The new project couldn't be created.

A box appears saying "The disk maybe locked, maybe full, try saving to different location. The new project titled appers as an empty folder. This happens when I wish to create a personal title for the project, but doesnt happen when I title the project "My great movie". I have cleared to disk space, and this problems persists.

Hi
How many hard disks Do You have ?
and free space on each of them ?
and in iMovie You set it in the Project window to show up as individual hard disks and the new Project addressed to one with enough space ?
Yours Bengt W

Similar Messages

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?
Note：Captivate 5.5
Thks

通过导入PPT新建的项目发布后,如何实现发布演示模式的SWF（自动播放）,而不是交互模式的SWF（只能点击才能继续）？

How can I add the new project? (for mac)

I can't add the new project. Who can help to do this action?

You have opened the Render Engine. Either you clicked on the wrong app or you have a fouled up text file in preferences. There are several threads on this forum that point to the solution.

How to relink clips THROUGH the new Project Library??

I updated everything to FCPX 10.1.1.
Some clips became unlinked. I go to link them ... and am stopped dead by the NEW Library Icon (with all it's internal folders no longer seemingly accessible). I know the file is in there - if I do a search in Finder for the missing media, it takes me right to where it is.
When I do a relink, stopped dead in my tracks by the new format.
How do I access the folders hidden in the new Project Library to relink my clips with their original media?

Ben Low wrote:
... when I go to 'locate' or 'search' for the missing file FCPX gets stuck at the door to the Project Library ...
you miss the concept of Libs:
Libraries are no 'real world' folders, just a 'register' where is what .. in best-of-all-worlds, all data (audio, video, stills, projects ...) are on the same drive - but the concept of Libs allows data spread all across your network But handled as 'one', e.g to finally-save Projects, outsource old data etc ...
A Lib acts like a (super-)folder, but isn't. Simple example: a 10GB lib could fit on a 2GB drive! .. if data is spread on some other drives. But Finder says 'here', due to use of hard- or sym-links. ....
... I read in my searches that one doesn't have to have one's media stored in the Library, but I haven't found a protocol yet for saving media elsewhere.
It's always in some LIb, but not physically... s.above ...
.. One thing I can't figure out: Folders. I love folders. I use them all the time to organize.
obsolete,
get familiar with the concept of tags/keywords/smartlists.
example:
a clip is tagged x-mas, grandma, 2002, funny scene .. one clip, one storage location, many ways to find it.
now, your old drawer/folder system: the scene with grandma wearing a funny hat ... do I have to dig in folder 'videos2002' or 'videos2003'? sub-folder xmas or birthday? or is it n my 'out-takes drive'.. but under what name? your one clip can only be in one drawer... but should be found under several keywords... sooo?
Folders = old school
tags = much more convenient.
(plus: you can use tags very similiar as your old folders... but a computer is much faster in dig'n-search than you, manually
concerning re-linking:
I once had the effect, a 'lost' drive had to be re-mounted:
the red-icon-of-terror (cam missing), relink doesn't came up with a suggestion; clicked on import from camera, clicked to my cam-archive on some drive - and WHILE doing so FCPX instantly found the old connection (no re-import nor re-linking neccessary)..
That drive was unintended un-plugged while using FCPX ..... never happened again.

How can I know the new Material Master has been created?

Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.

Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance

Having trouble with the "New Project" tab on the main menu.

Whenever I open garageband, the new project window doesn't display all of the icons. It only shows the Voice, Podcast, and Movie icons and none of these show the picture anymore. It used to start up fine and this just started happening a couple days ago. Has anyone else had this problem?

Have you installed Logic?
http://www.bulletsandbones.com/GB/FAQPages/MissingTemplates.html

PP 2014 8.1.0 When I "Save As" my project, quit and close, the new project freezes on launching

iMac (Retina 5K, 27-inch, Late 2014)
4 GHz Intel Core i7
32 GB 1600 MHz DDR3
AMD Radeon R9 M295X 4096 MB
Mac OS Yosemite 10.10.1 (14B25)
PP 2014 8.1.0
Blackmagic 4K media working in 4K sequences.
In my current project, I've been experiencing very strange crashes upon launching PP. Before ending my work for the day, I usually save my current project manually, and then do a "Save As" with tomorrow's date at the end, (projectname_2014-12-02) so I have a fresh copy to begin the next day and still have yesterday's as a backup. I then quit PP as normal. No issues. In other words, it closes just fine without any crashing or odd behavior.
In the last week, a rather annoying issue has presented itself. Once in a while, that new project that I created with Save As, will not open. I opens to the point when I can see my bins and my timeline, but as I would expect it to begin propagating the timeline with media, I get the spinning beach ball. I can wait for hours, and the project never loads. I can go back to yesterdays project and open it just fine, but any project saved with Save As, very often seems to be corrupted.
Except, that I can open it up fine on another machine. So it's not really corrupted. And it doesn't happen every time. Just most of the time in the last week or two.
I've done the following troubleshooting several times. Restarted the computer. Repair disk permissions. Launch PP with the option key to clear preferences. Cleaned the media database. Tried launching the project with all media offline. Uninstalled and reinstalled PP. Booted from USB OS install drive and repaired permissions, repaired HD, and even reinstalled the OS (not a clean install, just over the top of the previous one).
Once a Save As project won't open, it's done and I have to go back to yesterday's project.
Now here's where it gets really weird. If I create a new project, and import one of the "won't open" projects, not just a sequence, but the whole project, it's fine. Which of course isn't entirely surprising.
What *is* surprising is that after I save and close that new project with the old imported project in it, I can now go back and open all of the projects that would freeze on opening just minutes earlier.
Everything is right as rain again. I'm glad I have a work around, but it's a little unnerving and random, not to mention time lost troubleshooting this bizarre one.
Anyone else had any weird issues like this? Thanks for any thoughts.

