The new site design is...

awesome

abstracity wrote:I think it's awesome! Whoever was behind the page's design did an outstanding job, in my opinion. In the beginning, my feelings were the same as a couple of others here: I was not entirely swayed when I first saw the winning logo, whose creator did an equally fantastic job, by the way. I wasn't too sure if the new logo could accommodate a web layout that reflected Arch's rational elegance. I must admit that I had a rather pessimistic attitude towards the whole thing, and I think I am correct by saying now that the individuals who worked at the logo integration saw something that I did not.
Some of it might be a bit ugly for a while. I slapped all the headers in tonight without much regard for the colors quite yet. So there are still some tweaks to come.
abstracity wrote:I do have one question, though. Was Judd involved in the logo selection process and the site's re-design? It would be wonderful to know that the brainchild of this elegant distribution, the individual who was the one who conceived of this entire thing, played a part in the composition, or at least had given his genuine approval for the proposed logo.
To partially answer your question, Judd did vote on the logos with the rest of us, so yes we had his input

Similar Messages

OK, I have just changed nameservers but when I go to the new site I am redirected to the old. This only happens with FireFox and Chrome on my computer.

Everyone else can see the new site.. but when I punch the website address into Firefox... I am redirected to the odd site.
Now I have flushed the DNS (ipconfig /flushDNS) and I have cleared the cache, cookies and everything I can possibly clean I have...but it still redirects.
So there is something I am not doing above all that, that I need to do... any ideas what it is.
I have also gone into FireFox config and changed the network.dnsCacheExpiration as the preference name to 0
Thanks guys for the help.. as I am pulling my hair out trying to figure this out.

Do you want to try bypassing your ISP by changing DNS servers? You could try OpenDNS or Google Public DNS. One way to change this is at the Windows level (in the TCP/IP properties dialog), and another is in your router. Something more temporary would be to change your IE connection settings (I think it's under LAN Settings). However, the details are beyond what I can look up at the moment.

When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option. That has jump started iWeb for others. I could take a couple of tries.
If that doesn't work try the following:
1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iWeb folder.
Click to view full size
3 - launch iWeb and try again.
OT

I am trying to download the new CS6 Design Suite - not able to get past the previous version.

I am trying to downloat the new CS6 Design Suite and am not able to get past the previous version menu. Getting the message "This serial number is not for a qualifying product. Please try another." How do I get past this?

When you say "Download" do you actually mean install?
Which version are you upgrading from?
Could you try the solutions in the following article: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html.
Let us know if it helps.

I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. Can you help? Thanks

I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. i.e. The app tabs don't stay constant. This occurs while still in Firefox, and does not relate to when I close it. Has anyone got any ideas? Thanks

If you backed up the iPhone to either iTunes or the iCloud, restore the backup. If not, the data is gone.
(126342)

Nobody INobody I spoke to likes the new Notepad design we all liked The Yellow spoke to likes the new Notepad design we all liked The Yellow Notepad can we go back ?

Nobody I spoke to likes the new Notepad design we all liked The Yellow Notepad. Any thoughts ?

I much prefer the newer design.
Nobody I spoke to likes the new Notepad design ...
... until now.

The New Card Design for the Barclays Ring.

I’m here to announce that the new card design has been finalized and it will be ready for new cardmembers in late July and existing cardmembers beginning in October. Here’s a quick recap of the very fun and innovative process that we went through together to co-create the next Barclaycard Ring card.
In 2014 we asked cardmembers in an open forum to describe what they liked and didn’t like about the design of their current Barclaycard Ring card. We received hundreds of comments and passed them along to our design team.
This resulted in the following plastic designs
Option 1.pngOption 2.png Option 3.png
Incorporating your feedback, the designers created a three dimensional view of the card designs, which we posted in the forum for more feedback. This round resulted in four unique plastic designs that were presented for an official vote.
Voting results.jpg
The winner, with 42% of the voting Ring cardmembers, was card design #1. We also noticed cardmember feedback regarding concerns about the font choice for the most popular card design. We took this feedback to the design team and they presented four more options to the internal team. We picked one and now it was time to see how these designs looked in reality. About 10 weeks later we got a “proof”, or an example of what the card would actually look like. And I will tell you that it did not look good. Luckily, one of the designers went out to visit the card production vendor. They worked with the design and the production process to get as close as possible to the original design.
And here it is:
C11_card_rRGB_RingMC_EMV.png
We hope you like it! Thanks to everyone who voiced their opinion and helped to shape the new design. And, yes, it is a chip card. (Interested in learning more about the Chip and Signature with PIN enabled technology? Click here for additional details.)
So who will get the new plastic and when?
Starting in October 2015 cardmembers who made at least one purchase in 2014 will automatically receive the new plastic in the mail. Your credit card number and the security code on the back will not change. However, if your expiration date is within a 3 year window, your new card will have a new expiration date. So you will need to remember to update any recurring billers, online merchants or digital wallets with the new date. Your old card will still be valid until sometime in early 2016.
Cardmembers who did not use the card to make a purchase in 2014 or became Barclaycard Ring cardmembers in 2015 will not be automatically re-issued the new card design. If you’d like the new card (with Chip technology), you can call the number on the back of your current Ring card after August 1st and request the new card design. Otherwise, you can wait until your current card expires and you will automatically receive the new card in the mail. We may also choose to automatically re-issue the cards in the future to cardmembers who still have the original orange card.
I hope all of that helps. Of course if you have any questions just leave it in the comments below. Thanks again for participating in the design of the new Barclaycard Ring card!

