ in the second email address. this made the second email address invalid.
    So it is definately not working with blank lines.
    First email received ok, second email returned a Mail Delivery Service Delivery Status Notification - Recipient address rejected: User unknown in virtual mailbox table.
    However, if you imported the .csv file as an address book, you could use it within Thunderbird. If wanting to send one email to several people, then create Mailing Lists. This does not fix your scenario, but it will resolve the issue of sending one email to a group of valid email addresses.
    Info on Mailing lists.
    * https://support.mozilla.org/en-US/kb/how-create-and-use-mailing-lists
    </blockquote>

  • Any way to disable the startup 'itunes has detected a problem with audio configuration'?

    I have a machine that I run iTunes on for pretty much just serving to my AppleTV.  It works great, but the machine itself doesn't have a functioning audio system.  When iTunes starts, it always gives a dialog about detecting a problem with the audio configuration, which I then click away and everything's fine from there (only after the dialog is dismissed does the machine show up in AppleTV's listed of computers, so Home Sharing's not enabled until after the dialog is dismissed.
    Is there anyway to prevent this dialog from happening?  Sort of like a checkbox for 'never tell me again' (although this particular dialog has no such checkbox).
    If there's not one 'in the box' with iTunes, does anyone know of an alternative, something that could automatically dismiss said dialog?  (I'd guess something like AutoHotkey could, but I'm trying not to reinvent the wheel here if possible.
    Thanks!

    Try going to the driver maneger then select search for new changes.

  • After install the new Firebox 4 I have problem with Babylon translator (english to greek) Pleasev help

    When I put the censor on an English word pressing simultaneously the Ctrl and right click (as exactly I acted before installing the new edition of Firebox 4) in order to translate from English to Greek the Babylon Machine dont work
    With the previous edition I had no a such a problem Please Help Thanks

    Try the WhiteSmoke Translator. It is completely compatible with all text-base programs and browsers and works directly from inside our WhiteSmoke 2011 interface allowing you to edit your text in addition to just translating it! You can download a free trial here and see for yourself:
    http://www.whitesmoke.com/landing_flash/writerLp4.html?d=4&a=136&r=3266

  • Change of mobile provider has caused a problem with BIS on my bb pearl

    Hi, hope someone can help.
    I have just changed mobile provider from O2 to Orange via sim only contract.  I had BIS set up when I was with O2 although it took approximately 2 weeks before my e-mails could be pushed to my handset.  Now I am with Orange, I have asked them to set me up with BIS, but, to date, I have been unable to receive any e-mails.
    Do I need to do something on my handset?
    Pretty desperate for a solution as I am having to pay for BIS with Orange and am paying for something I am not able to use at the moment.

    You need to make sure you PIN of the BB is registered with the new account, and your emails are setup there.
    http://eu.blackberry.com/eng/support/blackberry101/email.jsp
    But also, make sure Orange provisioned the BlackBerry Data Plan to the account, sometimes people make mistakes and it might not have been activiated.
    On your handset, go to Options > Advanced > Host Routing Table. Press Menu > Register. If you are set up correctly for a BlackBerry Data Plan, you should get a registration message in your Message folder within 15-20 minutes if not sooner.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IOS5 has caused a problem with bluetooth

    When I upgraded (as suggested by iTunes) to iOS5 all of a sudden my bluetooth in my Bose radio in my car and my GPS no longer recognizes my phone.  Anyone experience this glitch in iPhone4?

    Yeah... start your own thread and actually describe the problem you're having. This thread has been dead for 21 months and was regarding a version of iOS that's now obsolete.

  • Signing up for iCloud has caused freezing problems with my email.  Can I delete my iCloud account?

    iPhone 5, activated iCloud. Now my email is frozen. What should I do? Delete iCloud? accessing Settings "verification failed there was an error connecting to iCloud

    You cannot delete the iCloud account that is signed on to Find My iPhone unless you know the password. This is called the Activation Lock:
    ACTIVATION LOCK
    It is an anti-theft security measure that is a part of iOS 7. You can only get around this by following the steps in this support article:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    Contact your friend. This is the only way around the lock.
    Best of luck,
    GB

  • "iTunes has detechted a problem with your audio configuration"

    I have just recently found that my 4 month old iPod is not recognized by the computer no recognizing the computer. everytime i open iTunes, the message "iTunes has detechted a problem with your audio configuration. Aduio/video may not operate properly" comes up. songs will not play in iTunes (the store or when my ipod is connected, but they will play on my ipod by itself.
    Someone help!! i need my little ipod!

    http://docs.info.apple.com/article.html?artnum=304424

  • I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

    I suddenly encounter this error message from Fire Fox.
    Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
    I uninstalled the browser and download a new version but it does not resolve the issue.
    I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
    == This happened ==
    Every time Firefox opened
    == After something about security add-on of Norton pop up by itself. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

    This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

    New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
    Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

    This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

    can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

    Hi eddinchina,
    You should have no need to use the Old Sync account.
    As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
    You may use the same email address with both accounts.

  • Does anybody know if Windows 8 is causing a problem with iTunes?   Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Does anybody know if Windows 8 is causing a problem with iTunes?  Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  .  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I keep getting this diologue box as I start up Firefox "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. ... what should I do exactly?

    I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!

    See [[Could not initialize the browser security component]]
    Continue here: [/questions/780717]

Maybe you are looking for

  • Adapter Specific Messages

    Hi all, I need a help to access the Adapter Specific Messages in UDF. I have seen all the help/fourms and blogs for this. I got only the File Adapter Specific Messages. My need is to use this feature for other adapters too. As the first step, I have

  • Issue with clearing the Differences in 999 storage type in HU managed S.Loc

    Hi Experts, We are trying to writeoff the differences stocks which are there in 999 storage type, but getting an error message 'Quantity difference document line item for HU's' with Message class L6 & Message number 606. Any idea how this can be reso

  • JPA - One to Many persistence issue

    Hi All, We are facing an issue with one to many relationship persistence using JPA. We have a one to many relationship between Company and Personnel. When A personnel is created, the company(the parent in the relationship) is selected and that needs

  • Calendar - Increase the number of technicians in calendar view.

    I'm using the SAP Business ONE standard calendar to control my mobile engineers via 'service calls' and 'activities' Does any one know how to increase the number of technicians a user can see in the calendar view at any one time, even if they were gr

  • My Early 2008 MacBook Pro won't boot correctly

    alright so I have always wanted a macbook and I finally bought an early 2008 model from my friend due to he lack of cash to buy a newer one, so after a while it started booting slowly, like it would work but it would boot slowly, I tried to format it