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Can't start a New Project. Clicked New/Create. Then when I enter new project name and click CREATE

nothing happens.

I have the proplem using IE 10 on a Windows 8 OS. When I use Firefox 25.0.1 the issue didn't happen.
What I did notice is that in the IE 10 side, I have a new ID name. I didn't knowingly create this ID. The email associated with the new ID is the same as the ID that I use for the creative suite. The Firefox side used the old ID and had a bunch of template projects to start.

Using my Actiontec modem's wifi, it doesn't find my new airport express. When I use the new airport express network I created error message says ip address is wrong. Help setting this new airport express up

Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?

You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

I do not have the hdv option in the new project menu

Hello all as my title says I do not not have the hdv option in my new project menu. I have tried reinstalling and that did not work. Also I do own the software.

Welcome to the forum.
Check two things first:
When you go to Help>Transfer Activation, do you have that option, or is it grayed out?
Look at Export Settings, and do you have any HD Export settings?
If you do not have the Transfer Activation, or do not have the HD Export settings, then you full-paid version has likely reverted to the trial.
This was somewhat common with updates to CS4, but much more rare with CS5.
If your full-paid version HAS reverted, then follow these steps:
If possible Deactivate (probably cannot do this)
Uninstall PrPro
Download and run the Adobe Cleanup Utility CS5 several times, rebooting between each run
Install PrPro CS5
Immediately update to the latest version, before launch
Launch and test
Did that bring the Presets back?
Good luck
Hunt

Have VS Express 2013 for Web but need to add JavaScript .. how to add this Template in the New Project or should I...

Install Visual Studio Express 2013 for Desktop instead. Is there a way to have both installed on same machine? Or can I install some add ons (if so what) to get that feature in VS Express for the Web? suggestions?

Thanks for pvge42's help.
Hi Phillipk,
I agree with the pvdg42's suggestion, so if possible I suggest you can try the pvdg42's suggestion to install the VS2013 Community check your issue.
In addition, I suggest you can refer the VS2013 Express MSDN document to understand different project use the different version of VS2013 Express.
http://www.visualstudio.com/en-us/products/visual-studio-express-vs.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Premiere Pro crashes whenever I try to do anything whether in a new project or one already created. Any troubleshooting ideas?

I have already tried uninstalling and re-installing.

Windows 7 Enterprise on a PC Dell 64-bit. It's Premiere Pro Creative Cloud and it is up to date. When I first installed Premiere Pro CC months ago, I had this same issue - couldn't do anything, the program would crash immediately. I was on the phone with Adobe IT for 6 hours before it started working. No clue what the guy did to make it work. He did say sometimes the program will continue to run in the background so I should go to Processes under the Task Manager and if I see it running to close it. That fixed the problem for awhile. Then I didn't use the program again for a couple months. Now when I try to use it, it crashes, same problem as originally, only this time, it is not running in the background.
Any ideas to help me avoid a 6 hour trouble-shooting session would be great. Thanks!

From the initial screen when I select Video Editor, new projects there is a purple and black line appears below the new project but the program does not open up.

Please help me with the above problem.

What operating system are you using?
Have you manually gone to the nVidia or ATI web sites and downloaded the latest drivers for your video card?

New Project couldnu0092t be created! in NWDS

Hi experts...
I have trouble in creating the project in NetWeaver Developer Studio.
While i'm creating the project in NWDS SP9 ..I have selected project as J2EE ---> Web Module Project ... then I have gaven the project name ...dev.studio giving error message which is "New Project couldn't be created!".
Plesae tell me how to solve this problem!

Hi,
Check your permission on the folder, where you like to create your project, maybe its read only.
Some usefull hint: If you run into problems with eclipse or NWDS always have a look at eclipse's error log. You can find it under Window->Show View->Other...->PDE Runtime->Error Log. There you will see all errors forced by the eclipse runtime. The log messages are very needfull (most of the time).
regards Daniel

The new project couldn't be created.

Similar Messages

Maybe you are looking for