I'm apart of that community and I was shocked to see that this is all they could come up with. In todays market with the different plastics available this to me is very quaint. Not appealing and to think they had a committee and designers and all that... it's truely disappointing!

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

How come i cant see my Cameras in the new site

Why have the new site up when you have to use the odl site to see anything!!!

Maybe:
iTunes Store: Invalid, inactive, or illegible codes
Next contact iTunes
Apple - Support - iTunes - Contact Us

The new column designed not appears in the form

Dear All Gurus/Experts,
I created new column directly in the database stored in the SQL server 2000,in table IGN1, right click --> select design table, then right click --> insert column, I write U_copqty, numeric data type, 9 is its length and allow nulls check mark.
I can't understand why the field is not appeared in the form settings like other columns so that I can thick and make it appear in the form IGN1 (receipt from production). I have read development training files but I am confusing if it is really need VB.net to do that. I also know about user defined field but it doesn't what I need because I have created UDF in the production order row but I can't find it in the receipt from production form, so I just did create the new field/column directly in its database but I fail to make it appear in the form settings when I need it to be available in the receipt from production form. would you pls help me ? I appreciate your answer. TIA
Rgds,
Steve

Hello Steve,
The reason you can not see the directly added field is because that there is another table CUFD which holds all the User Defined Field information. So, you need to add a new record in that table. However, the approach is really not SAP recommended. Directly handling database could be very risky. Please create the user defined field according to the steps.
Regarding why you can not view the field you created, did you create a row or document level field?
Hope this helps,
Nick

Am I the only one who hates the new mail design?

Selecting and moving mail to files has become a nuisance.
Why is it that when I wish to print an email only what's in the window will print?
Is there any way I can use the old design? When the new one was introduced, one had the option to use the old but now that option seems to have evaporated.
Please advise. Thank you!
Frustrated in Connecticut

You posted this in the Mail & Address Book - Tiger discussions which is for the Tiger Apple Mail and Address Book applications and you are referring to the new webmail interface.
The interface is new and there have been some bugs which is usually normal when something new like this is introduced. I haven't experienced any problems but I only use webmail access for my .Mac account if needed when I'm away from my Mac using another computer with internet access that is not my own which is what webmail access for an email account that can be accessed with an email client on your computer is primarily for.
Is there a reason you do not use an email client such as the Mail.app to access your .Mac account when using your Mac?

How can my client preview the new site I'm making for him?

Without taking print screens. Is there a way I can send him a 'staging' address for his site?

Same way .... you can still upload to Business Catalyst for viewing and then once you are done delete the test site and Export your site as HTML and upload to his server.
Or if you have your own third party host you can upload to there. It has to be hosted somewhere for your client to access it.

List of question to ask to business as a Site Developer for the new site creation or enhancement ?

Hi,
Please help ?
Thanks
srabon

Hi srabon,
As I understand you are about to create site as developer, I find some references relevant for you:
https://msdn.microsoft.com/en-us/library/ee231576.aspx
https://msdn.microsoft.com/en-us/library/ee231568.aspx
http://blogs.msdn.com/b/kaevans/archive/2013/10/24/what-every-developer-needs-to-know-about-sharepoint-apps-csom-and-anonymous-publishing-sites.aspx
If you have specific question, please create new threads and provide more detail information.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Replace SAP logo in status line in the new Signature Design (SAPgui 7.10)

Hello,
with SAPgui 7.10 there is a new desing available, the Signature Design. Recently a customer asked me, if it is possible to replace the small SAP logo in the middle of the status line (at the bottom of the SAP window) with another image.
I don't know this, has anyone an answer for me?

I doubt so (although I don´t know 100 %).
The bottom SAP image has the same functionality as before in the right upper corner (you can doubleclick it to send support messages to SolMan system). You couldn´t change the right upper corner image.
Markus

Personal thoughts on new site design

Thought 1:
Wow... this looks similar to APEX. I wonder if we could get some of the Region Plugins?
Thought 2:
Looking for the 'forum' I'm interested in seems harder than it should be.
My current process:
browse -> places
click on "spaces"
hope somebody in the group you're interested has posted
if yes, goto step 8 (click on that link)
if no, continue
click on the 'super group' (eg "Oracle Database")
spend 5 min hunting the desired forum [1][2]
click on that link
click on content [3][4]
look at threads
[1] a simple "order by upper()" would shorten the time to find it
[2] sometimes I'm just "browsing the forums" and looking around at what is available.
[3] Too much content in "Overview". I don't want to see any snippets of the most recent posts.
However, if there was a way to show/hide the snippets (with HIDE as default) that would be better.
[4] Due to the speed at which things change (especially irrelevant, not CURRENTLY interested topics), the Report with 'snippets' are like a mailbox full of SPAM.
Thought 3:
I'm making a post...now, how do I make the example CODE look clean when viewed?
Is it possible to add a magic button that will "Format and color PL/SQL" selected code?
(and can that be an Plugin for APEX?)

This isn't APEX. It is still Jive, but a newer version. Regarding code, you can in the advanced editor. Click the advanced editor link in the standard editor, then select your code and choose the double arrows -> Syntax Highlighting.
The code tags are apparently no longer necessary. (Which I personally welcome).

The new site design is...

Similar Messages

Maybe you are looking for